Construction of New Isolation Ward inside Port Trust Hospital

Amount

Empty bore of 300mm dia including supply of rig, tripod & other accessories which are required for boring & ascertained the soil strata up-to 10Mtr. Depth, in every 1.00Mtr. the status of soil should be collected & report submitted to the Office with supply & cost of all labour, water, materials,testing charges,safety arrangements for labours, T&P taxes excluding GST all complete as per the direction of Engineer-in-charge.

Providing 300mm dia single under reamed M-20 bored compaction pile of 9m length from cut off level including welding of cages, boring through all strata from existing ground level with removal of obstruction if any, using bentonite, including necessary MS cones as required fabricating the MS cone out of 2.5mm/3.15mm thick MS plate, irrecting & providing required reinforcement 6nos of longitudinal bar @ 12mm dia & 46 nos of ring @ 8mm dia properly welded to the main bars and disposing the bored earth out from the work site, with supply & cost of all labour, water, materials, taxes, tollage, royalties, safety arrangements for labours, T&P etc complete exlcuding GST and as per direction of Engineer in charge. NB: (a) Excluding cost of steel & labour for bending binding. (b) Payment shall be made from cut off level.(c) Any excess or less length beyond the specification length in this item the rate shall be paid proportionately to the rate quoted for this particular item.

Conducting Initial load test as per IS-2911(Part-IV) for testing of pile including Kantiledge of required load & supply of all testing equipments including cost & construction of required length of pile as specifiec in Sl. No. 02 & test pile cap & dismentaling the kantiledge after completion of the test & submitted the test report as per IS-2911(Part-IV) with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge . NB: Applied load is 2.50 times of the design load, i.e 25.00 Tons.

Routine load test for the working piles including kantiledge of required load as per IS-2911(Part-IV) for testing of pile & supply of all testing equipments including cost & constructing of test pile cap & dismentaling the same after completion of the test as specifiec in Sl. No. 02 & test pile cap & dismentaling the same after completion of the test & submitted the test report as per IS-2911(Part-IV) with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge . NB: Applied load is 1.50 times of the design load, i.e 25.00 Tons.

Cutting pile head up to cut off level including disposing of the dismantled material out of work site with supply of all materials, labour, T&P, royalties,tollages, hire & running charges of all machineries, transportation charges, all taxes excluding GST etc all complete as directed by the Engineer-in-charge.

Earth work excavation in all kinds of soil from the existing ground level in foundation trenches & levelling, ramming as per requirement etc with all leads and lift disposing and spreading the excavated material within a lead of 5 km at locations as directed with supply of all barricading to the work site with cost & supply of all materials, labour, PPE of labours, T&P, royalties, tollages, hire & running charges of all machineries, transportation charges, all taxes excluding GST etc all complete as directed by the Engineer-in-charge.

Back filling with ⅔ qty. of excavated soil in foundation trenches & levelling, ramming, cosolidating/compacting as per requirement etc. & lifting of excavated material within a lead within 5 km with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, compacting, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, mixing, transporting, laying in proper level & grade Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 hard granite graded chips of 40mm & below size Crusher Broken) for PCC including hoisting, laying over compacted surface, finished smooth to the exposed surface, to proper level & gradient, barricading the work site ,curing etc. with cost & supply of all materials, water, labour, PPE of labours, T&P, royalties, tollages, testing charges, hire & running charges of all machineries, transportation charges, all taxes excluding GST etc all complete as directed by the Engineer-in-charge.

Filling of sand to the required level including transportation within a lead of 5 Km. (avg.) by private trucks with covering at the top to prevent spillage/blowing of sand including loading at one end and unloading at other end (work site), spreading in layers, leveling, cosolidating/compacting in suitable layers with cost & supply of all materials, labour, T&P, operation expenses, all POL, cost of water, to proper level & gradient, barricading the work site, PPE of labours, T&P, royalties, tollages, hire & running charges of all machineries, transportation charges,testing fees, all taxes excluding GST etc all complete as directed by the Engineer-in-charge. N.B:- 10% voids shall be deducted from the measured quantity of sand after compaction to arrive at the payable quantity.

