Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹32,500
Closing Date
24 Oct 2026, 10:00 am6d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer Division Kasumpti HPPWD Shimla-
Executive Engineer Division Kasumpti HPPWD Shimla-3
Providing and laying M/T bituminous concrete 25mm thick between Rd. 0/00 to 1/00)(Without GST
2026_PWD_145830_3
SD-I-CTR-Tender-2026 19974 dt 14-10-2026
Open Tender
Civil Works
Percentage
30 days
Shimla
AS per SBD
12 documents required · 12 mandatory
₹500
₹32,500
16 Oct 2026
16 Oct 2026
24 Oct 2026
16 Oct 2026
24 Oct 2026
16 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing applying tack coat with bitumen emulsion (RS-I) using emulsion distributor at the rate of 275 kg ./sqm ( Two hundred Seventy five kilogram/square metre) on prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 3,050 | Per Square Meter | 33.9 | ₹1,03,395 |
| 2 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. (i) 50mm (fifty milimetre) average compacted thickness with bitumen of grade VG-10(ten) @ 3.50% (three point five zero percent) (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. (Excluding GST) | 22.87 | Per Cubic Metre | 11,186.44 | ₹2,55,833.88 |
| 3 | Providing and laying bituminous concrete 25 mm (twenty five milimetre ) thick with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine ) complete in all respects including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST) | 76.25 | Per Cubic Metre | 16,355.93 | ₹12,47,139.66 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
SBD1606364.pdf
Tender Documents • 7.09 MB
BOQ_217307.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .