RequiredExperience with Government
RequiredAnnual Turnover Bid to RA enabled Yes FRP Rigid Inflatable Boat With OBM 4.7 M ( 6 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Nomenclature of Rigid Inflatable Boat 4.7 meter RIB with 40 HP OBM Normal Capacity 2 crew + 6 Men 4.7 meter RIB with 40 HP OBM Normal Capacity 2 crew + 6 Men Functions performed The Rigid inflatable boat shall perform the following tasks :- (a) * 1/14 Search & Rescue during floods (b) Transport men and material Confirmity to Standards As per ISO 6185-3 Yes
Requiredfor 4.7 M Rigid Inflated Boat (RIB) * Confirmity to Standards for Boat Hull Design Accordance with IRS Classification Society Rules and Norms issued YES * Constructional Overall length of Rigid Inflated Boat (in meter) 4.7 ± 0.05 * Beam(Extreme) including collar (in meter) 2.1 ± 0.03 * Hull Beam Overall (excluding collar) (in meter) 1.56 ± 0.02 * Maximum Draught including appendages 0.35 m for Hull and 0.45 m at OBM * Weight of Boat suitable for 8 persons
RequiredMax 1060 * Total Inflatable Chambers 5 * Diameter of Collar tube
RequiredMin 480 * Hull Construction Material as per IRS Class Approved Rigid fibre glass Hull with foam filled buoyancy compartments to give positive buoyancy even in the event of complete deflation material used as approved by IRS. * Deck material GRP coated marine plywood with non slip finish
RequiredMarine Plywood
RequiredFastners made of Stainless or Brass * Collar Type Heavy duty Inflatable Collar made with Hypalone as per ISO 15372. The collar shall be attached to the hull using Primary and secondary securing arrangement. The primary arrangement * 2/14 should ensure rigid connection of the inflatable collar to the hull and ensure water tightness between the collar and hull. However the arrangement should be such that the collar can be disconnected when required for necessary repairs. Secondary arrangement of securing collar to the boat should be of suitable number of polyester webbing reinforced straps on to the hull. Textile Support in Collar Made of 10 X 10 count High Density Polyester Decitex Yarn * Coating in Collar Inside with Polychloroprene
RequiredOutside with Hypalon * Weight of Collar Tube Composite (in g/m²) 1500 * Collar Chambers 5 separate chambers * Seat One piece straddle seat with console made of GRP for Two persons with storage space for Battery.The Upholestered seatis hinged giving access to the Locker below
Requiredand hasp for locking * Console A watertight control console for the operation of coxswain shall be mounted on the centre line. All OBM controls
Requirednavigation and common instruments shall be mounted on the console. Equiped withSteering Wheel and Remote single lever controls
Requiredand to accommodate aditional equipments as per buyers choice. A locker space shall be provided * 3/14 under the console with weatherproof inspection hatches. A navigational compass of reputed make shall be fitted on top of the console in a suitable position for the coxswain use. Additionally
Requireda watertight ‘Battery Compartment’ shall be made
Requiredif batteries cannot be housed inside command console. Grab Handle made of Stainless Steel infront of console and behind the seat YES * Inflatable Mechanism of Collar Foot Pump as well as Electric Pump (12 V DC) * The Air Tuber ( Chambers)
Requiredmust made from Hyplon with 1670 Denier YES * The Fabric must be as per ISO-15732 YES * Plastic Coated Transom to form waterproof Cocoon as per ISO 6185-3 YES * Overlapping of seam of Boat Quadruple * 5/8" Grab line for safety Yes * Weight of Boat 550 * Type of Air Valve One way Type Confirming to International Standards like C7 or equivalent * Make of OutBoard Motor Engine (OBM)
RequiredOBM manufacturer should have established product support throughout India Mercury Mercury
RequiredHonda
RequiredYamaha
RequiredSuzuki
RequiredMariner
RequiredTohatsu
