REPAIR TO TILING, BRICK WORK, JOINERY, PLUMBING WORK, FALSE CEILING, ROOFING, PANELLING AND MISC REPAIR IN BLDGS AT BN-2 AREA BHALRA MIL STN UNDER GE (I) 873 EWS

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and disposal of unserviceable material, debris and rubbish to outside cantt area complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to outside cantt area complete all as specified and directed.

75 mm thick plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.

75mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth uiong extra cement complete all as specified and directed.

Taking down cement plaster or cement line plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified and directed

Rendering 10mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified and directed

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement complete all as specified.

5mm thick plastering in cement mortar 1:3 on ceiling surfaces, surface finished even and smooth without using extra cement complete all as specified.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying three coats of white wash complete as specified and directed.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed.

Preparation of newly plastered surface of ceiling and applying three coats of white wash complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off outside cantt area complete all as specified and directed.

25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in floor, finished rough to receive tiles above, complete all as specified & directed.

Non skid JOINT FREE coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Glazed JOINT FREE ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as backing coat rough finished surface complete all as specified.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and disposal of unserviceable materials, debris and rubbish to outside cantt area complete all as specified & directed.

Machine cut kota stone slab flooring, 16-18mm thick as per sample kept in GE(I)’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:6, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.

Machine cut kota stone 16-18mm thick as per sample kept in GE(I)’s office,in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm plaster in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-W (Gde E-250) quality -A complete all as specified and as directed.

Two coat of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete, all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5sqm but not exceeding 4.0 Square metre each including taking out hold fast complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 165mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24 (a) kiln seasoned and pressure treated all as specified.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and fixed in repairs, complete all as specified and directed.

Mild steel butt hinges, medium weight, cold rolled (ISI marked), 100mm long, complete all as specified.

Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, 250mm long, complete all as specified.

Mild steel barrel tower bolts stove enamelled black of size 150mm ISI marked and fixed, complete all as specified and directed.

Mild steel pressed handles, oval type, stove enamelled black of size 100mm and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 100mm ISI marked and fixed, complete all as specified and directed.

Extruded aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed.

150mm size hasp & staple, aluminium, safety type, including bolt to hinge plate and fixed with screws, complete all as specified.

150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

25mmdia PVC coated curtain rails, with fixing brackets, stops, rollers etc fixed in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless steel wire, staples all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Refixing Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Self taping screws 75mm long for fixing Pre-painted galvalume aluminium zinc coating G.I based steel sheet complete all as specified and directed.

Dismantling wall & ceiling board (fibre, pulp, insulation etc.) or insulation boards / slabs/ blankets, any thickness, including cover fillets, complete all as specified.

6mm thick non asbestos fibre cement building boards laid / inserted to anodised aluminiumsnap grid frame work for false ceiling of grid 605mm x 605mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed.

PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling all as specifed and directed.

Dismantling of existing water tank capacity 1000 ltrs complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity complete all as specified and directed.

Dismantling of existing water tank capacity exc 250 ltrs & n exc 500 ltrs complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above 250 litre but upto 500 litre, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above 500 litre but up to 1000 litre, complete all as specified and directed.

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight - 210 gms) complete all as specified and directed.

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight - 210 gms), fixed in repair, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Fixing only 15mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Fixing only 20mm dia GI steel water tubing, medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Towel rail brass chromium plated, 20mm dia, D-type, 60cm long between flanges, fixed in repairs, complete all as specified and directed.

15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

Bib taps long body 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

Bib tap standard of PTMT (colour as ordered), screwed for 15mm bore GI pipe (Min weight 90 gms), all as specified.

Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.

Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed

Stop valve of cast copper alloy screwed down high pressure, screwed both ends for iron pipe or for unions 20 mm bore, fixed in repairs complete all as specified and directed.

Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified.

Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore and fixed in repair, complete all as specified.

Water jet for EWC chromium plated with PVC connection, fixed in repairs, complete all as specified & directed.

Health Faucet, ABS body with 1 metre SS braided connection pipe for 15 mm bore pipe, fixed in repairs complete all as specified and directed.

CP angle Stop cock with wall flange, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.

PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs complete all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15mm bore pipe (minimum weight 60 gms), fixed in repairs, complete all as directed.

Vitreous china urinals, bowl type of size 430 x 370 x 340mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe), complete, fixed in repair, complete all as specified and directed.

Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, PVC 'P' or 'S' trap 100mm dia, connection to trap and fushing pipe, anti syphonage fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, complete incl flushing pipe, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete fixed in repairs complete all as specified and directed.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.

PVC connection 15mm size with length 600mm with PTMT nuts fixed in repair, complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repairs complete all as specified and directed.

Grating square 150 mm size of PTMT (Minimum weight 100gms), fixed in repair complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

Mild steel sheet eaves gutters, thickness of sheet 1mm, galvanised class 3, half round with rounded edges complete all as specified and directed.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/ floors/ fixed to wall, fixed in repair, complete all as specified and directed.

110mm bore PVC (SWR) bends any radius, complete all as specified.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

VEER TRADERS

Bidder Name

A S CONSTRUCTION

VEER TRADERS