REPAIR/REPLACEMENT OF ROOF SHEET, FALSE CEILING, TILLING AND MISC WORK IN OTM ACCN OF ZONE C UNDER AGE B/R-I AT GE JHANSI

Amount

Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed.

Dismantling timber scantling 40.0 sqcm and over in section in any position as in unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed.

S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and directed.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for 6mm thick asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed.

M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.

S&F of 40x 5 mm thick mild steel flat iron as in wind tie for roof including securing bolts confirming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of wall / ceiling boards (fiber, pulp, insulation etc) / insulation boards /slabs/blankets of any thickness including cover fillets ridges etc, complete all as specified and directed.

M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with hangers 6mm dia. Gl cleat and steel expansion fasteners with and including ceiling section (Upto1.2 m length) adujusting level fixed to roof slab adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L 25 mm PCC 1:2:4 type B0 12.50 mm Stone Agg for leveling course complete all a specified and directed.

M&L for Non skid ceramic color tiles of size exc 0.18 sqm not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.

M&L for Non skid ceramic color tiles of size exc 0.11 sqm not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles,complete all as specified and directed.

M&L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 complete all as specified and directed.

M&L for rendering 10 mm thick screed bed on fair faces of brickwork surfaces in CM 1:3 to receive wall finishes complete all as specified and directed.

Demolition of Stone slabs and tiles laid beded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for Mirror polish Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for Mirror polish Machine cut kota stone 20-25mm thick in risers of steps ,skirting ,dados and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L 20mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab including 10mm thick in CM (1:40 as in backing coat, complete all specified and directed.

M&L 20 mm thick Marble, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab including 15mm thick screed bed in CM (1:6) , complete all specified and directed.

M&L for Chequered cementconcrete tiles 20cm x20cm x 25mm thick,set, jointed andpointed in neat cement slurry in floors mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement with pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed. Note :- The cost of sand cushion is included in quoted rate.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Demolition of brick work built in cement mortar or lime mortar including all quoins arches, pillars etc complete all as specified and directed.

M&L for brick work with fly ash bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for half brick thick wall with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and directed.

M&L for preparation of old surface and applying one coat of white wash (lime) on walls inl cornices plastered or un-plastered surfaces complete all as specified and directed .

M&L for preparation of old surface and applying one coat of white wash (lime) on ceiling inl cornices plastered or un-plastered surfaces complete all as specified and directed .

M&L for preparation of existing treated surface by bruss , sand paper, surface repair if required , filling putty in holes etc on surface and applying coat of oil bound distemper white or any tinted, complete all as specified and directed.

M&L for preparation of existing treated surface by bruss , sand paper, surface repair if required , filling putty in holes etc on surface and applying two coat of oil bound distemper white or any tinted, complete all as specified and directed.

M&L for preparation of existing treated surface by bruss , sand paper, surface repair if required and applying one coat of distemper oil bound white or any tinted on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1mm thick of wall care putty on wall and applying one coat of Oil bound distemper for complete smooth finish of surfaces complete all as specified and directed.

M&L for preparation of old plastered surfaces and applying a coat of cement base paint on walls, facia , cornice, chajja complete all as specified and directed.

M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of surfaces of old wallsFinishing walls with Acrylic Smooth exteriorpaint of required shade : New work (Two ormore coat applied @ 1.67 ltr/10 sqm over andincluding priming coat of exterior primerapplied @ 2.20 kg/10 sqm) complete all as specified and directed.

Dismantling water tanks PVC any description exc 250& n.exc 500 litres complete all as specified and directed.

Dismantling water tanks PVC any description exc 500 & n.exc 1000 litres complete all as specified and directed.

S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve in repairs complete all as specified in SSR Part I.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve in repairs complete all as specified in SSR Part I.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks,complete all as specified and directed.

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm bore Brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S&F 15 mm bore Brass CP wash basin mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed.

S & F for stainless steel kitchen plate rack size 750x 600x230 mm including fixing arrange ment to walls with rawel plug or wooden plugs complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

PARAS BROTHERS

M/s SAS Constructions

S GOURAV PRAKASH ENTERPRISES

m/s ramesh saran agarwal

Total Construction & Management Services

UNIVERSAL ENGG CO