Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.5 L+₹521 (0.02%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest bid | |
| 3 | L3₹25.0 L+₹2.4 L (10.8%)Rejected-Finance | L3 | Rejected-Finance Being other than lowest bid | |
| 4 | L4₹25.4 L+₹2.9 L (12.9%)Rejected-Finance B1 DAYA NAGAR SHAMSHABAD ROAD RAJPUR CHUNGI AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Being other than lowest bid | |
| 5 | L5₹25.9 L+₹3.4 L (15.1%)Rejected-Finance V P O JAGANOO TEH DISTT UDHAMPUR J K 182124 | UDHAMPUR | JAMMU AND KASHMIR | 182124 | L5 | Rejected-Finance Being other than lowest bid |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
15 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
Garrison Engineer (North) Udhampur PIN-901220 C/o 56 APO
GE/U(N)-16/2024-25 REPAIR/ MAINT TO DRAIN, GATE, PAVED AREA AND CONNECTED ITEMS FOR OTM AND MD ACCN AT OLD CH AREA AND ADJOINING AREA UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR
2024_MES_652449_1
GE/U(N)-16/2024-25
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer the tender documents
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹80,000
Yes
13 Sept 2024
6 May 2024
17 Jun 2024
6 May 2024
15 Jun 2024
20 May 2024
Amount
Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed.
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises outside MD land without extra charge of Govt. complete all as specified and directed by Engineer in charge.
M&L for Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-in-charge.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed by Engr-in-charge.
M&L for dismantling/ demolition of wrought iron/ mild steel / steel works of any description and in any position, complete all as specified and as directed by Engr-in-charge.
Demolition Stone slabs and tiles laid dry or dry bedded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer in charge.
Dismantling wall/ceiling board, fibre pulp insulation etc or insulation boards/slabs/blanks of any description, any thickness including cover fillets as directed by Engr-in-charge.
M&L for Walling of random rubble masonry, un-coursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified.
M&L for Walling of random rubble masonry (Except Stone), un-coursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified. Note: Serviceable quantity of stone obtained from srl item no 5 above shall be reused under this item.
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 metre mean radius, using old size bricks, built in cement mortar 1:6 , complete all as specified and as directed. .
All as per item No. 7 herein before, but except bricks.Note-Old bricks obtained against dismantling shall be used.
M&L flush pointing to random rubble masonry un-coursed or brought upto courses in cm 1:4 including raking out of joints in repair work complete all as specified and directed.
M&L for Raised pointing to random or polygonal rubble, un-coursed or brought upto courses in CM1:4 all as specified and as directed.
M&L 15 mm thick rendering CM 1:4 on faces of brick work or stone surface concrete surface including finished even and fair all as specified and as directed.
M&L for Framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290-0 or Fe-310-0, incl portions framed and hung as gates, pintle hinges, stops, hand-made sliding bolts etc. complete all as specified.
M&L for Chequered tiles 300x300x25mm thick coloured with grey cement & admixtures laid over 15mm thick cement mortar 1:4 set, jointed and pointed in neat cement slurry in floors, complete all as specified and as directed.
S & F for 5mm thick insulated PVC Wall Lining honeycombed as per sample kept in GE office consisting of PVC Insulated Panels with approved colour and design printed PVC sheet used colour PVC sheet duly fitted into the wall including PVC sheet in strips feathered at the edges including removing and re-fixing electric switch boards & plates and covered with PVC stripes or beading after fixing wall paneling as per specifications Complete all as specified.
M&L for machine cut kota stone slab flooring laying as in desired pattern 20-25 mm thick laid over cement screed base 20mm thick in CM(1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto 10mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.
Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge.
Preparation of plastered or un-plastered old surfaces of walls, chajja, balcony, facial etc by brooming down or steel wire brushing, scraping down smoke shoots, moulds, moss efflorescent stalls, treating oil and greasy spots etc, and applying one coat of cement base paint, complete all as specified .
M&L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified.
M&L for cement concrete type B2 1:2:4 (40mm graded aggregate) in surface channels and drains complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 using 20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finish complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as specified and directed.
M&L preparing painting on sreel surfaces of any description over 10cm in width or girth, on new surface over a coat of red oxide zin primer and two coat of synthetic enameled paint over it, complete all as specified and directed.
M&L for Machine pressed rubber moulded manufactured/compacted by vibrating table method pre-cast concrete interlocking paver block Laquor finish any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.
M&L for Cement concrete 100mm thick type B-1, 1:2:4 (20mm graded aggregate) as in floor, complete all as specified and directed.
M&L Cement concrete 100mm thick type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor, complete all as specified and directed.
Pre-cast cement concrete block type B-1 (1:2:4) 20mm graded aggregate as in kerb stone set in cement mortar 1:4 masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed.
M&L for 450 mm dia Reinforced concrete pipes class NP2, laid and jointed completed with collar complete all as specified.
M&L for 300 mm dia Reinforced concrete pipes class NP2, laid and jointed completed with collar complete all as specified.
M&L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. Including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.
S&F Pre-painted coloured corrugated profiled Galvalume / aluminum Zinc sheet with min 0.50mm TCT with BTM of 0.45mm thick conforming to IS -513 (AZ-150 GSM, Al Zn alloy metallic coating 550 MPA yield stress as per AS-1397), as in roof covering/cladding to wall fixed with self taping screws, colour/exterior coat of silicon modified polyester/ BHP x RW paint system 20 micron top coat applied over 5 micron primer and a micron polyester back coat applied over 5 micron primer, all fixed with galvanised self drilling self tapping fastener(12-14x55 with EPDM seals), complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ ridge/valley gutter/ facia of bldg/ fixed with self tapping screws/ J hooks/ suitable arrangements as per situation/requirement all as specified and as directed.
M/S GURU DEV BUILDERS
M/s AKHIL SHARMA
MAHAJAN TRADING CO
HANS RAJ SHARMA
Bansal and Sons
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .