PROVN OF BASE REPAIR FACILITY SHED AT STN WKSP EME KIRKEE UNDER GE MH AND RH KIRKEE

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dence type of soil all as specified and directed.

Excavation in trenches for taking out/laying of cable and pipe line not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide Complete and all as specified in soft and loose soil

Returning filling including spreading leveling watering and well ramming in layers not exceeding 25 cm thick each layer of soft/loose/hard/dense soil complete and all as specified.

Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point. Complete and all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil.

M & L for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (design mix) in M-25 20mm graded stone aggregates Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for Reinforced cement concrete (design mix) in M-25 20mm graded stone aggregates Columns, pillars, piers, posts and struts

M&L for Reinforced cement concrete (design mix) in M-25 20mm graded stone aggregates Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions Square, Circular rectangular on plan or polygonal

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.on flat rough surface

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement)

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement)

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 6 mm to 8 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for type C1 1:3:6 (20mm graded aggregate ) Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete

M & L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate), as in lintels upto 1.5 m clear span, cills, steps,seismic and other similar bands, plinth course, string courses, lacinng courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L Hardcore of broked stone or boulder gauge exc 63mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified.

M&L 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded agg) in sub base of floor is to be rough finished complete all as specified and directed.(Note:- laying of PCC altranative panles)

S&F 38mm width glass dividing strips, 3mm thick complete ass as specified and directed.

M/L 100mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth using extra cement.

S&F roof trusses, (framed) purline rafters, rails including distance pieces, cleats etc. all as specified and as shown on drg No CEPZ/88/TD/14/STR Sheet No 1 to 3 dated 02 Sep 1988 complete all as specified directed by Engr-in-Charge.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe 410-0 or Fe 310-0.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, but length of bolts exc 5cm but n exc 10cm long of Diameter of shank 11 to 15mm

M&L Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thickj oa an colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

M&L Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thickj oa an colour having tensile strangth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified.

M & L 75mm th PCC 1:3:6 type C-2 as in plinth protection, finished even and fair complete all as specified.

M&L for applying two coats of cement base paint on plastered surfaces of walls including preparation of new surface complete all as specified and directed.

M & L for point wiring complete with and including 1.5 Sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 volts drawn in to and including stove enamelled steel concealed conduit ISI marked of suitable size including its accessories such as tee, bend, elbow, socket also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire for housing flame proof socket, regulator, switches etc complete including necessary FLP-WP multiple entry junction box of suitable size , FLP flexible metalic hose conduit and compressing cables with glands of flameproof double compression cable glands brass of suitable size and connecting to earth dolly all as specified and directed for the One light controlled by one no of one way flameproof switch

All as per item No 32 above but for Fan point controlled by one no of one way flameproof switch

All as per item No 32 above but point wiring with 4 Sqmm cable for 15 Amp point

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into stove enamelled steel concealed conduit of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge..Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

S & F Switch flame proof rotary type with termination box in LM6, 16 A, single pole 250 V, complete all as specified and directed. Make: sudhir cat part no-RI/OA/1010-2A or equivalent make

S & F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth

Supply and fixing energy saving LED Flame proof light fitting 50 W CMRI certified suitable for Gas/Vapour group of IIA & IIB, IP 65 protection necessary screwing, fixing of exisitng iron channel required square box connecting with three core flexible wire all as specified and directed by Engr-in-Charge.

Supply and fixing energy saving LED Flame proof light fitting 2 x 16/20 Watt CMRI certified suitable for Gas/vapour group of IIA & IIB , IP 65 protection necessary screwing, fixing of existing iron channel required square box connecting with three core flexible wire all as specified and directed by Engr-in-Charge. Make: crompton cat No: EXTN1LT8-16/20 or equivalent make of Bajaj/Philips. Note:Cost of fixing materials is deemed to be included in the quoted rate.

Supply and fix flameproof wall mounting fan 600mm sweeep with three blade, with louvers WMF 140, 230 V with speed contol device/ regulator , with all connecting accessories including for mounting on wall / pillar complete all as specified and directed Note:Cost of fixing materials is deemed to be included in the quoted rate.

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6.3 mm thick buried directly in ground (earth pit not less than 3.20 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) After earthing contractor should test the earth value and submit register for earth resistance result to Engr-in-Charge. )

S & F Flampe proof MCB DB for incoming-1 No 63 amp , MCB, Outgoing MCB 08 No, 10 A mounted on wall/ pillar by using hard wooden board/ metal sheet with insulation all as directed and specified by engr in charge (Note: All MCBs are flame proof type, necessary iron angle, fixing materials and MCBs are included in quoted rate)

M & L for riddled earth for cushioning including spreading, levelling and hand punning to under ground cable in trench all as specified and directed. Note: Punned thickness shall only be measured and paid.

M&L for brick Class 'B' protection for Under ground cable all as specified and directed.

Supply, lay & testing XLPE insulated, PVC sheathed, bedded, galvanized steel strip or wire amoured electric aluminium conductor cable 1100 volts (earthed) grade of cross sectional area 50 Sqmm 3.5 core complete all as directed. Make : polycab/ Havells/ Gloster or equivalent make

Supply and fixing of 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. Make :Indoasian/L&T/ Schnider or eqivalent make

Shri Sant Cosntruction

GGS Infra

Aishwarya Constructions

SHINDE DHEERAJKUMAR SIDRAM

greenstone construction

S.R.M.K Enterprises

JP ENTERPRISES