Supply, Installation, Testing and Commissioning of Fire detection, Fire Alarm and Fire Hydrant system for Central Library and Academic Block for P.G. Department of Botany and Zoology at Baba Gulam Shah Badshah University, Rajouri.

Amount

SITC of underground M.S Pipes (B class) including excavation,cutting, screwing, welding etc. and providing all fittings e.g flanges, bends, tees, elbows reducers, clamps, hinges etc. Underground pipes shall be wrapped & coated by providing twin coating of Bitumen wrapping with first coating bitumen coating Wrapping with bitumen Hessian cloth & finishing with Bitumen paint and re-filling the trenches etc of following sizes: (IS-1239/3589) a) 150 mm dia

Same as above but for over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes: (IS-1239/3589) a) 150 mm dia

c) 100 mm dia

d) 80 mm dia

e) 25 mm dia

SITC of single headed oblique pattern hydrant Landing valve with 63mm dia Instantaneous type female outlet complete with cap and all Accessories IS(5290(Type-A)marked.SS-304 grade

Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female ISI marked coupling and Riverted to hose pipe with riverts and copper wire.& ISI marked (IS-636)

Supply & installation of gunmetal 63mm dia short branch pipe with 20mm dia nozzle , ISI marked.(IS-903)

SITC of First aid hose reel wall mounting swinging type complete with drum & brackets, 25 mm dia ball valve & 20 mm dia 30 mtr long high pressure pad hose with shut off nozzle complete as req.(IS-884)

SITC of cast iron double flanged ISI marked Butterfly valve complete with rubber insertion, nuts, bolts, washers etc. of following sizes: (IS-13095) a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

SITC of following accessories: a) 25mm dia spring loaded air release valve with isolation cork.

b) Pressure Guage

c) Pressure Switch

d) 25 mm dia gate valve

SITC of cast iron double flanged ISI marked NRV complete with rubber insertion, nuts, bolts, washers etc. of following sizes:(IS-5312) a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

SITC of gunmetal Fire Brigade connection with collecting head 63mm,4 way instantaneous type male couplings with flanged outlet complete with blank caps nuts, bolts & rubber insertions, conforming IS:904-1983

Supplying & laying of 4 core 10 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core 150 sqmm Aluminum cable frommotor to electrical panel for automation of the system.

SITC of Air vessel 250mm dia and 1.5 mtr high withdished top, made of 6mm thick MS pipe complete with 25 NB dia gun metal air release valve, 20mm dia stop valve,25Nb gun metal pressure release valve,49NB drain valve , pressure guage & all accessories as req and painted.

Earthing with G.I earth plate (600 x 600x 6) mm thick including accessories & providing masonry enclosure with M.S cover plate & Watering pipe of 40 mm dia etc. as required with charcoal and Salt including excavation and back filling complete as required.

P/f 25 mm x 5 mm G.I strip from earth electrode, on surface or in recess for earth connections as required.

SITC of diesal Engine driven main Horizontal Centrifugal fire Pump suitable for automatic operation with bronze impeller capacity 1620LPM with 56mtr head with Diesel Engine of suitable HP,12V/24V starting equipment water cooled with 125 mm suction and 100 mm delivery ; with Base frame, coupling, battery fuel tank, AVM pads etc. complete as required. The pump shall be provided with mechanical seal complete as req.

SITC of horizontally centrifugal end suction pump complete for delivery 1620 ltr/ min against a total head of 56mtrs. With 40 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

SITC of horizontally mounted centrifugal pump complete for delivery 180 ltr/ min against a total head of 56mtrs. With 10 HP three phase motor with speed of 2900 rpm with bronze impeller and coupling, base frame and AVM pads complete as required. The pump shall be provided with mechanical seal.

Supply & installation of weather proof hose cabinetsfabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.

SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.

Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6zone Panel

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/ recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & Suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying & laying of 2x1.5 sq.mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying of clean agent type fire extinguishers 2 kg capacity. Complete with discharge arrangement, high-pressure hose pipe, leak detection tested and ISI approved with standard warranty .

Supplying ofABC type fire extinguishers filled with MAP-50 powder, 4 kg capacity. Complete with discharge arrangement, high-pressure hose pipe, leak detection tested and ISI approved with standard warranty .

Supplying of CO2 type fire extinguishers 4.5 kg capacity. Complete with discharge arrangement, high-pressure hose pipe, leak detection tested and ISI approved with standard warranty .

SITC of Automatic Modular Fire Extinguishers

NOTE:- 1) The measurable quantities may vary at the time of execution of work at site and shall be allowed as per actuals within the estimated cost.

Dogra and Dogra Enterprises