M20 grade mix design concrete using black hard granite chips (crusher broken) of approved quality for construction of RCC pile cap, tie beam, column, roof beam, lintel, chajja & roof slab etc including mixing in mini batching plant, hoisting, laying, consolidating with vibrator, curing, maintaining proper level & slope, finished smooth to the exposed surface etc. complete at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing,testing charges, water charges all transportation charges, all taxes excluding GST , excluding the cost of binding wire, cost of steel, labour charges for bending/binding of steel & cost of form work complete as directed by the Engineer in charge.

In Foundation & plinth

In Superstructure, GF

In Superstructure, FF

Supply of Fe-500 steel confirming to I.S. Specifications of SAIL/TATA/VIZAG/JINDAL PANTHER brands including cutting, straightening, bending, binding & placing the grills in position for RCC works including cost of binding wire of 18 to 20 gauge & febricating of steel at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, all transportation charges,testing charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge. N.B: Payment shall be made as per the co-efficient laid down in IS-1786. No wastages shall be paid.

Providing rigid, smooth, leak proof, centering & shuttering with formworks made out of new ply/ Steel shutters for walls, providing openings on walls, chipping & coaltaring after each use of shuttering materials, dismantling the same after stripping off period including supply of all materials, labour, T&P, tollage, royalties,taxes excluding GST, etc. all complete as directed by the Engineer in charge.

In Foundation & Plinth, CC(1:3:6)

In Superstructure, Column & Beam at GF

In Superstructure,Lintel at GF

In Superstructure, Chajja & Roof slab at GF

In Superstructure, Column & Beam at FF

In Superstructure, Lintel at FF

In Superstructure, Chajja & Roof slab at FF

Brick work in cement mortar (1:6) in F&P & superstructure using K.B. Bricks having crushing strength between 75 Kg/Cm² to 99Kg/Cm² at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, testing charges,water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

In Foundation & Plinth brick work up-to plinth beam

Brick work in Superstructure, GF

Brick work in Superstructure, FF

Cement plaster with following thickness & proportions over brick and concrete surface as reqiured and finished smooth to the exposed surface, rounding the corner at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges,testing charges, all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Inside plastering 12mm thick with CM(1:6), GF

Inside plastering, Ceiling of GF, 12mm thick with CM(1:4)

Inside plastering, FF, 12mm thick with CM(1:6)

Inside plastering, Ceiling of FF, 12mm thick with CM(1:4)

Outside plastering, 16mm thick with CM(1:6) @ GF

Outside plastering, 16mm thick with CM(1:6) @ FF

Outside plastering, 12mm thick with CM(1:4) @ GF

Outside plastering, 12mm thick with CM(1:4) @ FF

Providing 40mm thick AS flooring, CC(1:2:4) using CB chips with cement punning including finishing smooth to the exposed surface including, mixing , hoisting, laying, consolidating , curing, maintaining proper level & slope, etc complete at any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, testing charges,water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Neat Cement Punning any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting & fixing of WPC door and window frames of required size as per requirment with required staging, scaffolding, including all leads & lifts, transportation charges ,testing charges with supply of all labour, T&P, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying fitting and fixing of 32mm thick WPC door/ window shutters including cost of loading & un-loading charges, stacking at departmental stores with supply of all labour, materials like hinges, towe bolt, handle, aldrop etc. T&P, transportation, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting, fixing dressed seasoned salwood frames/ choukath for door /window /ventilator etc coaltaring two coats to wall side face of frame, fixing to position with required nos of W.I clamps of size 250mmx40mmx4mm size, grouting with C.C (1:3:6) including cutting grooves in walls & fixing to proper position & making good the damage including cutting grooves in choukaths and jointing with adhesive solution any height at any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting, fixing in wooden frames 32mm thick pannel shutters for doors with all aluminium fittings, wooden hinged cleats, sand blocks, cutting grooves in chaukath, mending good the damages any height at any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting, fixing of fully glazed aluminum framed (Powder Coated) sliding/fixed window, ventilator using 15 micron anodized OEL aluminium section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading, friction stay, handle and all fittings with 5.5mm. plain glass etc. all complete including cost and supply of all materials, labour, PPE of labour, T&P, all taxes, transportation charges, etc. as per direction of Engineer-in-charge. Excluding cost of GST.

