Construction of Cycle Stand, Kitchen cum Dining hall, Stage and Railing at F.F parapet wall of Existing Building of Odisha Adarsha Vidyalaya, Lingipur in Gosani Block of Gajapati District. (Civil and E.I Works)

Earth work in excavation of foundation in hard soil or gravelly soil with all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour, labour CESS, T&P and dewatering if required for the work etc. complete in all respects as directed by the Engineer-in-charge.

Supplying & filling in foundation and plinth with good quality river sand in layers not exceeding 23cm in depth and compacted with watering, ramming, dressed and leveled the top surface to required gradient including cost , conveyance , royaoity of all materials, cost of all labour, T&P, etc.required to complete the work in all respect as per direction of the Engineer-in-charge.(Measurement willl be taken on finished compacted section only)

Filling foundation and plinth & sides of foundation with excavated materials (excluding rock), in layers not exceeding 20 cm in depth including watering and ramming and dressing and leveling the top to proper level, lead up to 50 m and lift upto 1.5 m or gradient including cost of all labour, labour CESS,sundries and T&P etc. complete in all respect as per direction of the Engineer-in-Charege

Providing and laying cement concrete (1:3:6) in foundation & plinth using 40mm size black hard granite crusher broken metal and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth, providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge.

Fly ash brick masonry in cement mortar (1:6) in Foundation& Plinth using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge.

R.C.C. work with M-20 grade In Different RCC Works having minimum compressive strength in work test of 200 Kg/Cm² in 15cm cubes at 28 days after mixing and texts conducted in accordance with relevance IS code using 20 mm and downgraded size black hard granite crusher broken stone chips and screened and washed sharp river sand of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrator, watering, curing for 28 days, including cost of centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary including cost, conveyance, royalty, Addl charg, DMF & EMF of all materials , cost of all labour, labour CESS T&P etc. required for complete the work in all respect but excluding cost and conveyance of M.S. rods or Tor steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position as per the direction of the Engineer-in-Charge. RCC Footing

Column upto bottom of Plinth Band

Plinth Beam

Roof Beams

Roof Slab

Lintel

Chajja

Supplying, fitting and placing uncoated SeQR TMT bar reinforcement including straightening bent up or coiled rods, cutting, bending, cranking, hooking, welding or jointing (if required) and binding, tying and placing in proper position as required for RCC works including cost, conveyance of steel and binding wires of 18 to 20 gauge and cost of all labour, labour CESS T&P etc. required for complete the work in all respect as per drawing and technical specification and directed by the Engineer-in-charge. (Weight of reinforcement shall be calculated on the basis of IS 1732, wastage ,overlaps, couplings, welded joints ,spacer bars, chairs, stays, and annealed steel wire or other method of binding &placing shall not be considered for payment).

Fly ash brick masonry in cement mortar (1:6) in Super structure using Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projections watering, curing etc. complete including cost, conveyance, royalties, of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect as drawing and technical specifications and as per directed by the Engineer-in-charge.

Providing and laying cement concrete (1:2:4) using 12mm size black hard granite crusher broken chips and screened and washed sharp river sand of approved quality from approved quarry as per approved design including hoisting, lowering, laying and compacting to proper thickness, watering and curing for the required period, finished smooth , providing grooves or beads where necessary including cost, conveyance, royalty of all materials with labour, labour CESS , and T&P etc. required to complete the work in all respect including dewatering if required as per direction of the Engineer-in-Charge.

Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .

20 mm thick cement plaster with cement mortar (1:4) over roof for grading with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, etc. required to complete the work in all respect, as per the Direction of the Engineer-in-charge .

Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .

Providing 6mm. thick cement plaster in cement mortar (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment using good quality screened and washed river sand, including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, labour CESS,T&P, and scaffolding as required to complete the work in all respect as per the Direction of the Engineer-in-charge .

Providing and Painting the surface of the walls with one coat of wall primer(water based) of approved quality after cleaning the plastered surface perfectly by watering and brushing including cost , conveyance of all material, brushes, all labour, scaffolding, T&P etc. required to complete the work in all respect as per specification and direction of the engineer-in-charge.

Providing & painting exterior surfaces of walls with two coats of Weather seal coat paint of approved quality and shade from a recognized company to give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,staging and cost ,conveyance of all materials ,all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge.

Supplying, fitting and fixing M.S. grill gate out of M.S. flat confirming to IS -1977/1996 as per the design approved @35kg/sqm etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc .complete as per the instruction of Engineer in-Charge.

Supplying, fitting and fixing M.S. Windows out of M.S. flat confirming to IS -1977/1996 as per the design approved @35kg/sqm etc including cost,conveyance of all materials,priming,and labour for fitting fixing etc .complete as per the instruction of Engineer in-Charge.

Providing fitting and fixing of Aluminum. door with OEL anodized AIuminum door section of 9202 as vertical member , 9201 as top member and 9200 as bottom and middle member with frame section no. 9221 and 12mm thick pre-laminated board as pannel fixed by means of tapered clip no. 4660 and frame to be completed by means of jointing angle no. 1855 with 6 liver mortise lock, including cost carriage of all materials including cost carriage of all materials [excluding cost of prelaminated board ], including cost of all labour, labour CESS , hire and running charges of drill machine , T&P required to complete the work as per specification and direction of the Engineer-in-charge.

