Construction of New Sub-Registrar office at Chikiti, Ganjam for the year 2025-26 as per Revenue and DM Dept letter No. 24675 dtd. 07.07.2025 Buildings.

Civil Work : Earth work in excavation of foundation in all kinds of soil including stoney earth and gravels mixed with stone boulders (except sheet rock & boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated materials at places away from work site with all leads including cost of all labour T&P required for the work etc complete and as per the direction of the Engineer in charge.

Supplying and filling in foundation and plinth with sand excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.

Filling in foundation and plinth with available excavated earth including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Providing & applying of pre constructional anti-termite treatment by drilling 12mm dia holes at distance of 30cm @ junction of wall & floor about 300mm apart deep enough to reach the soil below & chemical emulsion (IMIDACHLOPRIED 30.5SC mixed with 47.5ltr water) pumped these holes to soak the soil @ 1 ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials, labour,conveyance, T&P , all taxes and hire charges of machinaries as per direction of Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base.

Column

Plinth Bend

Lintel

Chajja

Roof Slab

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Painting two coats with Enamel PAINT of approved shade over a coat of primer to new wood work & iron work including sand papering to polishing to surface smooth with cost, convency, cost of all materials, taxes & labour with T&P etc. complete in all floors as per the direction of Engineer-in-charge.

Providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) - Door frame 125mm x 65mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade) Calcium Carbonate and Natural Fibers (Wood powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full bdy treaded star headed screws having minimum frame density of 780kg/cbm & an ISO 9001-2015 Certified company having good screw holding capacity (Screw Withdrawal strength of (Min 990 N) Minimum Compressive Strength of 58 N/mm2 Modulus of elasticity 900N/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, Water/Moisture Proof & Fire reterdant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-in-Charge. Material test certificate and authentification should be compulsory provided by the manufacturing company.

Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.

Supply and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complite with frame, shutters and all fitting and fixtures.

Supplyinh,fitting and fixing of openable UPVC doors with door frame of approved make with 6 mm thick glass of approved quality complete with frame ,shutters and all fitting and fixtures

Supplying, fitting and fixing of vitrified tiles in floors, treads or steps and landing on 25 mm thick bed of cement mortar (1:4) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing and polishing etc. complete including cost, conveyance, taxes, Cess & royalities of all materials, labour with T&P complete in all respect in as per specification and direction of Engineer-in-Charge.

Supplying fitting, fixing of Vetfified tile in Dado of approved make on 12 mm of thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials with all labour, T&P etc complete in all respects and as per direction of Engineer-in-Charge.Ground Floor

Supplying, fitting and fixing Granite Tile (0.1 to 0.4 sqm) in floors Trades of steps & Landing with C.M.(1:1) with pigment to match the shades of the tile including cost of all materials, taxes, labour, cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge

Supplying, fitting and fixing Chequred Tile (0.1 to 0.4 sqm) in floors Trades of steps & Landing with C.M.(1:1) with pigment to match the shades of the tile including cost of all materials, taxes, labour, cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge

Painting 2 (two) coats with any approved weather coat over a coat of primer with brush to out wall surface after scraping & cleaning the surface including cost of paint, with cost, conveyance and cess, taxes of all materials and labour with T&P required for the work etc. complete in as per specification and direction of Engineer-in-Charge.

Painting two coats with plastic emulsion paint to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Compound wall : Earth work in excavation of foundation in all kinds of soil including stoney earth and gravels mixed with stone boulders (except sheet rock & boulders requiring blasting) with all leads and lifts including dressing and levelling the bed and depositing the excavated materials at places away from work site with all leads including cost of all labour T&P required for the work etc complete and as per the direction of the Engineer in charge.

Supplying and filling in foundation and plinth with sand excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

Fly Ash Brick masonry in C.M. (1:6) using 9" size in Super structure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.

R.C.C. work of proportion M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using 20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge. Column base.

Column

Plinth Bend

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all materials & T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

Painting 2 (two) coats with any approved weather coat over a coat of primer with brush to out wall surface after scraping & cleaning the surface including cost of paint, with cost, conveyance and cess, taxes of all materials and labour with T&P required for the work etc. complete in as per specification and direction of Engineer-in-Charge.

INR Fifty Seven Thousands Twelve and Paise Thirty One Only

Supplying and filling in foundation and plinth with sand excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

INR One Lakh Seventeen Thousands Eight Hundred Four and Paise Forty Seven Only

INR Two Lakh Nine Thousand Forty Three and Paise Forty Five Only

INR Two Lakh Fifty Five Thousands Five Hundred Twenty Eight Only

INR Fifty One Thousands One Hundred Sixty Four and Paise Twenty Eight Only

INR One Lakh Twelve Thousands Four Hundred Thirty Nine and Paise Fifty Two Only

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.

