ADDN/ALTN TO CERTAIN MD ACCN AND SPECIAL REPAIR TO CABLES, POLES, SECURITY LIGHTS AND ALLIED WORKS AND CERTAIN MINOR WORKS AT AF STN KANHERI HILLS UNDER GE AF THANE

Amount

Material and labour for sub main wiring complete with 2 run of 4 sqmm, single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded duly colour coded cable drawn through and including PVC casing and caping of size 25mm width or above as required at site and accessories such as tee, corners,overlaping connector etc of suitable size fixed on surface of walls/roofs/ceiling and including 01 run of 4 sqmm single core, copper conductor cable 1100 volts grade, FRLS type, PVC insulated, unsheathed, flexible, multi stranded of green colour as earth continuity conductor connected to common earth dolly including removing old unserviceable itemcomplete and making good the disturbed surfaces to match with existing all as specified and directed. Note : - 02 run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable and 01 run of PVC casing and caping shall be measured as one unit.

Supply and fix in repair MCB SP 6 to 32 Amps,10 KA, "C" series, 240 volts complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosures with two pin and earth plug and socket complete with single pole MCB 20 Amps complete all as specified and directed.

Supply and fix in repair, factory made, sheet metal enclosure, double door, 415 volts, AC,TPN, vertical distribution board, 4 way, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, and making good the disturbed surfaces to match with existing all as specified and directed.

Supply & fix in repair MCCB FP 63 Amps,16 KA, 240 volts complete all as specified and as directed.

Material and labour for XLPE insulated, LT armoured electric cable with aluminium stranded conductor 1100 volts grade ,cross-sectional area 95 sqmm; 3.5 core laid in trenches/pipes/ducts/walls with necessary cable lugs and glands, nuts, bolts and washers etc and testing complete all as specified and directed.

Ditto as per Srl Item No 6.00 above but of size 70 sqmm; 3.5 core.

Ditto as per Srl Item No 6.00 above but of size 50 sqmm; 3.5 core

Ditto as per Srl Item No 6.00 above but of size 35 sqmm; 3.5 core

Supply,lay and testing in replacement of cable XLPE insulated,galvanised steel strip armoured,1100 volts grade with multistranded aluminium conductor of cross-sectional area 25 sqmm; 3.5 core laid in trenches/pipes/ducts/walls and connection with necessary cable lugs and glands, nuts, bolts and washers etc and testing including removing old unserviceable item complete all as specified and directed. Note for Srl Item No 7 to 10 :- (i) Excavation & Earth work,sand cushioning, cable cover and protection pipe shall be measured and paid separately. (ii) The cable shall be in one length unless otherwise directed by the Engr-in-charge as per site requirement

Ditto as per Srl Item No 7.00 above but of size 16 sqmm, 4 core

Ditto as per Srl Item No 7.00 above but of size 10 sqmm, 4 core

Ditto as per Srl Item No 7.00 above but of size 6 sqmm, 2 core

Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

M&L for providing dry river sand for cushioning to UG cable including punning down of sand in layers all as specified.Note :- Quantity of Sand will be measured after punning down.

Supply and laying unreinforced precast factory made concrete cable cover, class LV, Type -I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed.

Supply and lay GI pipe 50mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item complete all as specified and directed.

Supply and lay GI pipe 100mm dia light grade in any length with all GI fittings such as socket, elbow, bend, union, Tee etc laid in trenches/duct/culvert/road crossing etc for protection of cables including removing old unserviceable item ,complete all as specified and directed.

Supply , installation, testing and commissioning of totally enclosed LT electric panel outdoor type (IP-55) fabicrated out of 3.15mm thick CRCA, CPRI approved sheet dust and vermin proof powder coated double door type independent cabin including locking arrangement for each ACB/MCCBs, bus bar chamber enclosed complete suitable for operating on 415 volt 50 Hz AC supply internally wired with copper conductor/strip of adequate size from main incoming MCCB to bus bar and bus bar to outgoing MCCB/MCBs having legs 45cm made out of 65x65x6mm angle iron grouted on brick masonary platfor upto 30 Cm. Brick masonary platform should be 60Cm above the ground level, comprising the following:- (a) MCCB 250 Amps,FP, 36 KA,415 volts,50Hz-02 No (b) MCCB 125 Amps,FP,16 KA,415 volts,50Hz-2Nos (c) MCCB FP 40 to 100 AMPs-4 Nos (d) Digital voltmeter,with VSS -01 set,Digital, Ammeter,with CTs & ASS-01 set (e) LED phase indication lamps RYB-01 set (f) Aluminium bus bar TPN 400 Amps rating -01 set

M&L ,in repair, Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised strip of size 32x6mm from earth electrode to test point/equipment or up to 7.5 metres whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,with suitable handle, angle iron made of frame out of angle iron of size 40x40x4 mm,including excavation/earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed by Engr-in-charge.

