SPL REPAIR TO BLDG TR-112,TR-120,P-116 ALONGWITH CERTAIN REV AND MINOR WORKS WITHIN AOR OF AGE B/R-II AT RAKHMUTHI AND PALLANWALA MIL STN UNDER GE SOUTH AKHNOOR.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed .

Dismantling wrought iron or mild steel work/ structural steel work of any description not otherwise provided for ,complete all specified and directed.

Dismantling asbestos cement corrugated,semi-corrugated ,etc roof coverings including ridge ,complete all specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles ,complete all specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.,complete all specified and directed.

Surface excavation not exceeding 30 cm and averaging 15 cm deep and getting out in any type of soil, complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth , for manhole,pipe line,cables, foundation etc not exceeding 10.00 sqm on plan and getting out in any type of soil,complete all as specified and as directed .

Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil, complete all as specified and as directed .

Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed .

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed .

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws ,complete all specified and directed.

Providing and fixing ceiling board of 4mm thick, designer, in ceiling fixed as per manufacturer’s instructions, including powder coated galvanised iron snap grid frame work of main and tee (weight not less than 240gm/Rm), angle (weight not less than 217 gm/Rm), grid size 595x595mm, for false ceiling all as specified, and hangers not less than 3mm nominal dia, galvanised iron (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of galvanised iron wire of 2.0mm dia, length as required at site and expansion hold fasteners 12.50mm dia, 40mm long including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets,complete all specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to grade Fe 410-W (Gde E-250 quality-A),complete all as specified and directed.

Fixing only rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, confirming to grade Fe 410-W (Gde E-250 quality-A),complete all as specified and directed. Note:- Quantity of angle iron received from srl item no.02 shall be used against this item.

M&L for structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails, water cooler stands, staging for water tanks,grills ,gratings ,fastenings ,etc and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe-410-W (Grade E-250) quality A ,complete all specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregates as in foundation filling and mass concrete in foundation including necessary formwork,complete all as specified and as diected.

M&L for concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in plain cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregates including necessary formwork , complete all as specified and as directed

Supply and laying 150 mm bore salt-glazed stoneware drain pipes, Grade "A" laid in trenches and jointed, complete all as specified and as directed .

M&L for machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick cement mortar 1:6 screed bed laid and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete with machine all as specified as on stair shelves etc, complete all as specified and as directed .

M&L for rubbing and mirror polishing on marble/kota stone / stone work complete with machine as on stair, shelves etc complete all as specified and as directed .

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in hold fasts,copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork , complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in cover slabs for manholes etc, set in cements mortar 1:6,including necessary formwork , complete all as specified and as directed.

S&F TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

S&F TMT bars of 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

Construction of soakage well of size 1.80 mtrs dia and 3.0 mtrs in depth , below inlet pipe level (Depth from Pipe to Ground Level 45CM), excavation in any type of soil including plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregates) in foundation and honeycombed brick masonry in cement mortar 1:4 and reinforced cement concrete cover slab, RCC 1:1.5:3 (Design Mix) (using 20mm graded crushed stone aggregates), complete all as specified and as shown in drawing. Drawing No- CE/TD/1202/03 sheet 1/2 and 2/2 dated 09.10.03 revised 14.10.14 and 11.05.07.

S&F in repair curtain rod, 20 mm dia stainless steel fixed with brakets,stops,rollers etc , complete all as specified and as directed.

S&F stainless steel peg set of six with base plate and fixed to wall/door and including rawal pugs/ screw, complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and fair including necessary formwork , complete all as specified and as directed .

M&L for machine pressed precast concrete interlocking paver block of any size and shape confirming to IS 15658-2006 of 60mm thickness M-35 grade,including 25mm sand cushioning ,complete all as specified and as directed

M&L for 25 mm thick plain cement concrete 1:2:4 type B-2 using 20 mm graded crushed stone aggregates as in sub bases of floors and pavings etc.including necessary formwork ,complete all as specified and as directed.

M&L for reinforcement cement concrete M-25 (Design mix) using 20 mm graded aggregate as in foundation,including rafts,footing,foundation beams;plinth beam ;bases for column ,etc;basement slab ,under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for reinforcement cement concrete M-25 (Design mix) (20 mm graded stone aggregatge) for Chajjas/ Balcony/ Landing work/kitchen slab etc., complete all as specified and as directed.

