PROVISION OF CERTAINS REVENUE WORK MINOR WORK AND SPECIAL REPAIRS IN THE AOR OF AGE BRI BRII EMI EII UNDER GE 865 EWS

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding (but including backing ) , rubbish off the premisescomplete all as specified and directed by engr-in-Charge.

Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded stone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed.

M&L for Glazed ceramic white tiles in vertical surface 450x350x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match (Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) incl 10mm thck screed bed below tile for dado/skirting CM 1:4.

M & L for Non-Skid Ceramic tiles 7 to 8 mm thick (Square/rectangular ) area of each tile exc 0.06 Sq.m but not exc 0.11 sq m in floors etc set and jointed in 15mm thk in CM 1:6 with neat cement slury and pointed in white or coloured cement match.

M&L for Vitrified tiles 10 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement and jointed in 15mm thk cement slurry and pointed in white cement to match complete all as specified and directed.

M& L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as specified and directed by engr-in-charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as directed by Engr-in-charge.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each complete all as directed by Engr-in-charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-in-Charge.

M&L for plain sheet glass 4.00mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane including hacking outcomplete all as specified and as directed by Engr-in-Charge.

S&F in repair Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of up to 700 mm in width and weight not more than 35 Kg and fixed complete all as specified and directed.

M&L for factory made brown colour solid WPC (wood particle composite) door frame of size 100 mm 63 mm single rebate 100% lead free made from single extruded process material with density 0.78 Kg/RM complete all as specified and directed.

S& F in repair and fixing 30 mm factory made solid WPC (wood particle composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600Kg/Cum shiuld be 100% lead free door complete all as specified and directed. Make ECHON cat No. LPD-11 or equivalant

S&F IInd class soft wood as in plian solid straight chowkhats wrought framed rebated on the solid put together on with glue pinned at joints

S & F 30mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F 30 mm thick 2nd class softwood,glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F in repairs only 200mm long aluminium anodised barrel tower bolt of extruded section in old or new position

S&F in repairs 150mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs aluminum door handle cast type 150 mm in old or new position

S&F 100mm long mild steel medium weight but hinges cold rolled.

Taking down cement plaster on brick/pcc block or conc surfaces including racking out joints hacking for key, scrubbing down with water etc.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed (Note: WPC will be measured and paid seperately).

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and directed (Note: WPC will be measured and paid seperately).

M&L for Preparing newly plastered surfaces of walls and applying two coats of acrylic emulsion paint over a coat of primer and over a coat of wall care putty applied till the surface is smooth etc complete all as specified and as directed.

M&L for Preparing old treated/untreated plastered surfaces of walls and applying two coats of distemper oil emulsion,over over a coat of wall care putty applied till the surface is smooth including complete removal of existing treatment of any description etc complete all as specified and as directed.

Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern .

S&F 0.63 mm thick galvanised mild steel sheets with two corrugation side lap fixed with J or L hooks with grade of zink coating 275

S&F rolled section as in main and cross beams ,hip and jack rafters , purelins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe -410 Gde E-250 Quality A

Dismantling structural steel work including doors and gates of any description.

M&L for two coat of synthetic enamel paint on new /previous untreated corrugated steel surface including prepation over a coat of red oxide zinc chrome primer with modrant solution complete all as specified and directed .

S& F 1000 ltr capacity rotational moulded polythelene water storage tanks triple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position including dismantling all as specified in SSR Part 1 complete all as specified and directed .

Dismantling of water tank of any description capacity exc 500 ltr and not exc 1000 ltr complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 25mm to 32 mm bore including cleaning for refixing or removal to store. complete all as specified.

S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified.

Dismantling of 75 / 110mm bore cast iron ,PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia

S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors.

S&f 75mm bore PVC (SWR) pipe bends any radius

S&F PVC (SWR) 110mm bore bends any radius, complete all as specified

S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal

M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement

S&F PVC (SWR) 75mm bore vent cowl complete all as specified

S&F PVC (SWR) 'S' trap 125/110mm bore for EWC/IWC

S&F in repair single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size 370x690x795mm Make: jaquar Cat No. KUSWHT-358515N or equivalant complete all as specified and directed.

S&F in repairs for viterous china wash hand basin flat back size 600x480mm excluding traps, waste , chain , plug and porcelain stopper incl brackets,complete all as specified.

S&F in repairs 20mm bore stop cock fancy type chromium plated cast copper alloy screw down under high pressure with crutch or butter fly handle screwed both ends for iron pipe or brass ferrule.

