Construction of building of Municipality Bhawan in Julana.

Providing and fixing Glass fiber Reinforced Concrete(GRC) screen 50 mm thick on border and 35mm thickinside in approved size, pattern, Design and . Thescreen should be made with ’53 grade’ white Portlandcement manufactured by ‘Birla White/JK’ or equivalent, Alkali Resistant Glass fibers manufactured by ‘Owens corning’ or equivalent, Quartz, fine silica sand, Super plasticizers manufactured by‘BASF/PERMA’ or Equivalent, U.V. resistant Synthetic inorganic Pigments should be used for pigmentationmanufactured by ‘Bayferrox’ or equivalent, the material casting should take place in Synthetic Rubber / FRP Mould. The Fixing of Screens should be Dry Fixing i.e. to be done with Stainless Steel (SS-304) or GI ‘L’ Shaped Clamps, dash fasteners and pins including MS Structure and complete in all respect as per the entire satisfaction of engineer in charge re satisfaction of engineer in charge

DSR 28.1.2 -`Supplying, installation, testing and commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.`

DSR 28.1.3 -`Supplying, installation, testing and commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain and hammer assembly complete with glass and push button etc. as required.`

DSR 28.1.5 -`Supplying, installation, testing and commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.`

DSR 28.1.6 -`Supplying, installation, testing and commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate and suitable for operation with amplifier i/c line matching transformer etc. complete as required.`

DSR 28.1.8 -`Supplying, installation, testing and commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob and speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required.`

DSR 28.1.9.1 -`Supplying, installation, testing and commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.`

DSR 28.5.1 -`Supplying and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring and LSZH outer sheath complete as required.`

DSR 39.23.3 -`Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with `U`Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL and RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.`

DSR-39.11 -`Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must be of 1U height with clear label holders and white label with the panel.`