Providing & supplying, fitting, fixing Hot Dip Galvanized Iron(HDGI) grill with flat & square bar of approved quality, size & design as per requirment at site including fabrication, making hole in brick pillar for fixing of gate with CC(1:2:4) to proper position including removing & refixing the gate any height at any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting, fixing abrasion resistant full body vitrified antimicrobial germ free tile (double /GVT) of size(1200mm. x2400mm) of approved quality, shade laying over a base course of CM(1:1) 20mm. thick and cement slurry including cutting to size, filling the joints with tile grouts of required shade laid to proper slope & level cleaning the top surface at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, curing, testing charges,water charges ,all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting, fixing of 18mm thick flame finish granite stone slab saw cut,mirror polished premoulded ,machine cut for walls & floors of required size approved shade colour Z-black & texture laid over base of 20mm thick with CM(1:4) and cement slurry including , jointing the joints with white cement and pigments laid to proper slope and level cleaning the top surface at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges,testing charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Painting two coats with weather coat to exterior wall surface with approved weather coat of approved colour & shade with one coat of acrylic based wall putty & one coat of primer by the use of brush/roller to give an even surface to the satisfaction at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Plastic emulsion paint two coats with approved quality, colour & shade with one coat of acrylic based wall putty & one coat of primer including filling the holes with required materials to give an even shade, washing and cleaning the wall including cost of brush any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Enamel painting two coats to wood/iron work of approved quality & shed over a coat of primer after scrapping, sand preparing & cleaning the surface & filling the joints & holes with putty(boiled or raw) where found necessary before paint at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting and fixing the following materials of IS make, approved quality including supply of screw/nails etc. at any height at any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Godrej Hydraulic door closer

150mm. Handle copper finish material base

300mm Handle copper finish material base

100mm. x 63mm. Aluminum hinges

Aluminum door stopper (4”)

Mortise lock copper finish material base

100 mm tower bolt copper finish material base

250 mm tower bolt copper finish material base

Providing fitting, fixing of 25mm thick chequered tile size(300mm x 300mm) of approved quality, , thickness over 20mm base course of C.M(1:3) and cement slurry including cutting to size filling the joints with white cement and colour pigment fixed to proper level etc. including all wastages at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying of all materials, labour, T&P including all taxes tollage, royalities & constructing of Manhole Chamber, earth work excavation in all kinds of soil backfilling the same after work done, with CC(1:3:6) using 40mm & down CB metal of approved qty. over the bed of 0.25M thick, KB Brick having crushing strength not less than 75Kg/Cm² to 99Kg/Cm², RCC cover slab with CC(1:2:4) using 20mm & down CB chips of approved qty. including bending, binding of Tor steel with bindig wire 18 to 20 gauge & centering/shuttering, Cement plastering(1:3) of 12mm thick to outside & inside & neat cement punning to the inside surface wall & flooring as per the approved specification & design . Size(1200 x1200 x 900)mm with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying of all materials, labour, T&P including all taxes tollage, royalities & constructing of Inspection Chamber, earth work excavation in all kinds of soil backfilling the same after work done, with CC(1:3:6) using 40mm & down CB metal of approved qty. over the bed of 0.25M thick, KB Brick having crushing strength not less than 75Kg/Cm² to 99Kg/Cm², RCC cover slab with CC(1:2:4) using 20mm & down CB chips of approved qty. including bending, binding of Tor steel with bindig wire 18 to 20 gauge & centering/shuttering, Cement plastering(1:3) of 12mm thick to outside & inside & neat cement punning to the inside surface wall & flooring as per the approved specification & design . Size(762 x 762 x 457)mm with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, curing, water charges all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Dewatering the deposited water form work site F&P area using diesel pump at any height & any levels with cost & supply of all materials, labour, fuel cost & operator cost, PPE of labours, T&P, tollage, royalties all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Supplying, fitting and fixing of following Un plasticized C-PVC pipes & fittings of Astral or equivalent ISI make conforming to schedule-80 standard of ASTMD-1785 and fittings of ASTMD-2467 for water supply & Sanitary works at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

