Maintenance and repairs to the Anna Park at Thiyagaraya New street No 3 in ward no 70 Central Zone

Amount

Cleaning the light jungle etc completed as per direction of officers

Removing the existing damaged interlocking stone as per the direction of departmental officers etc. complete

Dismantling the existing damaged Floor Tile as per the instruction of Departmental officers etc., complete

Dismantling the existing damaged Cement Concrete as per the instruction of Departmental officers etc., complete

Dismantling the existing damaged brick work in Cement mortar as per the instruction of Departmental officers etc., complete

Dismatling existng damaged Vitrified tiles as per the direction of departmental officers etc., complete

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shales etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 10m initial lead and 2m initial lift as per the direction of Engineer-in-charge.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Supply and filling with M-sand layer by layer including labour charges etc completed

Providing Rubber Mould inter locking Concrete block flooring of approved designs of compressive strength 200kg/cm2 over base of sand filling using the earth rammer to ramming and consolidation before and after laying the blocks including to the maintain the gradient and alignment etc complete.

BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of second class (Ground moulded) bricks of size 9"x4 ½"x3" for the following including curing etc., complete complying with standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

PLASTERING with cement mortar 1:5(one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

Painting with First Quality Emulsion paint two coats over a priming coat including cleaning, scrapping, removal of dust and necessary plaster of paris putty works wherever required etc., complete.

Painting with first quality emulsion paint two coats including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed

Painting with enamel paint two coats over base coat for new iron works using good quality and approved colour etc. completed.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter.

Supplying and fixing of position of Indian make white glazed earthwere wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P.1 Waste coupling, coupling, Rubber plug and chain, 32mm dia 'B' 4322.40 Nos class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc

Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification

European Water Closet (white ) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supply and delivery and fixing of HDPE tank (1000 Litre)as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying and fixing with galvanished iron sheet (corrugated) 24 gauge thick including necessary bolt, nuts and bitumen washed etc., completed - 10 m2

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid Pipe concealed in wall and celling with PVC accessories with TW Switch box in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14SWG TC wire for making good of the concealed portion with suitable colour for pvc concealed light point/fan point (SD26)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable PVC rigid Pipe concealed on wall and celling with PVC accessories, In flush with wall, with 150mmx100mmx113mm TW switch box wall 3mm thick Hylem sheet cover for 5A 3 pin non inter locking CS Plug with continuous earth wire connection of.14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD38)

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable Pipe on wall and celling with PVC accessories with 150mmx100mmx63mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point. (SD 39)

Supply and fixing of Single box type 4’40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting (SD-88)

Supply and fixing of 20 watts LED street light fitting et complete

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD-56)

Supply and fixing of 1200 mm (48”) AC ceiling fan complete with energy efficient fan of 28 W Regulator with 0.3 m down rod on existing clamp approved brand and good quality as per the departmental officers instruction etc.,Complete (SD 108)

Supply and fixing of 450mm (18") sweep (light duty) AC Exhaust fan complete without provision of hole to wall (SD 119)

Supply and fixing of swing two seater with bit of 8'-0" above GL using 50mm dia ms pipe 9swg with 3.65mm on wall thick with one coat of primer and to coats of enamel paint and seat using with paddale wood with polishing

Supply and fixing of slide ladder park model using 16g MS sheet for sliding 8'-0" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc

Supply and fixing of twin sea saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1" paddale wood with polish as per direction of departmental officers.

Supply and Fixing of Double Swings 60mm Cross Bar with hooks fittings 10ft long 48mm, 4 nos of support pipes 91/2 ft long and 1/ " GI Chain with 2 FRP seats 21" x 10" inclduing painting anc installation of 4 pits 11/2 x 11/2 ft 2 ft deep with cement concrete etc., complete as per the direction of departmental officers

Supply and tixing of merry-Go-Round using MS pipe of 50 die and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seat approved by the Executive engineer before use on work.

Formation of garden using Korean carpet grass including forming of ground for planting with filling of red gravel with sand mixture upto 150 mm thick including application of fertilizer and maintenance for 6 months etc., complete.

Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm MS. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the Executive engineer before use on work.

Providing 7 rows "Y" type barbed wire fencing over compound wall using "L" angle 50X50X6mm fixing 1.35m ht. 2.40m C/C C.C 1:3:6 mix using 20mm jelly

M RAMARAJ (BID ID -1261837)