M&L, in repair, Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and water pipe 20 mm bore GI light grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 & RCC cover all as specified & shown in elect plate No. 3 of SSR part I of 2010 including testing on completion ,complete all as specified and as directed by Engr-in-charge.

Material and labour in repairs earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 25 X 4 mm from earth electrode to test point or up-to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Part-I provision of G I Pipe 40mm bore eight grade for protection of GI strip and GI watering pipe of 20 mm bore medium grade,GI funnel with wire mesh,including char-coal, salt packed all around the earth electrode plate in layers,PCC earth pit chmaber of size 30cmx30cm made of 1:3:6 type C1, with suitable handle, angle iron made of frame out of angle iron of size 40x40x4 mm ,excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value ,complete all as specified and as directed by Engr-in-charge.

Taking down Old unserviceable rusted MS/GI/PCC pole after disconnecting electric supply & security camera connection ,light fittings with clamp , junction box, light grade GI pipe, including S&F 7.00 meter height hot dip Galvanised octagonal pole complete with base plate, foundation nut, bolts,top cap & PCC/RCC foundation as per manufactures recommendation.Refixing the serviceable Light fitting on new pole,re-fixing security camera (if any) with its clamp, connection all as specified and directed by Engr-in-Charge. Note :-(i) The cost of taking down LED light fitting/ camera & refixing the same is deemed included in this item nothing shall be paid extra in this account. (ii) The unservicable street light fittings, 3 core 1.5 sqmm cable,clamp shall be paid and measured in relevent items of BOQ.

Supply and fix in repair LED street light fitting 35 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 65 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and , complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair LED street light fitting 60 watts, made in pressure diecast housing with eppoxy power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting , complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair LED flood light luminaire 170 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc. , complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair LED flood light luminaire 210 watts with secondary optics made in pressure die cast housing and heat sink in aluminium of IP-66 protection comple with all accessories duly prewired and including fixing arrangement on high mast poles/wall surfaces etc. at any height providing clamps, nuts, bolts and washers etc., complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair LED bollard light fittings 9 watts cone shaped integral decorative with polycarbonate diffuser with IP-65 protection complete with all accessories and internally prewired and necessary fixing arrangement on PCC platform by providing GI bolts ,complete all as specified and as directed by Engineer-in-Charge. Note : PCC will be meaured and paid seperately.

Supply and fix in repair LED 15 watts bush and spike light luminaire with IP-65 protection complete with all accessories duly prewired and connecting with PVC insulated, sheathered flexible copper conductor cable 3 core 0.5 sqmm of adequate length from looping box to light fitting ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair LED post top lantern light fitting 35 watts with cast aluminium spigot lid cover and clear acrylic cover with IP65 protection complete with all accessories including fixing arrangement on top surface of boundary wall or on pillar by providing GI pipe of suitable size and length as per site requirement and making good the disturbed portion to match with existing surface,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix, in repair, GI bracket pipe of size 25 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type and the GI bracket pipe shall be fixed on wall/pole, steel/PCC surfaces by providing suitable MS iron 25x4 mm clamps 2 nos of length as required at site to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts,bolts & washers ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix, in repair,FRP looping box of size 200x140x95 mm with connector and comprising of MCB SP 6 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall/steel tubular pole etc ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix, in repair, copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 3 core ;1.5 sqmm and including connection and testing ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rigid non-metallic PVC conduit 25 mm dia medium grade including conduit accessories for encasing the cable from looping box to street light fittings on PCC poles/on wall surfaces as per site requirement with neccessary base saddles ,complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair LED Solar street light fitting 24 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor (Excavation & earth work shall be measured separately)complete all as specified and as directed by Engineer-in-Charge.

Supply and fix,in repair, digital time switch(Daily time switch) suitable for outdoor ,power contactor 63 Amps ML-2 type,3Phase,415 volts and MCB TPN 63 Amps,10 KA 'C' series , including bus bar of suitable capacity with arrangement of auto/mannual control switch duly prewired and all accessories same shall be enclosed in and including sheet metal enclosure of 3.2 mm thick CRCA sheet of adequate size with powder coated, fixing arrangements on floor including powder coated painting and mounted on 50x50x6mm MS angle iron frame duly painted ,complete all as specified and directed by Engr-in-charge.

Supply & fix fans wall mounting fan 400 mm sweep,230 volts, single phase oscillating, white in color with all accessories and fitting at any height all as specified and directed.

M&L for Point wiring for one light point/fan point/ bell point controlled by one switch with 1.5 sqmm PVC insulated FR LS copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and caping heavy duty with all fittings (ISI Marked) , controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, making good the disturbed surfaces to match with the existing specification complete all as specified. (a) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

M&L for switch socket combination 2 in 1 5A ,230 Volts, flush type ,complete all as specified and directed by Engr-in-charge.

M & L for ceiling rose, 3phase/ PVC/ polycarbonate, isolated body ,complete all as specified and directed by Engr-in-charge.

Supply and fixing timer for split air conditioner for 2 ton Air Conditioner complete with its fittings ,complete all as specified and directed by Engr-in-charge.

Supply,install, testing and commisioning of split type air conditioner 1.5 TR capacity with cooling function of with cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, drain pipe of suitable size brought upto ground level from any height including making cable connection by providing three core 2.5 sqmm copper conductor cable PVC insulated, sheathed of adequate length as required at site and initial filling of refrigerant gas including making round hole on existing any type of wall (core cutting if required) for taking up refrigerant tubing, drain pipe and cables etc and making good the disturbed surface by matching with existing adjoining surfaces complete all as specified and directed .

Supply and fix in replacement of sheet metal enclosures with two pin and earth plug and socket complete with single pole MCB 20 Amps ,complete all as specified and directed by Engr-in-charge.

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out voltage stabilized at 20 volts with accuracy of± 2.5% and of capacity 4 KVA ,complete all as specified and directed by Engr-in-charge.

Supply and fix Flame proof weather proof Exhuast Fan of 350 mm sweep ,complete all as specified and directed by Engr-in-charge.

M&L for Flame proof point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed FRLS cable 1100 volts grade, multi stranded with copper conductor drawn through and incl ERW steel conduit with conduit accessories fixed on wall/roof/floors etc and MS terminal boxes concealed in walls covered with plastic laminated top cover 3.0 mm fixed with cadmium plated iron screws etc incl 1.5 sqmm PVC insulated, unsheathed FRLS copper conductor multi stranded cable 1100v grade as earth continuity conductor & connecting to common earth dolly all as specified for one light/fan point controlled by one switch

S & F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V ,complete all as specified and directed.

Supply and fix Flame proof weather proof fluorescent fixture 1 x 40 W x 4' ,complete all as specified and directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw mounting on GI pipe 50 mm dia reqd as per site for open location and fixing on wall at closed to wall location all as specified and as directed by Engr-in-Charge.

Supply, installation, testing and commissioning of fire alarm control panel complyin with BS EN 54 two loop panel with 99 detectors and 99 modules and upto 200 detectors and module (per each loop) for annexes ,complete all as specified and directed by Engr-in-charge.

Supply, installation, testing and commissioning of detectors complying with and type certified to EN 45 addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS : 11360 (For annexes)

Supply, installation,testing and commissioning of addressable manual call point/pill station with base ,complete all as specified and directed by Engr-in-charge.

Supply, installation,testing and commiisioning of fire alarm sounder/siren electronic type horizontal single stage continous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db for 500 mtrs range ,complete all as specified and directed by Engr-in-charge.

Supply, fixing and testing PVC insulated FRLS copper conductor cable twin core 1.5 sqmm armoured 1100 volts ,complete all as specified and directed by Engr-in-charge.

Saviour Security Systems (BID ID -3116036)

DARSHAN CONSTRUCTION Co. (BID ID -3115805)