20mm dia Pipe

25mm dia Pipe

15mm dia Pipe

40mm dia Pipe

50mm dia Pipe

15mm dia Socket

20mm dia Socket

25mm dia Socket

40mm dia Socket

50mm dia Socket

20mm x 15mm tee

25mm X 20mm tee

25mm X 15mm tee

40mm x 25mm tee

50mm dia Union

40 mm dia Union

25mm dia Union

20mm dia Union

15mm dia Union

15mm dia Elbow

20mm dia Elbow

25mm dia Elbow

40mm dia Elbow

50mm dia Elbow

15mm x 20mm Elbow

25mm x 20mm Elbow

40mm x 25mm Elbow

50mm x 40mm Elbow

15mm dia Tee

20mm dia Tee

25mm dia Tee

40mm dia Tee

50mm dia Tee

20mm x 15mm Tee

15mm, 20mm & 25mm dia plug

20mm x 15mm FTA

20mm x 15mm MTA

20mm FTA

20mm MTA

50mm dia GMFWV

40mm dia GMFWV

25mm dia GMFWV

20mm dia GMFWV

15mm dia GMFWV

Long flush bend

20mm dia CP concealed stopcock (H/D)

Porcelin Basin with pedestal

15mm dia CP angular stop cock (H/D)

100mm dia CP Grating

150mm dia CP Grating

15mm dia CP long body bibcock

15mm dia CP short body bibcock

15mm dia two way bib-cock

15mm dia with CP 600mm long flexible Connection pipe

32mm CP Waste full thread 80mm long

32mm PVC Waste Pipe for basin

32mm PVC Waste Pipe for urinal

white glazed earthenware Squatting Urinal 450mm x 350 mm autoflushing

Health faucet

Mirror (600mm x 450mm) - 5mm thick, with back board and brass mirror screws

Soap dish holder

CP Extension piece of all size

Mseal plumber

white cement

200mm PVC Pipe with all fittings

150mm PVC Pipe with all fittings

110mm PVC Pipe

75mm PVC Pipe

110mm PVC door bend

110mm PVC P-Trap

110mm Plain bend

110mm H/R bend

110mm dia offset

75mm PVC door bend

75mm/100mm PVC plain bend

75mm pvc plain bend

75mm dia S/J with door

75mm dia D/J with door

75mm dia Y Junction

110mm dia socket

110mm dia S/J with door

110mm dia D/J with door

110mm 45° bend

110mm dia Cowl

75mm dia Cowl

PVC clamp of all size with nail attached

Stain less sink( 24" x 18" x 8")

PVC paste (Each No. =100gm)

syntex tank of 2000 litres

sensor commode with sensor plate with manual ,conceal cistern

Automatic soap dispenser

square single towel rail 60 cm long

sensor pillar cock(faucet)

square towel ring

square 250mmx250mm brass auto sensor rain shower head,conceal thermostatic mixer with trim & easy dial for head shower

high speed hand dryer

0.90 ltr.water saving floor standing urinal & sensor flow conceal sensor urinal auto flushing

6 litre storage Geyser

Supplying all materials, labour, T&P for cutting holes through brick & Rcc work including good to the same cement mortar(1:4) & leak proof to the damaged portion for taking C-PVC pipes & fittings at any height & any levels with cost & supply of all materials, labour, PPE of labours, T&P, tollage, royalties, staging, scaffolding, all transportation charges, all taxes excluding GST etc. all complete as directed by the Engineer- in- charge .

Brick work

RCC work

40mm thick graded concrete with C.C(1:2:4) by using CBG chips of 12mm and down grade of approved quality in superstructure adding 2% W.P.C (plastocrete plus) by weight of cement including mixing, hoisting, laying, consolidating, laying to proper slope and level, finishing smooth to the exposed surface with curing including supply & cost of all labours, water, materials ,T&P, royalties, tollage, transportation, safety arrangements for labours, Port entry fee all taxes excluding GST etc. all complete as per the direction of Engineer-in-charge.

Supplying, fitting & fixing of Gypsum board false ceiling with GI frame, stay, hook, nut, bolts including fixing of board, nylon tape over joints & applying two coat putty over it with two coat plastic emulsion paint & finishing including cost & supply of all materials, labour, T&P, transportation charges, staging, scaffolding,taxes if any excluding GST etc. all complete as directed by the Engineer-in-charge.

Supplying, fitting, fixing of 12mm thick toughened glass of required size as per approved design fixing with providing rubber beading, aluminum U channels, angle, clips, required nos. of all fittings as per I.S.I. specification, etc. all finished with supply of all materials, labour T&P, royalties, tollages ,transportation, staging, scaffolding, taxes if any excluding GST, etc all complete as per direction of Engineer-in-Charge.

Writing letters of different size with approved paint & colour at any height including cost & supply of all materials, labour, T&P, transportation charges, staging, scaffolding,taxes if any excluding GST etc. all complete as directed by the Engineer-in-charge.

Providing, fitting & fixing double leaf Automatic Sensor Glass Door with sliding facilities for a door opening of 2.00mtr and providing fix glass door for 1.10mtr opening at both end with following technical specification i) door weight 150kg each minimum ii) AC power SMPS140-280V AC/50HZ/1P/100W iii) open close speed 250-500mm/s iv) opening time 2-20sec v) lock force >500N vi) hand push force <50N vii)Brushless Mortor, 36 V/100W power , High efficiency, big force & long life viii) Alluminium channel 4.20mtr ( standard) / 6.0 mtr ( optional ) ix) Motion sensor mocro wave type / mocro processor control / 4 Mt(w) x 2 Mt(D) range x) Standby power <10 Watts xii) microcontroller based to set door parameters with other accessories door clamp with wheels & standard acessories with remote control/ control lock, with supply all all labour, materials, T&P, machineries, transportation , scaffolding, including safety arrangement, etc. all complete as per approved design & specification as directed by Engineer-in-charge. [NB:-1) Provision for adjustable opening/closing speed and distance 2) Adjustable Auto close delay time 3) During power failure doors can be opened manually 4) Safety stop when meet obstacles during closing weight carries upto 250kg.] [ N.B.: The work shall be executed by the skilled workers in this field authorised from the company from whom the materials being purchased by the agency. Relevant documents must be furnished regarding engagement of authorised company workers alongwith purchase invoice including testing records]