Supplying fitting fixing aluminium windows [ sliding type ] made up aluminium section 9778 as window frame , section no. 4095,4096, and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including cost of all fittings & fixtures ,including cost carriage of all materials [excluding cost of black glass] , including cost of all labour , labour CESS , hire and running charges of drill machine ,T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge.

Providing and Finishing surfaces of walls & ceiling with cement based wall putty [ water based ] of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging and cost , conveyance of all the materials ,including cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge.

Distempering two coats with approved quality and shade from a recognized company to give an even shade including preparation of the surface before applying , including cost of scaffolding staging and cost ,conveyance of all materials ,cost of all labour, labour CESS and T&P required to complete the work in all respect as per specification and direction of the Engineer-in-charge.

Painting 2 (Two) coats with synthetic enamel paint to iron work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials, all labour, labour CESS T&P , scaffolding etc. required to complete the work in all respect as per drawing and technical specification and direction of Engineer-in-Charge.

Supplying fitting and fixing of 100mm dia PVC rain water pipe including cost, carriage of all materials , all labour and T&P etc. to complete the work in all respect as per specification and direction of the Engineer-in-Charge.

Providing ,Supplying fitting and fixing of Kota tiles, in floors and treads on steps and landing on 25mm thick bed of cement mortar 1:1(1 cement :1 course sand screened and washed) filling the joints with cement mixing with pigment matching to the shade of tile ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge.

Providing ,Supplying fitting and fixing of Kota tiles and rises of steps on 12mm thick cement plaster 1:3 (1 cement:3 sand) jointed with neat cement mixed with pigment to match the shade of the tiles , including cost of pre cast tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials, cost of all labour , labour CESS and T&P required to complete the work in all respect as per specification and direction of Engineer-in-charge.

Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia. Of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90m c/c and stainless square pipe braceng of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing,polishing etc. with cost conveyance taxes of all materials, labour, T&P required for completion of the work in all reapect as per the direction of the Engineer- in - charge.

Group-B L.P- 10 F.P- 10 C.B.P-

Group-C L.P- 10 F.P- C.B.P-

Wiring for twin control light point / Group Control with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way Modular type switch, Modular plate, suitable GI Box and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand

Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type )(make-Anchor/ Legrand /Roma/Equivalent)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 3 pin 5/6 A modular socket outlet (Separete) and 1 nos of 5/6 A modular switch connection (make-Anchor/ Legrand /Roma/Equivalent)

Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing 1 nos of 6pin 15/16Amp socket outlet and 1 nos of 15/16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Equivalent)

S/F of Multipurpose board Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and 2 nos of S.P. 5/6 amp one way modular switch on Modular G.I. Box with Modular Base and cover. (make-A

nchor/ Legrand /Roma/Equivalent)

Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required. 1 X 1.5sqmm

Supply and fixing of 4 no.s of 3pin 5/6 amp modular socket and 3 nos of S.P. 5/6 amp one way modular switch, on Modular G.I. Box with Modular Base and cover. (make-Anchor/ Legrand /Roma/Equivalent)

2 X 4sq.mm +1 X 1.5sqmm.

Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 2.5sq.mm +1 X 1.5sqmm

S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .

S/F of 20W 4' LED fitting Surface LED Light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix)

S/F of 18Watt White Circular/Square Surface LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix)

S/F of 36W 2'X2' LED Surface/ recessed on Ceiling LED fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix)

S/F of 60W LED street light fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix)

S/F of G.I. Street light Bracket with M.S. Clamp

Supply and fixing of different type of fitting with lamp S/F of 9Watt LED bulb fitting (Make-Havells/Philips/C&S/Magik/Crompton/Halonix)

S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp

Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard) S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark) Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard

Supply and fixing of Modular fan regulator(Cona/ Anchor/ Usha/Bajaj) Electronics step type Regulator (Modular type)

Exhaust fan 225mm (9") size

32-40 Amp DP MCB/ ISOLATOR

Supply and fixing of 5Amp to 32A rating 240V "B" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) Single pole (SP) MCB

32 Amp Modular DP switch/Starter

Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 8 WAY, DOUBLE DOOR

Supplying and fixing of following MODULAR type switch / socket on the existing switch box / cover including connections etc as required 6 Pin 15/16 Amp Modular socket outlet

Supply and fixing of 4pole MCCB in cubicle pannel board S/F of 100-63 AMP 25KA MCCB of Hager/Legrand/C&S Make with MS box including both side connections with all complete

Supply and fixing of copper bus bar with suitable sheet metal enclosure on MS angle frame with proper grouting on wall including all connections. 63Amp TPN bus bar -300 X 25 X 3mm size

Supply of PVC/XLPE Aluminium armored cables ISI marked. (Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha) 16sq.mm 4core

S/F of PVC T/C U.B almn. Wire with No.10/12SWG G.I supporting wire 4mm2 Almn wire

S/F of No.8 G.I wire as earth continuity

Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous with 48 Month warranty)

Supply and fixing of Inverter Supply of Invertor,UPS 1050VA Pure shine wave (Make Microtech/Su-kam/Luminous)

Supply of Invertor Stand for Single Battery stand(Make Microtech/Su-kam/Luminous)