Construction of Multipurpose Building at Serayampalayam H/O Vellanaipatti Panchayat

Amount

1.Name of the work : Construction of Multipurpose Building at Serayampalayam H/O Vellanaipatti Panchayat. SS Kulam union in Coimbatore District under MLACD 2024-25-Package No. TN 01-SSKM 05

Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Supplying and filling in basement with filling M- sand in layer of not more than 15 cm thick well rammed etc., complete.

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification..

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors etc., complete

Plastering surfaces of RCC items such as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc.,as directed by departmental officers etc, complete complying with standard specifications.

Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications.

Weathering course with brick jelly lime concrete using 20mm brick jelly with of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing, laying ,and finishing etc complete

Finshed with one course of pressed tiles of size 23x23x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost andconveyance of all materials to site and all labour charges etc complete for 10 Sqm

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Supplying of steel doors, ventilators and windows including cost of steel plates, angles , labour charges etc complete 1.steel door ( 1.2 x 2.10 m )

2. steel window ( 1.2 x 1.30 m )

Labour Charges For Fixing of steel doors, ventilators and windows including cost of steel plates, angles , labour charges etc complete 1.steel door ( 1.2 x 2.10 m )

2. steel window ( 1.2 x 1.30 m )

Distempering with oil bound distemper two coats with best approved colour including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

SUB EST Electrification :Wiring with 2x1.5sqmm(22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe of concealed in wall and ceiling with PVC accessories in flush with wall hylem sheet 3mm thick with TM box and 5A FT Switch with Continious each connction of 14 SWG TC Wire for Making Good of the Conceled Portion with Suitable Colour For PVC Open light Point/Fan point (For Electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug wvith N continuous earth wire connection of 14 SWG TC wire for making good jof the concealed portion with suitable colour for concealed PVC plug_point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 /0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia Gl_pipe (Class'B ') suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj/ Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fxing of LED bub SD 80

Supply and ixing of 1200 mm (48") AC celiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing or, single box type 4'40 W flu fting complete with copper choke and condensor with conduit pipe suspension from the 'ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handie) on suitable TW box PWD Earthing SD 142

Supply and fixing of TNEB Meter board SD 125

SUB ESTIMATE For PAVEMENT :Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X '3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification.

Reinforced cement concrete 1:3:6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Reinforced cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

V R JAYANTHI (BID ID -1211930)