Supplying, fitting, fixing of mosquito proof net for door shutter & window shutter openable / sliding made of Aluminium frame for style, top rail, bottom rail, lock rail with mosquito proof net (Plasto net 20mm. x 20mm. square mesh) / (Netlon insect screens 20 x 20 square mesh) of approved qualitywith all aluminum Handles, tower bolts, stainless steel hinges of approved size/quality etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supplying, fitting, fixing of 8mm thick antimicrobial germfree ceramic glazed tile of approved quality,shade & size of 300mmx600mm or above , over wall fixing over a 20mm base course of CM(1:4) and cement slurry including cutting to size filling the joints with tile grout ,fixing to proper leveletc. mending good to all the damages at any height & any levels etc. all complete including cost and supply of all materials, water, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supplying,fabricating and fixing of stainless steel handrailing using copper coated top railing 50mm dia. of 2mm thick circular pipe with fabricating with newel posts of 75mm dia. x 900mm height balustrade of size 32mm dia.x 2mm thick @ 0.9 m c/c and pipe bracing of size 32mm dia. x 2mm thick in 3 rows at staircase and other place as required as per approved design & specification,muffing,polishing etc. at any height,at any levels etc. all complete including cutting grove in granite tile with white cement, mending to the damaged portion with cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of plinth mounted outdoor type LT ACDB panel comprising of the following switch gears: [i] As incoming:- 01 no. 400 amp. 4 pole MCCB with 4 nos. of 150 sq. mm Copper bus-bar. [ii] As outgoing:- 03 nos. 125 amp. 4 pole MCCB, 03 nos. 63 amp. 4 pole MCCB with indicator. Approximate Size of Panel - (1800 x 1250 x 350)mm.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of wall mounted indoor type LT ACDB panel comprising of the following switch gears: [i] As incoming:- 01 no. 125 amp. 4 pole MCCB with 4 nos. of 32 sq. mm Copper bus-bar. [ii] As outgoing:- 01 no. 63 amp. 4 pole MCCB, 03 nos. 32 amp. 2 pole MCB with indicator.Approximate Size of Panel - (1000 x 800 x 250) mm.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of wall mounted indoor type LT ACDB comprising of the following switch gears: [i] As incoming:- 01 no. 63 amp. 4 pole MCCB with 4 nos. of 16 sq. mm Copper bus-bar and indicator. Approximate Size of Panel - (350 x 625 x 200) mm etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 10 KVA online UPS with 2 hr battery back-up complete with 24 nos. 12 volt, 75 AH battery. Input 3-ph, 50 Hz, & output single phase, 50 Hz. etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 8-way BDB having 8 nos. of 20 Amp. DP MCB.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of l.l KV grade, 3.5 C X 120 Sq. mm XLPE insulated stranded and shaped Aluminium conductor cable with Galvanised steel strip armour etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge. .

Supply of l.l KV grade, 4 C X 50 Sq. mm XLPE insulated stranded and shaped Aluminium conductor cable with Galvanised steel strip armour.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of l.l KV grade, 4 C X 25 Sq. mm XLPE insulated stranded and shaped Aluminium conductor cable with Galvanised steel strip armour.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 4 core x 16 sq. mm flexible copper cable.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of l.l KV grade, 4 C X 06 Sq. mm XLPE insulated stranded and shaped Aluminium conductor cable with Galvanised steel strip armour.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 4" dia. Heavy gauge GI pipe.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 15 watt, 300 mm dia recess mounted round LED light fitting having inbuilt LED lamps.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 15 watt, (1ft. X 1ft.) recess mounted square LED light fitting having inbuilt LED lamps.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of recess mounted 40 watt, (2ft. X 2 ft.) LED light fiitings complete with inbuild LED lamps.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 40 watt gate top post light fittings with aluminium body for gates complete with LED lamp.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 3 Star rated or above, 1.5 Tr Split AC with cordless remote control and 100 % copper tubes for both condensor and evaporator. etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge. Warranty: One year on Machine and 5 years on Compressor.

Supply of 1200 mm sweep ceiling fan, 230 Volt having copper winding and double ball bearing with 2 nos. canopies.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 400 mm propeller type ventilating exhaust fan.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply, Installation & Commissioning of lighting arerestoer for hospital building and earth connection to LA.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 250 watt PA amplifier, Model: SSA-250DP.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of Ceiling speaker, Model: CSD-6303T.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of wireless podium Microphone, Model: AWM-630VG.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of dual wireless microphone, Model: AWM 520V2.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to LED light point with 6 / 10 amp. modular switch and copper wire alongwith modular board & plate. etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to Ceiling fan / Exhaust fan point with 6 / 10 amp. modular switch and regulator alongwith modular board & plate.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to 6 / 10 amp. plug & socket with modular type switch and wiring to call bell point with modular push bell switch along with modular board & plate.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to 16A modular type plug point with provision of switch & socket alongwith modular board & plate.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to A.C point with 4 sq. mm copper wire along with earth wire, supply & fixing of 32 amp. DP MCB and 16 amp. modular socket with plug top. etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to intercom telephone points by cutting of cement plastered brick wall, making of groove in the wall, puting of polythene / PVC pipe including supply of wiring materials & telephone jack mini, T&P and labour as per scope of work.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to T.V point with 6 amp. Modular switch & socket with TV round pin board.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to Ceiling speaker point.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to BDB point.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Wiring to 90 watt LED streetlight with 3 core x 1.5 sq. mm copper flexible cable.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Execution of special earthing using 20 ft. Long heavy gauge GI pipe and other related earthing materials.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Connection from earth pit to the lighting arrestor and LT panels with supply of 25 x 4 mm GI flat nuts & bolts and clampsetc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Installation of plinth mounted indoor type ACDB panel comprising of [i] As incoming:- 01 no. 400 amp. 4 pole MCCB with 4 nos. of 400 sq. mm Copper bus-bar. [ii] As outgoing:- 03 nos. 125 amp. 4 pole MCCB, 03 nos. 63 amp. 4 pole MCCB with indicator and conection of cables as per scope of work.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Installation of wall mounted indoor type LT ACDB panel comprising of the following switch gears: [i] As incoming:- 01 no. 125 amp. 4 pole MCCB with 4 nos. of 120 sq. mm Copper bus-bar. [ii] As outgoing:- 01 no. 63 amp. 4 pole MCCB, 03 nos. 32 amp. 2 pole MCB with indicator.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Installation of wall mounted indoor type LT ACDB panel comprising of the following switch gears: [i] As incoming:- 01 no. 63 amp. 4 pole MCCB with 4 nos. of 100 sq. mm Copper bus-bar and indicator.

Installation of 10 KVA online UPS with 24 nos. 12 volt, 75 AH battery.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Road cutting, laying of GI pipe and relay the road as before.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Preparation of kutcha cable trench of size 300 mm (W) x 750 mm (D).etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Laying of different size cable in kutcha cable trench & back filling of the trench.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Fixing of Light Fittings.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Fixing of Ceiling fan / Exhaust fan.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Fixing of street light fitting with supply of G.I bend pipe.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Fixing of 40 watt LED post top decorative light for gates.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed Microprocessor based 4 loops intelligent Networkable digitally addressable type fire alarm control panel with LCD display. The loop capacity shall be able to take minimum 180 addressable devices in one loop. Input voltage 230 Volt, 50 Hz along with automatic battery charger and 24 volt sealed dry type batteriesetc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed Active LCD Repeater panel with 5.7" TFT Colour display having minimum 240 characters.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed addressable Multicriteria / Multisensor detector with mounting based LED, address switch to programme the detectors from 01 - 99, with BASE complete as requiredetc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN Listed Fault isolator Module for isolating shorted, de-wired and loose circuits between two successive fault isolators.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed sounder with 90 db output at 1 meter distance cum strobe lights with 110 db. The strobes shall be synchronized for better exacution.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed addressable, Integral Microprocessor based double action / hand push, loop powered, re-settable Manual call Point having unbreakble glass.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of UL / EN listed addressable control relay module for Elevator control, address switch to programme the modules from 01 - 99, etc. all complete as required as per specifications.including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of 2 Core flxible copper FRLS cable.etc. all complete etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of PVC Conduit pipe.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of heavy duty C-clamp / U- clamp.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply of cable tie.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Installation, networking & commissioning of the system including supply of RS-485 / Networking card and UPS etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Supply and fixing of fluorescent type Exit sign strip of size 12" x 6".etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

Charges towards AMC of the Manual alarm System of COVID-19 Hospital after expiry of warranty period.etc. all complete including cost and supply of all materials, labour, T&P, transportation in all floors, taxes if any excluding GST. etc all complete as per direction of Engineer-in-charge.

M/S BHAIRAB CHARAN SWAIN

Pramod Kumar Nayak

CMRGS INFRASTRUCTURE PROJECTS LIMITED

Bidyadhar Swain