79/W/EDC-I/SRE/2024-25

Amount

Detail of Work

Safety cartage of PCC /SP 55 Poles from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Safety cartage of other lines material (Except PCC Poles) from ESC, SRE/J.E. Store to the site of work at various sites including loading & unloading at both ends (Distance 0 to 50 K.M.)

Providing and fixing of holding clamp made of new MS flat iron 50x6 mm on SP 55 poles.

Providing and fixing of F clamp made of new MS flat iron 50x6 mm on SP 55 poles.

Grouting of stay rods by digging of pits in block 600x600x300 MM & cement concreting in ratio 1:4:8 with cement, sand and brick ballast and nozzling of stay wire 7/10 SWG and fitting the same on the pole including fixing of stay insulator in stay wire.

Fabrication Charge

Erection of single PCC/ST poles SP-55, 8.5/11/13 Mtr. Long with complete fitting of all accessories of 11 KV line as per RESPO Specifications.

Concretting of ST/PCC poles 11/13/8.5 Mtr. long with cement concreting in bolck of 600X600X1500 MM. in ratio 1:4:8 with cement, sand and brick ballast size 1''x1.5'' with plinth.

Laying, lifting, Stringing, sagging jumpering & binding of ACSR Rabbit conductor on ST/PCC Pole for 11 KV Line as per RESPO specifications.

Providing of Aluminum paint and paint on Pole

Providing of Red oxide paints and paint on pole.

Pole earthing by earthing rod

Removal of old & damaged ACSR conductor from the existing poles with making bundle & shifting the same from site to JE store / ESC, SRE including loading & unloading at both ends.

Dismantling of pole.

Fabrication and Erection of D/P on PCC poles/SP55 8.5 Mtr. Long with complete fitting including concreting in block of 450x450x1500mm. in ratio 1:4:8 with cement, sand and brick ballast size 1”x1.5” as per RESPO specification.

Laying of 11 KV XLPE cable 3X185 sq mm

Fixing & Making of 11 KV XLPE Cable Heat shrinkable terminations kits of size 3x185 sqmm of indoor/outdoor side.

Safety cartage of Dismantling pole from Site to ESC, SRE/J.E. Store including loading & unloading at both ends (Distance 0 to 50 K.M.)

Providing and fixing of all type Nut & Bolt.

Guarding As per Requirment and at Road crossing pole

Safely removal and carriage of 11 KV Pin insulator (250 No), Iron Scrape (5300 Kg), II KV XLPE Cable (25 Mtr) from Site to ESC Saharanpur including loading and unloading at both ends.

Off shooting of tree branches touching the above 11 kv/LT line (No of tree Approx 400 no.)

RAJ ENTERPRISES (BID ID -5006445)

M/s Raj Kishor Contractor (BID ID -4982271)