TENDER FOR FIXING OF CHAIRS FOR VIP ENCLOSURE AND GENERAL SEATING AT JLN STADIUM, NEW DELHI

Amount

For Chairs and furnitures

Supplying and fixing of VIP enclosure Stadium Chairs made of Steel Structure, HDPE (High Density Poly-Ethylene) blow moulded seat and back. Seat and back with high density injection moulded plastic shell, high impact, co polymer polypropylene fully compounded ultra-violet light inhibitors to retard fading and antistatic Integral seat and back pads using high density moulded foam and polypropylene inner are upholstered with high quality vinyl. Centre to centre: Minimum 450 mm backrest height:820 mm with minimum & maximum wall section thickness is in range of 2mm-8mm, UV protection of3000 Sunshine hour, Riser mounted, Powder coating: to be by hoist and crane system followed by degreasing / de- rusting / Activation followed by 7 Tank powder coating process. For installation, chairs shall be bolted to the ground using chemical anchor fasteners of Hilti or any other similar brand duly concealed to avoid body contact. The ergonomically designed seats shall be two-piece tip-up sports venue chair in polypropylene as per specification. The tip-up mechanism is spring activated and silent in operation. The spring mechanism is sealed by a high viscosity silicone grease and incorporate a damping element to provide a soft and controlled lift to the seat. The seat and back are in smooth glass filled co- polymer polypropylene for easy maintenance. All metal parts exposed shall be stripped and cleaned with iron phosphate, hot water rinsed and then chromic acid rinsed. All metal parts are hot dipped galvanized for outdoor use Conformity with BS-6496 hardness test. All the above items shall be as per approved sample and specifications & direction of engineer/ architect-in-charge. Note: This item includes removal of the existing chairs with all the neccessary fitting/assembly ie. Base Plate, fasteners, nut and bolts, any kind of metal frames complete in all respect and stacking all the removed items at a designated location/area within JLN Campus as per the direction of Engineer-In-Charge. These Existing chairs will remains the property of SAI. Nothing Extra shall be paid in this regards.

Supplying and fixing single-piece double shell with backrest type, round curved shape to hold the body. The high-density polyethylene blow moulded with impact durability. This hollow seat make soft & comfort feeling directly Fixed to riser over a base frame. The seat shall be , HDPE (High Density Poly-Ethylene) blow moulded seat and back high impact, co polymer polypropylene fully compounded ultra-violet light inhibitors to retard fading. Chairs are bolted to the ground using chemical fasteners of Hilti or any other similar brand. Seat dimension shall be 415mm X 450 mm with minimum 3 mm and maximum 8 mm wall thickness. Seat shell shall be blow moulded high polyethylene with UV protection dual wall with air gap for comfort and softness while seating on seat with moulded insert nut to mount on the floor. The manufacturing company shall be ISO-9001:2015, ISO-14001:2015,ISO-50001:2011,OHSAS- 18001:2007 Certified. All the above items shall be as per approved sample and specifications & direction of engineer/ architect-in-charge. Note: This item includes removal of the existing chairs with all the neccessary fitting/assembly ie. Base Plate, fasteners, nut and bolts, any kind of metal frames complete in all respect and stacking all the removed items at a designated location/area within JLN Campus as per the direction of Engineer-In-Charge. These Existing chairs will remains the property of SAI. Nothing Extra shall be paid in this regards.

Providng and laying in postion cement and concrete of specified grade exculding the cost of centering and suttering. I:4:8 (lcement: 4 coarse sand derived fronm natural sources 8: grade stone aggregate 4Omm nominal size derived lrom natural sources

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Extra for pre finished nosing to treads of steps of marble / Granite stone.