Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC SHOP NO 4 SUN STAR CHS LTD PLOT NO 309 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.5 L+₹51,842 (2.16%)Rejected-AOC | L2 | Rejected-AOC Not accepted | |
| 3 | L3₹25.4 L+₹1.4 L (6.03%)Rejected-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L3 | Rejected-AOC Not accepted | |
| 4 | L4₹26.2 L+₹2.2 L (9.24%)Rejected-AOC T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-AOC Not accepted |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
17 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NORTH MUMBAI
GARRISON ENGINEER NORTH MUMBAI
COMPREHENSIVE REPAIRS TO BR WORKS TO CERTAIN BLDNGS AT HBTC MARVE AND REPAIRS TO ROOF ALLIED WORKS AT COD AFMSD UNDER GE NORTH MUMBAI
2022_MES_525248_1
8969/E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH MUMBAI
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
Yes
GARRISON ENGINEER NORTH MUMBAI
₹60,000
Yes
19 Jul 2022
20 May 2022
20 Jun 2022
20 May 2022
17 Jun 2022
3 Jun 2022
22 May 2022 - 2 Jun 2022
60 days
Amount
Chipping, removing, carefully concrete including loose palster by low impact Hammer without damaging the structure and cleaning and disposal of debris out side the premises including necessary form work ie providing & erecting steel props, safety nets, dust control net, Self supported two legged B class tubular steel scaffolding , 4mm thick ply covering to machineries / other utilities etc complete all as specified and directed.
Cleaning the existing reinforcement with wire / rotary wire brush, making the surfaces free from loose material dirt etc, complete. Applying two coats of alkaline rust converting primer conforming to ASTM-B- 117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coats etc complete all as specified and directed.
Providing and fixing additional steel bar in various structural elements like column, beams and slab etc including drilling, bending and fixing the bars tying with preleft binding wires etc complete anchoring reinforcement bar in existing RCC member in holes of minimum 10d depth for 8 to 12mm dia bars complete all as specified and directed.
M&L for carrying out application of 'Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of propertyh which permits the material to migrate to a virtual extent of 100mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attach anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete etc complete all as specified and directed.
M&L for applying Anticorrosive Treatment to Reinforcement by IPNET RB. Application of two coats of IPNET RB on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be by brush complete all as specified and directed.
Providing and applying structural grade epoxy-latex bond coat pririor to application of any type of mortar conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application complete all as specified.
Providing, casting & repairing of excessively damaged members with Micro-concrete at all levels with all leads & lift or as directed including formwotk, centering, scaffolding & mixing, laying, levelling and finishing including curing etc complete ( for thickness more than 40mm) all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.
Material and Labour non skid coloured ceramic tiles 7 to 8mm thick joint free (square / rectangular) area of each tile exceeding 0.18 sqm but not excceeding 0. 38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 etc complete all as specified and directed.
M&L glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement incl 15 mm thick screed bed in CM 1:4 etc complete all as specified and directed.
All as per Srl item No 11 but on skirting/dado incl 10mm thick rendering of backing layer in CM 1:4 complete all as specified and directed.
Taking down chowkats without taking off shutters from the frame area n. exc 1.50 Sqm each complete all as specified and directed.
Taking down chowkats without taking off shutters from the frame exc.1.50 Sqm and not exc. 4.00 Sqm etc complete all as specified and directed.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners.A minimum of 6Nos screws to be provided for each frame all as specified and as directed by Engineer-in-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engr-in-Charge. Make: M/S Rajshri Plastiwood, Indore/M/S Sintex Industries Ltd/M/S TUFFFLON/M/S Dura Plast Extrusion
Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.
Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side all as specified and as directed. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix factory made plain framed panelled shutter 35mm thick 2nd class hardwood rail and style (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
Material and labour for preparing new wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
Material and labour for preparing old wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-Charge.
S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) including chequered tiles and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as directed by Engineer-in-Charge.
Material and labour for 100mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.
S&F chequered cement concrete tiles 20 Cm x 20 Cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match in floor with and including cement screed bed 20mm thick in cement mortar 1:6 complete all as complete all as specified and as directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar and removal of debris out of MD land complete all as specified and directed by Engr-in-Charge.
M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement morter 1:6 complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls including ceilings etc., including racking out joints, hacking for key scrubbing down with water etc and removing debris outside MD land complete all as directed by Engineer-in-Charge.
M&L for 10mm thick rendering with cement mortar 1:4 on internal wall surfaces including dubbing out plaster in CM 1:6 of any thickness finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 15mm thick in CM 1:4 on brick or concrete surface, including dubbing out plaster in CM 1:6 of any thickness finishing even and smooth without using extra cement but using water proofing compound complete all as specified and directed. Note: Water Proofing Compound shall be measured saperatly.
M&L for 5mm thick rendering with cement mortar 1:3 on internal ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply only integral water proofing compound.
M&L for preparation of new plastered surfaces of wall and applying two coats of Distemper oil emulsion over a coat of priming plastered and other surfaces with alkali resistant priming paint over 1.50mm thick layer of wall care putty on wall complete all as specified and directed.
M&L two coats of Cement base paint over a coat of cement primer including preparation of new plastered wall surfaces. etc complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of ceilings and applying three coat of white wash complete all as specified and directed by Engineer in Charge.
