Special repair of CHC Padmapur such as compound wall, painting, flooring and MS gate fitting during 2025-26

Removing Old lime or cement plaster including raking out joints 12mm deep and removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling & Removing RCC Chajja, Shelve, Fins including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling & removing Brick / Stone Masonry in C.M./L.M. upto 3.0m height including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour T&P etc. complete as directed by the Engineer in charge.

Scarping old paint with scrapers, sand papering & washing with soap water or soda including scaffolding charges up to 5m height including cost of all labour T&P,Cess etc. complete as directed by the Engineer in charge.

Earth work in foundation in hard soil or gravelly soil within 50m intial lead and lifts 1.5 M intial lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge.

Supplying and filling in foundation and plinth with sand, laying in layers, well watered and rammed including cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials, cost of all labour and T&P etc. complete in all respect as per direction by the Engineer in charge.

Providing and laying PCC (1:3:6) in foundation and floors using 4cm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

Providing and laying PCC / in all floors using 12mm size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

R.C.C. work of M.20 in Chajja using 20 mm & down graded size crushed stone granite aggregates including hoisting lowering, laying concrete and compacting by using vibrators, watering, curing and necessary centring & shuttering for smoth finishing of work excluding steel reinforcement work including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge.

RCC work of M-20 grade in drain slab using 20mm and down graded size crushed stone granite aggregates including laying in layers, ramming, watering and curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials and cost of all labours, T&P etc complete as per the direction of the Engineer -in –charge. Drain Slab.

Fly ash brick masonry in all floors with cement mortar (1:6) using bricks of 23cm size, after immersing Bricks before use with watering, curing etc. complete including cost, conveyance, royalties, EMF,DMF and aditinal charges of all materials, cost of all labour, all T&P etc. complete in all respect as directed by the Engineer-in-charge.

Providing 12 mm thick C.P. with C.M. (1:6) on outside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Providing 16 mm thick C.P. with C.M. (1:6) on inside surface of wall with screened and washed sharp sand for mortar and finished smooth including watering and curing with cost, conveyance, royalties and EMF,DMF and aditinal charges of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

Painting two coats with approved weather seal paints of approved colour, shade on wall surface over a coat of wall primer including sand papering, polishing the surface, cost, conveyances, EMF,DMF and aditinal charges of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Providing fitting, fixing of Aluminium Door with OEL anodized Al. door section of 9202 as vertical member, 9200 as top and bottom member. 9232 as middle member 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 with Automatic Door closure, 6 Lever MORTICE Lock, Door Stopper, Handle etc. including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete as per direction of Engineer-in-charge.

Painting two coats with distemper to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Factory made FRP Door / Window frame (alternately called GRP) of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gel coat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. The finish of door frame will be plain and different colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge.

Factory made single leaf rigid FRP sandwich composite door / window shutter (alternately called GRP) of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone (EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The finish of door shutter will be plain colour as per specification and direction of the Engineer in charge.

Painting two coats with approved enamel paints of approved colour, shade Iron / work including sand papering, polishing the surface, cost, conveyances, EMF,DMF and aditinal charges of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge.

Supplying, fitting, fixing of all types of MS Door / Gates made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and EMF,DMF and aditinal charges of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge

Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures including cost of all labour T&P etc. complete as directed by the Engineer in charge.

Straightening cutting, bending & binding of bent up or coiled rods confirming to I.S. 432 for Plain and 1785 for Tor steel and binding, tying the grills, hoisting, lowering and placing in proper position including cost, conveyance and EMF,DMF and aditinal charges of all materials and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer- in-Charge.

Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in floors over 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Supplying, fitting, fixing of Vitrified tiles (60cm x 60cm: colour) in dadoo in all floors over 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost, conveyance and EMF,DMF and aditinal charges of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge.

Please Enable Macros to View BoQ information