RequiredEvinrude OBM Fuel Tank Capacity(As per endurance + 25 % 85 * 4/14 reserve) OBM Fuel Type Petrol * No of Strokes 4 * No of Cylinders 4 4 Power HP 40 * Engine Starting Electric Start with dual Redundancy starting system with cross connection * Engine Stopping Deadman switch * Types of Fuel System EFI EFI Engine Cooling System Watercooled with Thermostat * Engine Lubrication Wet Sump with Pressure * Through Prop Hub Exhaust YES * Trim System Power trim Type from coxwain position * Engine OBS 1 Engine oil filter - 03 nos. 2 Fuel Filter - 06 nos. 3 Air Filter - 02 nos. 4 Fuel line with priming valve and connectors – 01 no. 5 Propeller - 01 No. 6 Spark plug - 03 nos. 7 Spark plug wrench -01 no. 8 Water pump repair kit – 01 set 9 Water pump impeller – 01 no. 10 Gear oil drawn screw washer – 06 nos. 11 Lubrication oil drain plug washer – 02 nos. 13 Throttle & Gear shift cable – 01 set 12 Fuses of all system complete - 02 set 1.13 Throttle & Gear shift cable – 01 set 14 Steering Cable – 01 set 15 Automatic Voltage Regulator (AVR)- 01 no. 16 Fuel water separator – 01 no. * Fuel System The engine shall draw fuel from fixed fuel * 5/14 tank of sufficient capacity to meet the endurance requirements specified in this specification. The fuel tank shall be constructed of Stainless Steel (AISI 316) and of the size to meet the specified endurance. The tank shall be fitted beneath the deck. The tank shall be provided with cover plate for cleaning. A calibrated dipstick shall also be provided which shall be stowed on top of this tank. Fuel water separator to be provided between fuel tank & OBM. Type of Steering System The steering shall be from the helmsman position actuated by rim type wheel mounted at 45 degree to the vertical and transmitted by OEM suppiled system to OBM Unit at the transom. Arrangement for direct tiller control should also be provided. * Type of Bilge System A semi-rotary hand pump of 1000 litres per hour capacity shall be provided in the aft end. The pump shall be of reputed make capable of taking suction from the bilge sump aft. * Length of Engine Shaft (To suit transom height) 43 * The Engine and drive line shall be fitted in enclosed housing to protect from water ingress YES * Colour of the Boat Orange * 2 paddle for YES * 6/14 Emergency Rowing Two Stainless Steel "D " Rings for Towing YES * Standard tools (One set each) shall be provided in addition to special tools recommended by OEMs for OBM in a suitable portable aluminum tool box (a) Open Spanner : 10X12
Required13X17
Required14X15
Required19X22 (b) Socket : 13X12.5
Required15X12.5
Required17X12.5
Required19 X12.5
Required22 X12.5
Required24 X12.5
Required27 X12.5
Required(c) T Handle : (One in no.) (d) Extension for socket : 12.5 X12.5 (e) Screw Driver : A.0 8X5.5X1.25 (f) Feeder gauge : 0.2X0.45 (g) Box spanner : One set. (h) Torque spanners : One set. * Power supply and charging system Through 12V Sealed SMF batteries of Min. 100 AH to be provided to cater for total electrical load for three hours on board with battery charger * Nos of batteries 2 * Battery charging socket of IP66 rating mounted on console for charging the batteries YES * Search Light fitted on boat as per LSA code compatible with the standard electrical supply available in the boat YES * IP Rating for all Electrical Fitting Switches IP66 IP66 Electric Horn Fitted on Console YES * The anchor shall be connected to 27 m long 16/20 mm dia nylon rope
Requiredstowed on special hinged horns YES * Four removable Rescue Patch of 20 x 40 cm made of retro reflecting tape YES * 7/14 Mast and Navigation Lights Yes- A mast–head light and a combined sidelights for Port and starboard of relevant IP standards shall be mounted on a Goal Post Mast (SS 316) fitted at an appropriate location. A stern light shall be fitted as far aft as possible. * Mandatory Fittment on Collar including Rubbing Stake of Vinyl urethane/EPDM/Neopre ne of 8 inch wide (203mm) with raised ribs
RequiredD rings for life line
RequiredAnti SKid Coating etc as per standards YES * Additional Fittment on Collar 2 paddle blade Pocket
Required1 drought type Fair Lead SS 316
Required2 rope Stowage pocket
Required4 securing Rings
Required1 bow Rings SS 316; 2 Fairleads/cleats near transom (stbd& port) SS 316; Twelve molded handholds shall be bonded to the upper surfaces of the collar. Etc. * Additional Fittment OBS (i) Inflation/Deflation Valves - 5 Nos (ii) Pressure guage - 01 No (iii) Electric Inflation pump - 01 No (iv) Inflation Foot Pump (Reputed make) - 02 Nos (v) Patching material with adhesive to repair leak/damage in Patching material with adhesive- to repair damage/leak in buoyancy tube. - 01 no. * Life saving Equipments in a wooden Box Carrying First Aid Kits
RequiredOne Aldi's Lamp One Throwing Quoits with Buyont Line
RequiredDistress Signal Box YES * 8/14 Lifting Arrangement The boat shall be fitted with suitable four point lifting arrangement. A four leg polyester webbing sling to be supplied along with the boat. The sling is to be shackled to these slinging points by bow screw shackles. The bolts of these shackles shall be moused to prevent them working loose. The sling shall have a safe working load of 1.5 tonnes. The sling is designed to place the RIB horizontally in the water. The builder should provide load test certificate for the sling set to twice the Safe Working Load. * Strong Points for towing
RequiredAnchoring
Requiredmooring as per ISO15084 YES * Cradle Yes- one PERSONNEL RETRIEVAL SYSTEM & One Cradle of suitable size for the stowage of boat to be supplied * Avaialbility of Drawing as per Indian Register Shiping(IRS) YES * Instruction Manual cum boat hand book & OBM service manual alongwith part catalogue YES * Product support All the major equipment and machinery fitted onboard should have indigenous product support ability by the OEM or its authorized reps for a minimum period of 12 years from the date of supply of the boat. The certificate of the same from the OEM shall be * 9/14 attached. Numbers of Life jackets 8 * Numbers of Life Buoys 2 * Equipments and Accessories ANCHOR
RequiredCQR
Required9 KG Positioned at foredeck chock with 27 m of Anchor Rope & Shackle with stowage 1 * Paddles Positioned on the tube sides 2 * Boat Hook positioned under side deck 1 * Mooring Warps positioned at pockets on tube 2 * Hand Bilge Pump 1000 lts/hr capacity 1 * Foot Pump 1 * OBM protective plate positioned on transom 1 * Tool Kit For Engine 1 * Fitments of Towing Eye at Through stem 1 * Fitment of Mooring Post cleat at Fordeck 1 * Fitment of Mooring Towing/Slinge Cleats at Transom 2 * Fitment of Fairleads/Cleats at Transom 2 * Fitment of Drainage ports at Transom 2 * Fitment of anchor Chocks at Foredeck 1 * Fitment of Identification Plates at Consol 1 * Fitment of sheet grab rail on console sheet 1 * Fitment of grab handle at front of the console 1 * Fitment of Bollard at Bow Section 1 * Calibrated fuel tank dipstick 1 * 10/14 Fuel filler cap with key 1 * Lifting eye plates 1 Set * Four point lifting slings 1 Set * Battery Charger 1 * Instrument panel spray cover – PVC/Celluloid 1 * Tallies 1 Set * Watertight plug and socket (NUC) and special Ops light 2 * Collar repair kit 1 * Portable search light 1 * Electric horn 1 * Maintenance free sealed batteries
Required12V
Required100AH 1 * Canvas cover for the boat 1 * FRP repair kit 1 * Life saving/Rescue kits as mentioned Yes * Tools and Tool Box as mentioned Yes * Fittements of Wind screen Frame on console 1 * All Metal fittings shall be of SS 316 Grade Yes * Performance Normal Capacity 2 crew + 6 Men 2 crew + 6 Men Minimum Speed lightship with 2 crew (in Knots) 15 15 Top Speed with 6 men & 2 Crew (in knots) 6 6 Operating Sea State 2 2 Boat must provide Suffucient Buyoncy that it does not sink and satisfactorly clear swamp test Yes * Economical Speed under Full Load Condiotion (in Knots) 6 * Endurance at Top 8 * 11/14 Speed and at full load condition Operating Conditions Suitable for Continuous Operation up to 50 deg cel
Requiredrelative humidity of 95 % at 35 deg cel and roll of 25 deg cel and pitch of 8 degree * Test & trials Yes- A programme of tests and trials as per IRS Class requirements shall be prepared by the Builder. On satisfactory completion of the trials
Requireddetailed reports in bound copy shall be forwarded by the Builder to customer for every boat separately. * Certification Availability of approved Drwaing from IRS/any other Govt of India (DG Shipping) approved agency Yes * Availability of Test Report including Environmental test as per ISO 6185-3 latest amndmt from IRS/any other Govt of India (DG Shipping) approved agency to prove confirmity to specification Yes * Test Report No - * Test Report Date - * Name of the Lab - * Address of the Lab - * Warranty in Years 1 1.0 * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