M&L for removing vegetation, trees, plants and shrubs etc in any position by cutting hole in to brick wall/concrete surface (for removing the roots of trees/plants) area n. exc 0.50 sqm each and using acid to burn the all roots of tree/plants and making good disturbed surface with cement concrete (1:2:4) type B1 using 20mm graded aggregate mixed with water proofing compound by 3% of weight of cement and including making good adjoining surface including existing finishes complete all as specified and as directed by Engr-in-Charge.
Demolition of reinforcement cement concrete of any descriptionand in any position not otherwise specifically provided for woll (reinforcement cut as required to facilitate demolition including removing debis out side MD land complete all as specified and directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges all as specified and as directed
Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.
S & F pre-painted galvalum aluminium zinc coated GI based colour corrugated steel sheet 0.5mm thick of an colour having tensile self tapping screws as per manufacturers instruction/recommendations complete all as specified and directed by Engr-in-Charge.
S & F pre-painted galvalum aluminium zinc coated GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 mpa as in wall cladding and roof fixed with self tapping screws as per manufacturers instruction/recommendations complete all as specified and directed by Engr-in-Charge.
M&L preparing new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
M &L for preparation of old painted surfaces of steel of any description and in any position over 10 CM width or girth ,not otherwise described, and applying one coat of synthetic enamel paint complete including necessary scaffolding arrangement as required at site all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
M&L for anodised aluminium snap grid frame work for false ceiling confirming to designation 3600 in IS-207-10985 including all ceiling cleats 4 mm dia GI wire suspender with necessary main tee 35.00x23.50x1.50mm , cross tee and wall angle of size 23.50x23.50x1.5 mm with 605x605 mm grid system complete all as specified and directed by Engr-in-Charge.
M&L PVC false ceiling of 10mm thick pvc insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/ GI /MS as per specification & drawing complete all as specified and directed by Engr-in-Charge.
Supply and fix in repair PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, complete all as specified and as directed by Engineer-in-Charge. Make : Slimline/Commander/Hindustan.
Supply and fix in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, long body with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed. Make : Jaquar (Essco)/Prayag / Seiko
Material and labour for plain cement concrete 1:5:10, type E-2, Using 40 mm graded stone aggregate, as in lean concrete complete all as specified and as directed.
Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
Supply and fix in repairs PVC nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1: 2: 4 type B1, Complete all as specified and as directed by Engineer-in-Charge
M&L for preparation of new plastered surfaces and applying two coats of weather proof acrylic paint plain pattern over a coat of weather coat primer over thin layer of wall care putty complete all as specified and directed.
Material and labour for providing plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course of roof, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately
Material and labour for roof treatment with APP modified membrane to roof surfaces of the following specification:- (a) Preparation of roof surfaces and applying oil bound bitumen primer @ 0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit of 250 C. (b) Supply and lay APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sqm. (c) Provide 20mm thick screed in cement mortar (1:4) mixed with approved water proofing compound over a layer of non woven geotextile layer. (d) Providing 300 x 300 x 20mm thick machine pressed cement concrete tiles with minimum thickness of joint (not exceeding 3mm) and are thoroughly filled with water proof polymer based joint mortar etc complete all as specified and directed. Note: The tiles shall be laid to the slop to avoid stagnation of water Make: STP Ltd / Texsa India Ltd / IWL Ltd / Tiki Tech
Material and labour for roof treatment with APP modified membrane to roof and parapet wall surfaces of the following specification:- (a) Applying oil bound bitumen primer @ 0.40 lit / Sqm of density 0.87 - 0.89 Kg/lit and viscosity 70-160 CPS, of 25 0 C after preparation of surface. (b) Supply and lay APP water proofing membrane reinforced with non woven polyester matt laid using butane torch by torch on application with a side lap of 10cm and 15cm end lap weighing not less than 3.6 kg/sqm. (c) Applying one coat of reflective bituminous aluminium paint @ 0.15 Kg/sqm or as per manufacturer's instruction over APP membrane complete all as directed by Engineer in Charge. Make: STP Ltd / Texsa India Ltd / IWL Ltd / Tiki Tech
S&F Wind ties for roof including securing bolts all necessary drilling, bolting or riveting etc, and similar work conforming to Fe 290 Gde E-165 complete all as directed.
M & L Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in lieu of screws as per manufacturers instruction/recommendations complete all as specified and directed by Engr-in-Charge.
S&F for 1mm thick plain Galvanised mild steel sheeting in ridges ,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 with welding or soldered joints complete all as specified and as directed by Engr-in-charge.
M&L 6 mm thick asbostos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L type or J type or cranked hook bolts.
Ditto all as described in Ser item No 69 here in before but except sheet.Note :- Old material retrieved from here in before Item, shall be reused.
M&L Asbestos cement two piece adjustable plain wing ridge 6mm thick complete all as specified and as directed by Engr-in-charge..
Dismantling of 110/150 mm dia cast iron/PVC pipes jointed in cement mortar and taking out if reqd. complete all as specified and as directed by Engr-in-charge.
S&F UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 150mm dia, fixed to walls complete all as specified and as directed by Engr-In-Charge. .
S&F UPVC (SWR) bends any radius, 150mm dia complete all as specified and as directed by Engr-In-Charge.
CROSSLINE ENGINEERS AND CONTRACTORS
Vishal Builders
Shetty Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .