SPECIAL REPAIR TO BLDG NO T-3988 AND OTHER SANCTIONED WORKS UNDER AGE BR II AT CHANDIMANDIR

Amount

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance exceeding 500m but not exceeding 1500m all as specified & directed by Engineer-in-charge.

Dismantling stone slab & tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified & directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

Dismantling boarding , any description , fixed in any position with nails, all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed by Engineer-in-charge.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.

Surface excavation to required camber and gradient not exceeding 30 cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified.

Excavation over areas not exceeding 1.5m deep and getting out any type of soil soil complete all as specified & directed by Engineer-in-Charge.

Excavation over areas exceeding 1.5m deep but not exceeding 3m deep and getting out any type of soil soil complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil all as specified & directed by Engineer-in-Charge.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc.25cm thick each layer of soil all as specified.

Material and labour for sand filling under floor or in foundation including watering and consolidation complete all as specified and directed.

Removal excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-Charge.

Material and labour hardcore of broken stone or boulders of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 50mm average thick, as in padding over roof, mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)

Material and labour for plain cement concrete 1:3:6, nominal mix, type C-2 ,using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour for plain cement concrete 1:4:8, nominal mix, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete, all as specified & directed.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge. - (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately.

Material and labour for RCC (M-25 design mix, using crushed stone aggregate) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under-reamed piles and mass concrete and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour for reinforced cement concrete (M-25 design mix, using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, balconies, roofs, canopies shelves and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour for reinforced cement concrete (M-25 design mix, using crushed stone aggregate) as in beams, lintels over 1.5 metre span and the like complete all as specified and directed (reinforcement shall be measured and paid for separately).

Material and labour for reinforced cement concrete (M-25 design mix, using crushed stone aggregate) as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately).

Supply only Integral waterproofing compound, all as specified.

Cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish not exc. 50m complete all as specified & directed by Engineer-in-charge.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour for brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4 complete all as specified & directed.

Material and labour for Brick work with sub class ‘B’ bricks of class designation 7.5 (min. compressive strength 75Kg/sqcm) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed.

Material and labour for 40mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate mixed with WPC for Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified & directed by Engineer-in-charge. Note :- WPC will be measured and paid seperately as supply only).

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth complete all as specified & directed by Engineer-in-charge.

Cutting holes in to brick wall built in cement mortar for inserting hold fast etc the embedded portion exceeding one brick but n.exc two bricks and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 using 20mm stone aggregate complete all as specified and directed.

Supply and fixing solid PVC frame having profile 75mm x 50m , single rebate, made out of solid PVC foam with homogenous fine cellular structure having density 750, smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams and similar work, vertical or to batter to give rough finish to flat surfaces complete all as specified and directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs rough finished surface of concrete flat not exc 200mm thick complete all as specified and directed.

Material and labour for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for roughly finished flat surfaces of concrete, all as specified.

Material and labour for form work to sides of pillars, coloumns and similar items (square, rectangular or polygonal) including edges rough finished surface of concrete flat complete all as specified and directed.

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design ,solid PVC foam with homogenous fine cellular structure density 750 having smooth outer integral skin, supplying & fixing in frame at site complete all as specified and directed. Homog

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Supply and fixing for aluminium, anodized barrel tower bolts (ISI Marked) of extruded section and fixed, 200mm long, dia of bolt not less than 10 mm,complete all as specified.

Supply and fixing aluminum alloy, anodized, sliding door bolt (ISI Marked),250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.

Supply and fixing 75mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

Supply and fixing for 125 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

Supply and fixing for hat and coat hooks,brass, solid body, 175mm to 250 mm all as specified & directed by Engineer-in-Charge.

Supply and fixing for tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws complete all as specified & directed by Engineer-in-charge.

Supply and fixing for glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.

Supply and fixing for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed by Engineer-in-charge.

Supply and Fixing mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) complete all as specified and directed.

Supply and fixing mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal n.exc 5cm long, diameter of shank 11-15mm, complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.

Material and labour for mild steel TMT bars 6mm to 8mm dia , cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified.

Material and labour rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to grade Fe-290 Gde E-165, all as specified.

Supply and fixing rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410W (Gde -E-250 quality B) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed by Engineer-in-charge.

Supply and fixing for Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t complete all as specified & directed by Engineer-in-charge.

Supply and fixing steel ventilator factory made with top hung shutter including hinges, steel peg stay, a shop coat of red oxide zinc chrome primer, complete all as specified and directed.

Supply and fixing factory made aluminum frame for door openings windows, partition wall, shutters etc including styles & rails with standard anodized aluminum section, with one or more rebates including aluminium snap beading (wall thickness of aluminum section not less than 2mm), complete all as specified and directed (Glazing and aluminum hardware shall be measured and paid separately)

Supply and fixing Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as required and directed by Engineer-in-Charge.

Supply and fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engineer-in-charge.

Material and labour for mild steel round bars 10mm dia, for horizontal tie bars for fencing post etc including necessary welding with 50mm overlapping complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete as specified & directed by Engineer-in-charge.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item 59 here-in-before. (ii) Unit weight (weight per sqm) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing(length and girth as fixed), fixed with self tapping screws complete all as specified & directed by Engineer-in-charge.

Supply and fixing false ceiling powder coated exposed GI grid suspension system of panel size 600mm x 600mm, made out of GI tee of size 24mm x 30mm x 0.5mm and cross Tee of size 24mm x 24mm x 0.5mm and angle size 19mm x 19mm x 0.5mm including 4mm GI wire for suspending, bolts, necessary washers, nut ,cleats, pin hook etc for securing frame work to ceiling , trusses, purlins etc with and including supplying and fixing 4mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size 595mm x 595mm complete all as specified and directed.

-Ditto all as per above item No 63 but except non asbestos fibre cement designer ceiling board of size 595mm x 595mm complete all as specified and directed.

Material and labour for coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6 all as specified and directed by Engineer-in-charge.

Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-charge.

Material and labour 16-18mm thick baroda green marble stone slabs, (minimum size 90cm x 60cm), width and length as ordered, best quality machine cut and granite polished to be fixed on flooring etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab over and including screed bed 15mm thick in cement mortar 1:6 complete including rubbing and granite polishing, complete all as specified and directed.

Material and labour for coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent in Appx 'C') as in vertical surfaces, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 10mm thick in cement mortar 1:4 all as specified and directed by Engineer-in-charge.

Material and labour for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed.

Material and labour for 25mm thick cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) mixed with water proofing compound as in sub base finishing even and fair to receive to top layer complete all as specified & directed.(Note : Water proofing compound to be measured and paid separately)

Material and labour for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded crushed stone aggregate) as in sub base finishing even and fair to receive to top layer complete all as specified & directed.

Material and labour for glazed ceramic coloured tiles of size 350mmx250mmx7mm or 350mmx450mmx7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) all as specified and directed by Engineer-in-charge.

Material and labour for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, superior quality as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.

Supply and fixing 60mm thick factory made machine coloured pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006 of, M-35 grade, joints filled with sand complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Material and labour for 15mm thick rendering cement plaster in cement and sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for 15mm thick rendering cement plaster in cement and sand mortar 1:4 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on fair faces of brick wall or on concrete surfaces and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Material and labour for 10mm thick rendering plaster in Cement and Sand mortar 1:4 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. at the places out side the premises complete all as specified and directed.

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour for three coats of white wash on plastered or unplastered wall surfaces including preparation of new surfaces complete all as specified and directed

Material and labour for one coat of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed

Material and labour for preparation of old decorated plastered surfaces of walls including cornices , pilaster etc) and applying two coats of distempering oil emulsion complete all as specified & directed by Engineer-in-charge.

Supply and fixing 5.5mm thick tinted sheet glass fixed to aluminum frame work with standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Sqm in each pane, complete all as specified & directed. Note : anodized aluminum bead, rubber packing, aluminum screws etc, not included in this item and shall be paid under respective items.

Supply and fixing for 3mm thick, sheet glass ordinary quality and glazing with oil putty or beading in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of old painted steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Material and labour for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Material and labour for two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on primer on surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed.

Supply and fixing central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fixing for mild steel galvanised iron water tubing 15mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply and fixing for mild steel galvanised iron water tubing 20mm bore with screwed & socket joints, medium grade, with and including all fittings, such as sockets, Bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed.

Supply and fixing for 500 litres capacity rotational moulded polythene water storage tanks ,white coloured, double layered (Cylinderically vertical with closed top) hoisted and fixed in postion including fixing arrangement for inlet, outlet, over flow and vent pipe of standard size complete all as specified and directed.

Supply and fixing for bib taps, 15mm bore,fancy type with wall flange, chromium plated, CP ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

Supply and fixing , stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) for 20mm bore pipe, complete all as specified and directed.

Supply and fixing Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms), 32mm bore for pipe, complete all as specified and directed.

Supply and fixing urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, fixed complete all as specified and directed.

Supply and fixing for PVC connections 600mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

Supply and fixing for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

Supply and fixing 75mm bore PVC (SWR) bend any radius, complete all as specified and directed

Supply and fixing 110mm bore PVC (SWR) bends any radius, complete all as specified and directed

Supply and fixing 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

Supply and fixing for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

Supply and fixing for 125mm /110mm dia PVC (SWR) gully trap, setting & jointing with solvent cement complete all as specified & directed by Engineer-in-charge.

Material and labour for plain cement concrete 1:4:8 type D-2 nominal mix using 40mm graded aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for internal dia of pipe 100 mm (thickness of bed shall be 15 cms), all as specified. Note(i) :- The unit rate include for use of form work. (ii) Width of bed shall be outer dia of drain pipe plus 30 cms . Haunching shall be as per MES SSR-part-I/Part-II

Supply and fixing for 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified & directed by Engineer-in-charge.

Supply and fixing for vitreous china wash basin white, flat back of size 550 x 400 mm white including waste fittings, brass chromium plated coupling, brackets including cutting for and pinning in ends of brackets errect stand, fixing waste pipe complete all as specified & directed by Engineer-in-charge.

Material and labour for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, crystal white, with Cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of PCC (1:2:4), type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe, etc , all as specified. Make: Cat Part No. 2071 of 'Cera' or equivalent makes mentioned in Appx 'C'

Supply and fixing vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as directed by Engineer-in-charge.

Supply and fixing for soap dish, vitreous China white, embedded in the wall, approximate size 160x 160x90mm all as specified & directed by Engineer-in-charge.

Supply and fixing vitreous china urinal partition of size 310mm x 710mm terminating about 40cm above floor line complete all as specified and directed.

Material and labour for 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil boubd bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc having 75mm side lap joint and 100m end lap joint after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed.

Material and labour for vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and CP jet including PVC connection, fixed complete including demolition of old unservicable WC and provision of PCC 1:2:4, type B-I all as specified

Taking down carefully aluminum/copper point wiring on & including hard wood battens, surface conduit and board/blocks etc or through conduits for light , socket or power point ,fan point complete incl fitting such as switches ,sockets, ceiling rose , holder socket, light fitting, regulators and making good disturbed surfaces of wall, floor , ceiling etc and removing materials (other than those for which credit has been given by the contractor) to the MES stores yard for keeping in safe custody complete

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator in and including rigid non metallic PVC heavy duty CONCEALED CONDUIT complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 121 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed

All as per serial item 121 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly including new cast iron sunken boxes duly painted with two coat of anticorrosive paint over a coat of red oxide primer on surface in touch with wall and synthetic enamel paint over a coat of red oxide on other side covered with 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6/16 Amp, independent board,in and including rigid non metallic PVC heavy duty concealed conduit all as specified, all as directed complete as directed Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

All as per serial item 125 herein before but for socket outlet 3 pin 6 Amps on same board complete all as specified and directed

All as per serial item 125 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

Material and labour for point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade, two run of single core cable for phase &neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 2.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in existing conduit terminated on existing sunken box and provision of 3mm thick plastic laminated sheet, comprising of One socket outlet three pin ,6/16 Amp, independent board , complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces to match the original and nothing extra shall be paid on this account.

Supply and fixing for Bell, Ding Dong , single pole, AC 230 volts complete all as specified and as directed.

Supply & Fixing for bell push flush type 6 Amps, ISI marked ,single pole, 230 volts complete all as specified and directed by Engineer-in-charge.

Supply and fixing for Lamp holder,insulated body with metal ring including supply and fixing LED Lamp 7 watts, 240 volts complete all as specified and directed.

Supply and fixing for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

Supply & Fixing for switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for switch piano, flush type, 15 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1 pin, 5 and 15 Amps flush type ISI marked all as specified and directed by Engineer-in-charge

Supply & Fixing for sockets outlet multipurpose 2 in 1, 5 Amps flush type all as specified and directed by Engineer-in-charge

Supply & Fixing for ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Supply & Fixing for stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd , rotary type 100watts deluxe complete all as specified and directed by Engineer-in-charge.

Supply and fixing for 9W LED BULB B22 WHITE all as specified and directed. (Make :- C&S Cat part No:-LTHPLEDLAMP9WB22 white or equivalent makes mentioned in Appx 'C')

Supply & Fixing for LED luminaire ,36w , suitable for recess mounting LED ultra slim ceiling light with extruded aluminium housing with milky diffuser recess mounting ultra slim led 2'x2' panel and including with 36 watts strip recess mounted complete with drivers and other acessories as per manufacturer's recommendations and connections from ceiling rose complete , all as specified and directed. Make C&S Cat N LTCRSLM36WATT2X2 or equivalent makes mentioned in Appx 'C'.

Supply and fixing exhaust fan 300mm sweep, 240 volt, 50 Hz, with louvers heavy duty, 900 RPM, single phase including making connection with suitable size twin core cable complete all as specified and directed. MAKE : Havell's Cat Part No Ventilair DB FHVVEMTDBB12 and equivalent in BAJAJ/Crompton/Khaitan

Supply and fixing indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4 feet (appx) size, high efficiency electronic driver, system wattage not more than 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CR1 more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S Cat No LTDC01220WLED/WD or equivalent makes mentioned in Appx 'C' Notes:-l. The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report of LED chip used. 2. The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. 3. The product not complying with contract specifications will be rejected and contractor or the manufacturer will have no claim on account of rejection of his material /product on this account. 4. The contractor shall submit warranty certificate from manufacturer for minimum 1 year.

Supply and fixing indoor decorative extruded aluminium anodized housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED batten type luminaries' (LED batten shall be prewired box type, retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2 feet (appx) size, high efficiency electronic driver, system wattage not more than 10 watt (lumen output not less than 1000 lumen), power factor more than 0.9, with surge protection device minimum 2KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glare free, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sq mm". Make C&S Cat No LTTB2F10WLED/W or equivalent makes mentioned in Appx 'C' Notes:-l. The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report of LED chip used. 2. The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. 3. The product not complying with contract specifications will be rejected and contractor or the manufacturer will have no claim on account of rejection of his material /product on this account. 4. The contractor shall submit warranty certificate from manufacturer for minimum 1 year.

Supply and fixing for decorative wall light fitting high grade poly carbonate housing suitable for and including 15 watt LED retofit lamp, PC diffuser in opal finish glass filled engineering plastic B22 lamp holder with electrical grade copper contact wired upto terminal block, mounting bracket with lugs and screws complete all as specified and direcated.Make:- Havells produt No. CITY-1 LHDL 02160099 or or equivalent make as specified in Appx 'C'

Supply and fixing for bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity. (Make :- C&S Cat part No:-CG80IB6WLED or equivalent makes mentioned in Appx 'C')

Taking down existing Ceiling fan or exhaust fan carefully , kept safely and refixing the same after repair, complete all as specified and directed. Note :- Necessary T&P such as ladder, helper etc shall be arranged by the contractor.(Repairs & spares shall be measured and paid separately under respective item of sch 'A')

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and remving from site, all as specified and directed by Engr-in charge.

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified & directed by Engineer-in-charge.

Supply and fixing sub main wiring with three single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10Sqmm (nominal area), 1100 Volt grade (with approved colour coding as per IS) with and including continuous earth wire of size 10Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 32mm size(minimum size), including cutting chases in walls for PVC concealed conduit and making good, complete all as specified and directed. Note : (i) For the purpose of measurement, 3 single core of 10 sqmm and one single core of 10 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 06Sqmm (nominal area), 1100 Volt grade (with approved colour coding as per IS) with and including continuous earth wire of size 06 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), including cutting chases in walls for PVC concealed conduit and making good, complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 06 sqmm and one single core of 06 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 04 Sqmm (nominal area), 1100 Volt grade (with approved colour coding as per IS) with and including continuous earth wire of size 04 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 25mm size(minimum size), including cutting chases in walls for PVC concealed conduit and making good, complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 04 sqmm and one single core of 04 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with three single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 16Sqmm (nominal area), 1100 Volt grade (with approved colour coding as per IS) with and including continuous earth wire of size 16Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 32mm size(minimum size), including cutting chases in walls for PVC concealed conduit and making good, complete all as specified and directed.Note : (i) For the purpose of measurement, 3 single core of 16 sqmm and one single core of 16 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 10 Sqmm (nominal area), 1100 Volt grade (with approved colour coding as per IS) with and including continuous earth wire of size 10 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through and including PVC concealed conduit 32mm size(minimum size), including cutting chases in walls for PVC concealed conduit and making good, complete all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 10 sqmm and one single core of 10 sqmm cable along with PVC conduit shall be considered as 1 running metre.

Supply and fixing 25mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS 14930 Part-II with anti rodent and non flame propogating properties of approved colour with fittings for cable protection from approval make complete , all as specified and directed Make : Finolex / Duraline /Rex

Supply & Fixing for sheet metal enclosure DB's 415 Volts, IP-43, suitable for mounting MCCB's, TPN, 4 way vertical double door flush mounted with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- ABB Cat Part No. NSYN8690VMXT104 or equivalent make as specifed in Appx 'C'

Supply and fixing for MCCB TPN 415 Volts 50 Hz 63 Amps rating with rupturing capacity not less than 18 kA, Ics = 100% of Icu, fixed thermal & adjustable megnetic settings with spreader links, copper reducer etc complete all as specified and directed by Engineer-in- Charge. (Make:- Cat Part No 1SDA066805RI of ABB's or equivalent makes mentioned in Appx 'C' as approved by GE).

Supply & Fixing for MCB ,SPN , 240 volt, 40Amps 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat NoDHMGCSNF040 or equivalent makes mentioned in Appx 'C'.

Supply & Fixing for MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :-Havells Cat No DHMGCSPF006-032. or equivalent makes mentioned in Appx 'C'.

Supply and fixing MCB SPN 240 volt 63Amps 10 KA, 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engineer-in-charge. Make :- Havells Cat No. DHMGCSNF063 or equivalent makes mentioned in Appx 'C'.

Supply & Fixing for sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way double door with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- Havells Cat Part No. DHDNSHODAW08 or equivalent makes mentioned in Appx 'C').

Supply & Fixing for sheet metal enclosure DB's 415 Volts, IP-43, suitable for mounting MCCB's, TPN, 6 way vertical double door flush mounted with 200 Amps rated copper bus bar and blank plate as required complete all as directed by Engineer-in-charge.(Make :- ABB Cat Part No. NSYN8690VMXT106 or equivalent make as specifed in Appx 'C'

Supply and fixing sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with 2 pin and earth plug and socket complete with one single pole MCB 240 volts, 20 Amps, 10 KA, 'C' Curve complete all as directed by Engineer-in-charge. (Make :-Havells Cat No. DHDPUSN020 for encloser and DHMCCSPF006-032 or equivalent makes mentioned in Appx 'C' as approved by GE).

Supply, laying & fixing along the poles/walls or passing through pipes or laid in trenches under floor or through walls etc jointing and testing LT Cross Linked Polythene Insulated (XLPE insulated) galvanized steel strip armoured electric cable, 1100 volt grade heavy duty with aluminium conductor overall served with an outer sheath of PVC complete of size 10 Sqmm 2 Core all as specified & directed by Engineer-in-charge. (Note:- Excavation, earthwork, Sand Cushioning, Cable covers, Pipe for cable protection to be measured and paid for separately).

Supply and fixing for MCCB TPN 415 Volts 50 Hz 100 Amps rating with rupturing capacity not less than 18 kA, Ics = 100% of Icu, fixed thermal & adjustable megnetic settings with spreader links, copper reducer etc complete all as specified and directed by Engineer-in- Charge. (Make:- Cat Part No 1SDA066806RI of ABB's or equivalent makes mentioned in Appx 'C' as approved by GE).

Supply and fixing for MCCB TPN 415 Volts 50 Hz 125 Amps rating with rupturing capacity not less than 18 kA, Ics = 100% of Icu, fixed thermal & adjustable megnetic settings with spreader links, copper reducer etc complete all as specified and directed by Engineer-in- Charge. (Make:- Cat Part No 1SDA066807RI of ABB's or equivalent makes mentioned in Appx 'C' as approved by GE).

Material & labour for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including Gl protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on pole or control board or main switch and Gl pipe medium grade 20mm bore for watering funnel with wire mesh CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicated including testing on completion all specified and directed. Note : The unit rate including for protection pipe and Gl earth wire 4.00 mm dia from top to earth plate up to 7.5 meter

Dhingra Brothers

N.N.CONSTRUCTION

dhiraaj construction company

M/S Hari Om Construction

PANWAR CONSTRUCTIONS

Anil jindal and sons