M&L for reinforcement cement concrete M-25 (Design mix) using 20 mm graded aggregate as in Columns, pillars, piers, posts and struts,complete all as specified and as directed.

M&L for reinforcement cement concrete M-25 (Design mix) using 20 mm graded aggregate as in beam ,cantilever ,lintel all as specified and as directed

M&L for reinforcement cement concrete M-25 (Design mix) using 20 mm graded aggregate as in Slabs supported on walls,beams and column in floor, roofs, landing, balconies, canopies,deck slab and in shelves, all as specified and as directed.

M&L for formwork to chajjas,trough and similar item including edges,not exceeding 200 mm thick,complete all as specified and as directed .

M&L for formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, roof beams and similar work, vertical or to batter,complete all as specified and as directed .

M&L for formwork to flat finished surface of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, chajja, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed .

M&L for formwork to flat finished surface of concrete to sides to sides of pillars,piers,column, overhangs, etc.,complete all as specified and as directed .

M&L for formwork to soffit of suspended slab such as roof slab,floor slab,landing and similar work ,not exceeding 200 mm thick,complete all as specified and as directed

M&L for formwork to the sides of roof slab and similar work ,not exceeding 200 mm thick,complete all as specified and as directed .

Providing and laying at or near ground level factory made kerb stone of M-25 (Design mix) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required ,complete all as specified and as directed .

M&L for 10mm thick cement plaster in cement moartar 1:4 finishing the surface even and smooth (without using extra cement )mixed with water proofing compound as per manufactures instruction cement plaster shall be provided while the concrete of the slab is green ,complete all as specified and as directed . Note:- Cost of Water proofing compound shall be deemed to included in quoted rate.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 ,complete all as specified and as directed .

M&L for brick work with sub class `B' bricks, straight or curved on plan to any radius in half bricks thick wall built in cement mortar 1:6, complete all as specified and as directed .

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, but except bricks,complete all specified and directed.

S&F tubes, 'medium grade' galvanised, 15mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors including taking down existing tubing, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

S&F tubes, 'medium grade' galvanised, 25mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors including taking down existing tubing, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling of on concrete surfaces, finishing the surface even & smooth without using extra cement,complete all as specified and as directed .

Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces using water proofing compound , finishing the surface even & smooth without using extra cement, complete all as specified and as directed . Note:- Cost of Water proofing compound shall be deemed to included in quoted rate.

Rendering 15 mm thick in cement mortar 1:6 on any surfaces of brick work, finishing the surface even & smooth without using extra cement,complete all as specified and as directed .

Providing and fixing in repair solid PVC wall lining/panelling consisting of 5mm thick prelaminated wood grain printed PVC sheet inclusive of solvent cement and fixing at site and including PVC frame incl dismantling of wall lining and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and as directed .

S& F steel tubes, 'medium grade' ,25mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors or trenches, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

S& F steel tubes, 'medium grade' ,20mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors or trenches, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

S& F steel Tubes, 'medium grade' ,15mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm bore,pressure capacity not less than 4.50kgf/Sqcm,any radius ,fixing with adhesive ,complete all as specified and as directed .

S&F PVC (SWR) floor trap ,plain with grating including jointing with solvent cement ,dia of outlet 75 mm ,complete all as specified and as directed .

S&F 110 mm PVC (SWR) junction single, (single T) equal or unequal ,complete all as specified and as directed .

S&F PVC( SRW ) 110 mm bore vent cowl ,complete all as specified and as directed .

S&F in repair PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed .

S&F in repair 110mm bore PVC (SWR) junction single, (single T) equal or unequal,complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl ,complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) floor/Nahani trap, plain with grating including jointing with solvent cement , complete all as specified and as directed.

S&F in repair PVC (SWR) 'P' or 'S' trap of 110mm dia outlet, including jointing with solvent cement, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, laid in trenches, complete all as specified and as directed .

S&F in repair stainlees steel grating, chromium plated, size 125/150mm,with or without hole heavy duty, complete all as specified and as directed.

S & F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with brackets, complete all as specified and as directed.

S & F in repair corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with brackets, complete all as specified and as directed.

S&F in repair 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed high pressure with crutch or butterfly handle , complete all as specified and as directed.

S&F 15 mm bore CP bib taps (long body), fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and as directed.

S&F 15 mm bore CP bib taps , fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and as directed.

S&F in repair chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and as directed.

S&F stainless steel soap dish, chromium plated, any type, fixed to plugs with screws fixing in repair, complete all as specified and as directed.

S&F in repair stainless steel towel rail chromium plated 20mm dia 'D' type 60 cm long between flanges, ISI marked , complete all as specified and as directed.

S&F 15mm dia angle valve brass chromium plated screwed down, high pressure with crutch or butterfly handle concealed type with long shank cup fixed in repairs including taking down existing, complete all as specified and as directed.

M & L for non skid ceramic coloured tiles of size 600x600 mm 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4,complete all specified and directed.

M & L for non skid ceramic coloured tiles of suitable size to match existing floor tiles 8 to 10 mm mm thick, as in skirting set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match shade of tiles over 10 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work ,complete all specified and directed.

M & L for vitrified ceramic coloured tiles of size 600x600 mm 8 to 10 mm mm thick of , set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4,complete all specified and directed.

M & L for vitrified ceramic coloured tiles of suitable size to match existing floor tiles 8 to 10 mm mm thick, as in skirting set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match shade of tiles over 10 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work ,complete all specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over 10 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work ,complete all as specifed and directed.

M & L for non skid ceramic coloured tiles of size 400x400 mm and 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4.,complete all as specifed and directed.

S& F for vitreous china squatting pan, Orissa pattern of size 580x440 mm white with integral foot rest ,including provision of lime concrete bedding (excluding flushing cistern anf flush pipe) ,complete all as specifed and directed.

S&F PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia ,capacity 10 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed .

S&F in repair PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia ,capacity 10 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed .

S&F Vitreous China urinals, half stall with grating and union for discharge pipe including waste coupling 32 mm bore and PVC waste pipe 32 mm bore complete, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe , complete all as specified and as directed.

S&F vitreous china wash basin, white, flat back, size 550 x 400 mm,including brackets,pillar tap, waste coupling 32 mm bore and PVC waste pipe 32 mm bore and pedastel , complete all as specified and as directed.

S&F Vitreous china wash basin, oval shaped including 15mm bore CP Wash Basin mixer tap for mixing hot and cold water screwed down for iron pipe including waste coupling,waste pipe, cutting for and pinning in ends of brackets or erecting stand porcelain stopper a pair of CI brackets fixed in repair,complete all as specified and as directed .

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified and as directed.

S&F stainless steel grating of siz 125mm dia for drain pipe , complete all as specified and as directed.

S&F 15mm dia angle valve brass chromium plated screwed down, high pressure with crutch or butterfly handle screw both end for iron pipe or union, complete all as specified and as directed.

S&F 15mm dia angle valve in repair brass chromium plated screwed down, high pressure with crutch or butterfly handle screw both end for iron pipe or union, complete all as specified and as directed.

S&F low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15 mm bore and fixed, complete all as specified and as directed.

Supply and fixing in repair low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15 mm bore , complete all as specified and as directed.

S&F 15 mm bore chromium plated cast copper alloy bib taps fancy type with cruth or butterfly handle screwed down for iron pipe or for brass ferrule , complete all as specified and as directed.

S&F stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe, complete all as specified and as directed.

S&F stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 20mm bore pipe, complete all as specified and as directed.

S&F stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 25mm bore pipe, complete all as specified and as directed.

S&F 125 mm Chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union , complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tank of 1000 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25mm bore pipe , complete all as specified and as directed .

S&F rotational moulded polyethylene water storage tank of 500 liters capacity, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 25mm bore pipe , complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank of 1000 Litres capacity, (cylindrical vertical tanks with closed top)(White in Colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including float valve 20/25mm and taking down existing tank , complete all as specified and as directed.

Taking down chowkat or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down chowkat or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down shutters exceeding 1.00 sqm but not exceeding 2.00 sqm each,complete all specified and directed.

S&F pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F 40 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces covered with decorative face veneer with lipping/frame to match,complete all as specified and as directed .

S&F 35 mm thick 2nd class hard wood glazed shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted wifth cut and mitred beads for securing glass, gauge etc, sizes of members of shutters as specified in SSR Part I, Sec-8, clause 8.24(a), complete all as specified and directed.

S&F factory made steel window/Ventilator, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and glass sheet 3.0mm thick, 4mm thick frosted glass jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD/1517/15, sheet No- 1/3 to 3/3. Note :- Cost of all items/elements eleborated in the specification and in Drawing shall be deemed to inlcude in quoted rate.

M&L for mild steel square bar framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staging for of water tanks, cooler stand and similar work conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed .

Writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high , complete all as specified and as directed.

Writing Stops, commas, short lines, dashes, hyphens, brackets, etc , complete all as specified and as directed.

S&F 40 mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat ,complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification and drawing, including making good disturbed surfaces of wall ,complete all as specified and as directed .

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struk inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointing together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR ,complete all as specified and as directed .

S&F anodised aluminium powder coated (minimum thickness of powder coating 50micron) frame for window, ventilator with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed by Engineer-In-Charge.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.),complete all as specified and as directed .

S & F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and as directed.

S&F 5.5 mm sheet glass,ordinary quality fixed in windows in square exc 0.5 sq. m in each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and as directed.

S & F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane, sheet glass is obscured or frosted ,on one side ,complete all as specified and as directed .

S&F 100 mm long mild steel butt hinge, medium weight cold rolled and fixed , complete all as specified and as directed.

S&F150 mm long Extruded aluminium alloy handle, cast type, anodised ISI marked , complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section ISI marked , complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed , complete all as specified and as directed.

S&F mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring, ISI marked fixed in bottom body of door complete all as specified and directed.

S & F Granite (of any type) work (table rubbed and polished ) 16-18 mm thick ,as in steps,jambs,pillars,window/ventilation -cills,cooking platform,urinal partition and like including screed bed or rendering as required in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed.

S&F brass chromium plated tubular towel rail,20 mm dia,D type ,60cm long between flanges , complete all as specified and as directed.

S&F Stainless steel Soap dish, fixed to plugs with chromium plated brass screws , complete all as specified and as directed.

M&L for hard core of gauge broken stone ,gauge not exceeding 63 mm, deposited,spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L for 50mm thick, plain cement concrete M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight,including necessary formwork , complete all as specified and as directed.

Dismantling old existing roof treatment and applying one coat of universal bonding agent as per manufacturers instructions on cleaned surfaces of roof, 50mm average thick plain cement concrete 1:2:4 type B-0 (Using 12.5mm graded crushed stone aggregate) and screed bed/rendering 10mm thick on fair faces of concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra cement) when the concrete is green, including necessary formwork , complete all as specified and as directed. Note: Cost of water proofing chemical shall be included in quoted rate.

M & L for Water proofing treatment on roof top with APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, minimum weight not less than 3.0 Kg/ Sqm, 2.0mm thick, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film, laid over one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm and one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof, overlap should be not less than 150mm at ends and 75mm at sides, joints and overlaps uniformly bounded with LPG torch flame including applying of one coat of semi hot blown bitumen of 85/25 grade, @1.20 Kg Sqm and fine screened sand in dry condition @0.50 Kg/ Sqm after laying the membrane and applying two coats of aluminium paint, complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over priming plastered and other surfaces with alkalie resistant priming paint , complete all as specified and as directed.

Preparing newly plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L preparation of old plastered or unplastered surfaces of ceiling and applying two coats of white wash ,complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of white primer, complete all as specified and as directed

M&L for preparation of newly plastered wall surfaces, applying two coats of Emulsion paint over one coat of alkali resistant primer, complete all as specified and as directed .

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat chalk whiting, on plastered surfaces,preparatory to distempering, over two coats of wall care putty, complete all as specified and as directed .

M&L for complete removal of existing treatment from old plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion including priming the surface with chalk whitening over two coats of wall care putty, complete all as specified and as directed.

M&L for complete removal of existing treatment from old decorated surfaces of wall and applying two coats of cement base paint over alkali resistant primer, complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth including preparation of new and old untreated surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M &L for preparation of new surfaces of walls plastered surface, priming with alkali resistant primer and applying two coats of exterior emulsion paint in camouflage pattern , complete all as specified and as directed.

M&L for complete removal of exiting treatment from old plastered wall surfaces, applying two coats of Emulsion paint over one coat of primer, complete all as specified and as directed .

S&F centre hole basin mixture for hot and cold water, chromium plated, with round sport without pop up waste system for 15mm bore pipe, fixing , complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, flush pipe but excluding flushing cistern) and including plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device ,complete all as specified and as directed .

M&L for dura tuff pave-n-park parking cement concrete coloured tiles of size 300mmx300mmx8-10mm, with chequered finish, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 15mm thick screed bed or bedding layer in cement mortar 1:6, with grey cement and no pigment, complete all as specified and as directed.

M&L for cutting and screwing external steel tubing of size 50 mm bore for alterations or adding or lengthening screw on pipe to form connector and done in position without taking down,complete all as specified and as directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.to match with existing surface ,colour ,shade with putty and white cement for smooh finishing of holes ,small patches etc, complete all as specified and as directed .

Material and labour for point wiring (IN NEW CONCEALED CONDUITS TO SURFACES) complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core,copper conductor cable 1100 volts grade colour code drawn through and including PVC conduit 20 mm dia medium grade (MMS) including cutting, chasing work at any height and all accessories to be concealed in walls/roofs/floors/ceiling etc. flush mounting MS box with top,bottom,side/back wall, knockout for conduit with entry from any direction made out of 1.20mm thick suitable for fixing of housing of switch module for switch,socket,fan regulator,red colour indicator, blank plate etc as approved coloures including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly,complete all as specified and directed for the following:- (Note:- All necessary accessories such as box,top cover, plate, blank plate,MS box,screws,washers and all electrical fixtures are to be used of same make/brand only and box,top cover plate, MS box shall be measured and paid seperately under relevant items)

(a) One light point/fan point/ exhaust fan point/ bell point controlled by one switch ,complete all as specified and as directed .

(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board ,complete all as specified and as directed .

(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board ,complete all as specified and as directed .

Description all as per item No 157.00 above, but point wiring with 4.0 sqmm and earth conductor of size 4.0 sqmm complete all as specified and directed but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board complete all as specified and directed .

Supply and fixing switch modular type, single pole, one way, 6 Amps, complete all as specified and as directed.

Supply and fixing switch socket ,modular type,6-pin, 6/16-Amps, 3 module ,complete all as specified and as directed .

Supply and fixing switch socket ,modular type,3-pin, 16-Amps ,complete all as specified and as directed .

Supply and fixing switch piano ,one way,modular 6-Amps, complete all as specified and as directed .

Supply and fixing socket outlet, modular type 2/3-pin, 6-Amps, 2 module, complete all as specified and as directed.

Supply and fixing ceiling rose, three phase/ PVC/ polycarbonate, isolated body type, complete all as specified and as directed .

Supply and fixing white cover plate with frame,8 module, complete all as specified and as directed .

Supply and fixing white cover plate with frame,2 module, complete all as specified and as directed .

Supply and fixing white cover plate with frame,3 module, complete all as specified and as directed .

Supply and fixing LED tube light fitting, 20 watt, 4 feet long indoor decorative high lumen batten, including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting ternimal, complete all as specified and as directed .

Supply and fixing in repair LED tube light fitting, 20 watt, 4 feet long indoor decorative high lumen batten, including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting ternimal, complete all as specified and as directed .

Supply and fixing lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings including LED lamp of 10 Watt,240volts in white colour with maximum lumen 850 base cap -B22 including taking down existing lamp holder and lamp, complete all as specified and as directed .

Supply and fixing in repair LED 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed .

Supply and fixing LED 1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed .

Supply and fixing in repair ceiling light of size 600mmx600mm with bright LEDs of 36 Watt,220 V,AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder and LED lamp having superior illumination and connecting up with three core twisted flexible copper conductor cable of suitable size, complete all as specified and as directed .

Supply and fixing in repair LED secruity light fitting of capacity 35 Watt in aluminium PDC housing, toughened glass cover with IP66 protection with suitable inbuilt surge protector with bracket made of GI pipe 40mm dia light grade 1.0 mtrs long duly cut and welded at an angle of 120 degrees and fixed to wall with 50mm X 6mm MS clamps-02 nos with 16mm dia bolts,nuts and washers, complete all as specified and as directed .

Labour only for taking down and refixing/hanging ceiling fan (M.D. supply) with replacement of 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan ternimal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling in cavities with filler after cleaning all dust etc ,complete all as specified and directed.

Supply and fixing exhaust fan 300 mm sweep steel body with louvers,240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material, complete all as specified and as directed. Note: (i) Cutting of walls/wooden panel of any description and making provision of holes etc and making good to the disturbed surface to matching with the existing finish shall also be deemed to have been included in the quoted rates. (ii) The dismantled/unserviceable exhaust fan shall be deposited with MES store yard for safe custody and shall be the property of the department.

Supply and fixing deficient of exhaust fan 300 mm sweep steel body with louvers,240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge. Note: (i) Cutting of walls/wooden panel of any description and making provision of holes etc and making good to the disturbed surface to matching with the existing finish shall also be deemed to have been included in the quoted rates.

Supply and fixing deficient of exhaust fan 450 mm sweep steel body with louvers,240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material, complete all as specified and as directed by Engineer-In-Charge. Note: (i) Cutting of walls/wooden panel of any description and making provision of holes etc and making good to the disturbed surface to matching with the existing finish shall also be deemed to have been included in the quoted rates.

Supply and fixing deficient ceiling fan, metalic, sweep 1200mm, with BLDC Motor, high speed, includuing modular electronic Regulator and necessary fitting/fixtures such as Hook and clamps etc including connectig wire of suitable size and length from ceiling rose to fan connector, Rated Air Delivery in CuM/ Min- 210 Minimum, Service Value CMM/W 7.85 Minimum No of Speed 5, Insulation Class- E, Temperature Rise ,complete all as specified and directed. Note: Old Ceiling fan taken out if any from the existing opening and shall be deposited at Store Yard of MES and shall be the property of Department.

Supply and fixing of 5 star rated geyser of 25 Ltr 2KW ,BEE 5 Star rating capacity of vertical or horizontal type including making electric and water supply connections etc complete all as specified and directed. Note:- Cost of accessories -(i) 02 CP angle valve 15mm (ii) 6 RM GI pipe medium grade (iii) CP bib tap 15mm is deemed to be included in quoted rate.

Supply and fixing sheet metal enclosures DB's double door factory made power coated out ofr CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 04 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in wass and making good to disturbed surface and colour matching,complete all as specified and directed.

Supply and fixing in repair sheet metal enclosures with socket plug top and MCB, single pole and neutral socket complete with one single pole MCB 20 Amps ,complete all as specified and directed.

Supply and fixing in repair sheet metal enclosures DB's double door factory made power coated out of CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 12 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in walls and making good to disturbed surface and colour matching,complete all as specified and directed.

Supply and fixing in repair sheet metal enclosures DB's double door factory made power coated out ofr CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 08 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in wass and making good to disturbed surface and colour matching ,complete all as specified and directed.

Sub main wiring in repair (concealed conduits in surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge. NOTE: Three runs of 6.0 SQMM copper wires including PVC conduits shall be measured as one unit.

Supply & fixing in repair MCB SPN 63-100 Amps 10 KA,"C" series, AC, 240Volts, 50Hz, ISI marked,complete all as specified and directed.

Supply & fixing MCB SPN 40 Amps 10 KA,"B" series, AC, 240Volts, 50Hz, ISI marked,complete all as specified and directed.

Supply & fixing MCB SP 6 to 32 Amps 10 KA,"B" series, AC, 240Volts, 50Hz , ISI marked,complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat with width equal to length in trenches for protection of cable,complete all as specified and directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches ,complete all as specified and directed.

Supply,laying, connecting and testing 1100 volts grade,10 sqmm,2.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape ,complete all as specified and directed. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately).

Supply,laying, connecting and testing 1100 volts grade,10 sqmm,2.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape including taking down or up old unserviceable under ground cable,complete all as specified and directed. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately).

Supply,laying, connecting and testing 1100 volts grade, 16 sqmm, 4.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape including taking down or up old unserviceable under ground cable,complete all as specified and directed. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately)

Supply & fixing tubes, light grade of 40 mm bore galvanised with all fitting for cable protection in trenches/wall/on pole including necesarry clamps sets and nut & bolts, complete all as specified and as directed.

Supply & fixing tubes, light grade of 25 mm bore galvanised with all fitting for cable protection in trenches/wall/on pole including necesarry clamps sets and nut & bolts, complete all as specified and as directed .

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM, RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value , complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM, RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old unserviceable earthing items, complete all as specified and directed.

Supply & fixing Modular fan regulator, 100W, 2-module stepped type electronic fan regulaor, complete all as specified and directed.

M/S JEEVAN LAL SHARMA (BID ID -3358237)

M/s Cosmos Builder and Developer (BID ID -3358081)