INR One Lakh Fifty Three Thousands Seven Hundred Sixty One and Paise Fifty Seven Only

INR Thirteen Thousands One Hundred Fifty Six Only

INR Twenty Eight Thousands Seven Hundred Ten Only

INR Forty Three Thousands Seven Hundred Fifteen Only

INR Three Thousand Two Hundred Seventy Only

INR Three Thousand Five Hundred Forty Only

INR Two Thousand Seven Hundred Fifty Five Only

INR Three Thousand Four Hundred Thirty Five Only

INR Thirteen Thousands Six Hundred Fifty Only

INR Sixteen Thousands One Hundred Ninety Only

INR Four Thousand Nine Hundred Seventy Only

INR Forty Five Thousands Eight Hundred Twenty Only

INR Thirty Six Thousands One Hundred Twenty Only

INR Thirty Thousands Two Hundred Forty Only

INR Forty One Thousands Six Hundred Ten Only

INR Thirty Three Thousands Six Hundred Only

INR Five Hundred Thirty Six Only

INR Thirty One Thousands Eight Hundred Sixty Two Only

INR Five Hundred Fifty Only

INR Thirteen Thousands Four Hundred Sixteen Only

INR One Thousand Nine Hundred Forty Eight Only

(Supreme/Ashirvad/Oriplast) 20mm dia C-PVC Pipes In ground floor

25mm dia C-PVC Pipes

40mm dia PVC ASTM Pipes

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In Ground floor

Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground floor

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock(CON-CHR-041KN)

15mm dia CP angle stop cock(CON-CHR-053KN)

15mm dia CP L.B.Bib cock(CON-CHR-107KN)

15mm dia CP flange

15mm Cp extention piece

25mm dia C-PVC ball valve.(Ashrivad make)

15mm dia C.P Pillar cock(CON-CHR-021KN)

125mmdia C.P.grating

15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)

INR Six Thousand Two Hundred One and Paise Twenty Nine Only

CP towel rail (25 mm)(ACN-CHR-1111N)

C.P towel ring(ACN-CHR-1121NMI)

Soap dispensing with glass bottle(ACN-CHR-1137N)

Corner Glass Shelf with Bracket)(ACN-CHR-1173 )

CP Soap dish Holder (ACN-CHR-1131N)

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern (Slimline-white)

Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. (Supreme/Ashirvad/Oriplast) 2000litre capacity water storage tanks (3 layer)(Ist Floor)

Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 110mm dia U-PVC SWR pipes (Supreme/Ashirvad/Oriplast)

110mm U-PVC door Tee

110mm U-PVC plain Tee

110mm U-PVC door bend

110mm U-PVC plain bend

110mm dia U-PVC off set

110mm dia U-PVC 'P' trap

110mm dia U-PVC cowl

110mm dia U-PVC clamp

50mm dia UPVC class-IV pipes

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall

a.Cascade dual flushset (Hindware)No.92099

Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral P or S trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with S trap plain (Parryware/Hind ware/Cera/Kerovit/Somany)

Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered Hot and Cold with long screws, sh

INR Twenty Three Thousands One Hundred Fifty One and Paise Thirty Only

INR Four Thousand Nine Hundred Eighty Eight and Paise Ten Only

INR One Thousand Eight Hundred Thirty Nine and Paise Thirty Three Only

INR Seven Thousand Two Hundred Thirteen and Paise Ten Two Only

INR Eleven Thousands Three Hundred Sixty and Paise Twenty Only

INR Fourteen Thousands Seven Hundred Fifty Four and Paise Twenty Four Only

INR Sixty Eight Thousands Thirty Four and Paise Sixty Five Only

INR Seventy Six Thousands One Hundred Forty Four and Paise Forty Two Only

INR Five Thousand Ten Only

INR Five Thousand One Hundred Thirty Seven and Paise Twenty Only

INR Sixty Two Thousands Eight Hundred Fifty Nine Only

INR Twenty Thousands Three Hundred Eighty Four Only

INR Fifty One Thousands Three Hundred Thirty Seven and Paise Twenty Only

INR Forty Seven Thousands Eight Hundred Thirty Six and Paise Eighty Only

INR Twenty Three Thousands One Hundred Fifty One and Paise Thirty Only

Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.