S&F wash hand basin table top type fixed on granite top grooving and cutting if required complete all as specified and directed Make: Jaquar cat No SLS WHT-6011 or equivalent

S&F in repair pillar tap single lever long body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. Make Jaquar Cat No. ARI 39005B or equivalent

S&F in repair hand shower ( health faucet ) CP with 8 mm dia. 1.2 Metre long flexible tube and wall hook complete all a specified and directed. (Make : Jaquar Cat No. ALD-573 or equivalent)

S&F in repair chromium plated paper holder fixed on walls complete all as specified and directed. (Make: Jaquar Cat No: AKP-CHR-35753P or equivalent).

S&F in repair angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. (Make: Jaquar Cat No: ARI-39053 or equivalent).

S&F in repair chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed (Make: Jaquar Cat No: ARI-39037 or equivalent).

S&F in repair glass shelf corner fixed on walls with screws complete all as specified and directed (Make: Jaquar Cat No: ACN-1173 or equivalent).

S&F in repair towel rack chromium plated brass fixed to walls with screws complete all as specified and directed. (Make: Jaquar Cat No. AKP-35781PS or equivalent).

S&F in repair CP brass towel ring fixed with and incl CP brass screws and complete all a specified and directed (Make: Jaquar Cat No: AQN-7721 or equivalent).

S&F repair Soap dish fixed with and incl CP brass screws complete all a specified and directed (Make: Jaquar Cat No: AKN-35731P or equivalent).

S&F repair chromimum plated brass 32 mm coupling for table top wash hand basin half or full thread fixed complete all as specified and directed. (Make: Jaquar Cat No. ALD-725 or equivalent).

S&F in repairs PVC connections 15mm size with CP nuts of length 600mm complete all a specified and directed. (Make: Jaquar Cat No. ALD-8058 or equivalent).

S&F in repairs Harrision rails, anodised alloy, with fixing end brackets, stops, dooms etc complete set fixed on wall or wall pannels complete all as specified and directed by Engr-in-Charge.

S&F Grating doom 125 mm with waste hole of PTMT

S&F in repairs PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified.

Demolition brick work / block masonry or stone/ boulder masonry, built in built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for precast cement concrete block masonary type C-1 (1:3:6) , using crushed stone 20mm graded aggregate ,set and jointed in cement martar 1:6

S&F in repairs Sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, complete all as specified.

S&F 25 in repairs PP-R Gate Valves (brass insert) conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 20mm bore, complete all as specified.

S&F18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws as in modular kitchen cabinets/cupboards including lipping portion match with laminated colour complete all as specified and directed.

S&F in repairs 100mm long extruded brass handles, fabricated type polished complete all as specified and directed by Engr-in-Charge.

S&F in repairs 30mm width of flaps(when open) continous (piano) hinges, brass complete all as specified and directed.

S&F magnetic catcher with 8mm dia ball and brass body and stricking plate complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded amd painted in any mortar et complete all as specified dicrect by Engr -In- Charge .

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black, complete all as specified

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members.

M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board interior grade , prelaminated one side with decorated choice lamination and other side balancing white fixed with screws/nails to timber frame work as in wall pannelling,complete all as specified

M&L for 2nd class softwood clean sawn as in scantling fixed with nails exceeding 13 Sqcm and n.exc 25 Sqcm in section

Demolition of Reinforcement cement concrete in any description and any position not otherwise specifically provided for.

M&L for precast cement concrete Type B1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.

M & L for 75 mm PCC 1:2:4 type B-1 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection

M&L for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation.

M&L for 10mm thick rendering on other than fair faces of Stone wall works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and as directed

M&L for 15 mm thick rendering on other thsn faces of stone masonry works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika

M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.

M & L for two coat of cement base paint on newly plastered surfaces including preparation of surfaces, complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applying two coat of white wash complete all as specified and as directed.

S&F mild steel work as in hold fasts and similar work confirming to Fe-290 or Gd -E 165 complete.all as specified and as directed by the Engr-in-Chage

Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast , bed block and like complete all as specified and as directed by the Engr-in-Charge.

S&F for 35mm thick 2nd class hard wood plain framed factory made paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as directed by Engr-in-charge.

S&F for 30mm thick 2nd class hard wood plain framed factory made glazed and skeletion window / ventilators shutters , open rebated and prepared to receive glass , gauze etc (without sash bars) edges of framing plain , chamfered or rounded fitted with cut and mitred beds for securing glass etc size of members of shutters as specified in SSR part I, Section 8 , clause 8.24(a) supplied and fitted to chowkats , complete all as directed by Engr-in-charge.

M&L for preperation of new or previously untreated wooden surface any description of any description over 10cm in width or girth and applaying two coat of synthetic enamal paint over a coat of Pink primer complete all as specified and as directed complete all as specified and as directed.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

S&F100mm long mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized complete.

S&F 75mm long aluminium anodized, butt hinges of extruded section complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in sub base of floor complete all as directed by Engr-in-charge.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.11Sqm and nexc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match the screed bed with CM (1:6) 15mm thick laying floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles complete all as specified and directed.

S&F viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) with front or back inlet ant pattern as in repairs incl bedding with p.c.c type B-I 1:2:4 , using 20 mm graded crushed stone aggregate.

S&F in repairs flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed.

S&F in repairs 15mm dia Angle stop valves, fancy type chromium plated with lonk shank and cup cast copper alloy (concealed type), screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipes complete all as spd.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed.

M&L for PVC (SWR) pipe single socketed, 110mm soil, waste and rain water dranage pipes laid in trenches and jointed all as specified including dismantling etc

M&L for PCC 1:4:8 TYPE D-2 (40mm gradded aggergate) bed to drain pipe incl packing under and hanching against side after they are laid and tested up to 110mm dia pipe including dismentling

M&L for PVC (SWR) pipe single socketed, 75mm dia soil, waste and rain water dranage pipes fixed to walls all as specified including dismantling etc .

Dismantling water tank exc 250 & n exc 500 litre and removing to storel all as specified.

S&F rotational moulded HDPE water storage tanks 500 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48kg/Cum (cylindrical vertical type/rectantular loft type closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 litres including all accessories, complete all as specified and as directed.

S & F in repair 25 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.

Taking up or down 15 mm bore steel tubing and connections and set aside for re-use or removal to store

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge)

S & F in repairs Fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule

S&F in repairs, 15mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed by Engr-in-Charge.

M&L preparation of new untreated steel surfaces exc. 10 cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

S&F Pre painted galvalumealuminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mps as in roof covering /cladding to wall fixed with self tapping screws as specified

M&L Walling of random rubble stone masonry, uncoursed welll bonded, and solidly hearted, built in CM 1:6 all as specified and directed.

M & L for reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge

M&L form work to rough finshed edges of concreat flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exe 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to TMT bar.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and directed.

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Taking down shutter of any description exc 1.0 sqm but n exc 2.00 sqm

S & F 35mm thick 2nd class softwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S & F 35 mm thick 2nd class softwood,glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F 250 mm long aluminum door sliding door bolt incl all necessary fitting and bolts.

Hacking out old broken glasses (Any thickness, size quality, description) from wooden or steel frames fixed with putty or wooden beads.

S&F 4.8 mm thick sheet glass ordinary quality in any position and glazing with oil putty, glazing clips /beading as per site requirement n'exc 0.5 sq.m in each pane.

S&F 3mm thick glass sheet oridinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc.

S&F in repair galvanished mild steel wire cloth .56mm nominal dia of wire and average width of apperature 1.18mm and fixed with tinted tacks, or galvanised wire staples.

S&F anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixinf etc complete all as specified.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified

S&F anodised aluminium window and ventilator shutters, side hung type without sash,aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) etc. complete all as specified

M&L Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and as directed.

S&F in repair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg.

S&F brass mortice lock four levers (Harrisons) vetrical type size 100mm or above in old or new position as directed by Eng-in -incharge.

S&F Door stopper 150 mm long length of cover plate of aluminum alloy body and tongue anodised with hard drawn steel spring, fixed in floor, complete fixed in repair all as specified and directed.

Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil complete all as specified & directed.

M&L Pre -cast cement concrete block masonary with solid blocks made out of PCC 1:3:6 type C-1 (20mm graded aggregate) set in cement mortar 1:4.complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm in hard / dense soil.as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point as directed.

Supply and fix refrigerator, electric driven (single phase), capacity 236 3 star rated Digital inverter , Frost Free double door refrigerator. Model No RT28C3053S8/HL of Samsung or equivalent of LG/ Haier/ Whirlpool.

Supply and fix single phase stabilizer suitable for refrigerator capacity 300 to 600 ltr. Make V-Guard VGSD 100 or equivalent of LG/ Haier/ Whirlpool.

M&L wiring for circuit/submain wiring along with earth wire with the 2x4 sqmm+1x 4 sq mm earth wire of FR LS PVC insulated copper conductor single core cable in surface casing and caping of appropriate size complete all as directed

S&F 20 Amps switch socket combination 5 in 1 combined with PVC BOX white complete all as specified and directed by Engr in Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 35 Amp 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.

Excation over in area in hard/dense soil n exc 1.5m in deep and getting out as specified and directed.

Excation over in area in hard/dense soil exc 1.5m and n exc 3.0m in deep and getting out as specified and directed.

M &L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil as specified and directed.

M&L for PCC type B1 (1:2:4) using 20 mm graded crushed aggregate as in mass concrete as specified and directed.

S/F 110mm PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls and vent pipe as specified and directed by Engr-in-charge.

S & F PVC (SWR) 110 mm bore. Vent cowl

M & L Concrete bed in 1:3:6 type C2 (40mm graded stone agg) to drain pipe of bore 150 mm including packing under and haunching against the sides of pipe after they laid and tested;

supply only Integral waterproofing compound.

M&L for hardcore of gauge nexc 63mm , deposited , spread and levelled in layers nex 15cm thick watered and rammed to a true surface.

M&L Walling of random rubble uncoursed stone masonry, uncoursed well bonded laid dry in retaining wall abutment and similar work.

Supply only broken stone for loose filling ,of gauge 80mm to 150 mm graded.

Excavating in trenches n exc 1.5m wide and exc 1.5m in depth but not exc 3.0m for foundation and getting out in hard/dense soil complete all as specified & directed.

M & L Ductile iron pipes 100 mm bore with spigot and socket ends, centrifugally cast (spun) class K9, in any length, externally coated with metallic zinc Coating finished with bituminious paint complete all as specified of the following bore :- Excavation, earthwork and GI clamps shall be measured and paid separately)

M & L DI/ CI/ GI specials class B as per IS such as bends,tee, flange, tappers any branches cross all sockets and spigot collar caps and plug etc up to 150mm bore all as specified and as directed

S&F for GI tubing 100mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge.

M & L for run lead joint CI Spigot socket end and CI special fitting caulks, spun yarn and lead complete of sizes 150 mm dia bore all as specified and directed

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/GI pipe complete all as specified

S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 100mm nominal bore CI/GI pipe complete all as specified

S&F of cast iron sluice valve 150mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

S&F of cast iron sluice valve 100mm dia with CI drilled flanged ends class PN 1.6 confirming with IS incl stainless steel spindle and iron wheel including jointing material complete such as rubber packing rings of adequate size and requisite number of nuts bolts and washer complete all as specified and directed by Engr-in-Charge.

Cutting the existing 100/150 mm, CI/DI/GI Pipe line in position for insertion of new tees 150/100 mm dia as directed for tapping out branch connection complerte including joints, excavation and earth work. ( Note :- cost of fitting like CI Tee, CI Collar etc will be measured and seperately)

Material and labour for construction of stone masonary valve pit size 105x105x100 cm (internal dimension) built in cement mortal 1:4 incl plastering 20mm thick internally and externally in CM 1:4 PCC 1:4:8 TYPE D-2 15 Cm thick in foundation extending 10cm beyound external faces of wall around PCC flooring 1:2:4 type B-1, 40mm thick cover made out of 3.15mm thick MS round bar and locking arrangement with lock 2 keys . MS sheet cover should be painted with two caats of enamelled paint over a coat of red oxide primer all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as spd and directed.

Point wiring complete with 1.5 Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the followings:-

(a) One light/exhaust fan point controlled by one way switch

(b) One 3 pin switch socket combination 5 Amp on independent board complete all as specified and directed.

(c) One 3 pin socket out let 5 Amp on the same board with other switches complete all as specified and directed.

All as item No 179 above, but using cables 2.5 Sq mm size

All as item No 179 above, but using cables 4 Sq mm size

Supply and replacement of lamp holder insulated body with back plate.

Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply and replacement of switch Socket combination flush type 3/5 pin 5/6 Amps 230 volts complete all as directed.

Supply and replacement of Socket outlet 3 pin, 5A, flush type complete all as directed.

Supply and replacement of switch Socket combination 5 pin 5 & 15 Amps flush type.230 volts complete all as spd and directed.

Supply and replacement of Ceiling rose, surface Bakelite three terminals complete all as directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 12 Ways complete all as spd and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCCB's to be used tripple pole & neutral 415 Volt 8 Ways complete all as spd and directed.

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked complete all as spd and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 m sweep with, blades, and frame and louvers complete all as spd and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450 m sweep with, blades, and frame and louvers complete all as spd and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x4.0 sq. mm + 1x4 sq. mm earth wire complete all as spd and directed.

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire complete all as spd and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as spd and directed..

Supply and fixing LED lights fitting 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in replacement of Old U/S Lamp LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion .

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. Complete all as spd and directed.

Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed by Engr in Charge.

Replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm , complete all as specified and directed by Engr in Charge.

Taking out U/S LT UG cable for relaying/ replacement any size cable all as directed by Engr-In-Charge. Note:- Excavation and earth work shall be measured paid separately under respective item.

Supply and Laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 50sqmm, 3.5 core.

Supply and Laying in trenches or passing through pipe or fixed on surface XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 25sqmm, 3.5 core.

M& L in replacement of 40 mm GI Pipe light grade for cable protecton in road crossing and making good surface road to filling with PCC complete all as specified and directed by Engr in Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion .

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all as specified and directed by Engr-in-Charge.

Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Make-Havells /crompton/ Bajaj

Deduct Schedule of Credit of Rs (-) 73779.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/s Ranpat Dev Infrastructure pvt ltd (BID ID -3474765)