Repair/Replacement of internal rewiring and E/M Fittings/ Fixtures and allied work of Zone A and B at old Cantt Allahabad.

Amount

Taking down carefully point wiring of any type and any description / caping caping or concealed [light point, fan point or socket point] including removal of battens, conduit pipes, plug sockets, switches, sockets, ceiling rose, light fittings etc complete and making good disturbed surface to match the exisitng complete all as specified & directed.

Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type complete all as specified & directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.00mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed for following point wirings:---

One light / fan point controlled by one switch

One light point controlled by two, two way switch

One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board.

One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board.

Description same as per item No. 04 here in above but with 1100 Volts grade copper stranded conductor FRLS wiring cable two run of size 2.5 Sqmm as main wire and one run of earth wire of size 2.5 Sqmm multi-strand copper conductor cable for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn into including PVC Casing & capping medium grade not less than 20mm wide (wall thickness of casing caping 1.2mm) (ISI marked) with all fittings, fixing accessories & including provision of 1.00mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed for following point wirings:---

One light / fan point controlled by one switch

One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board.

One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board.

Description same as per item No. 6 here in above but with 1100 Volts grade copper stranded conductor FRLS wiring cable two run of size 2.5 Sqmm as main wire and one run of earth wire of size 2.5 Sqmm multi-strand copper conductor cable for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn in existing PVC / Mild Steel conduit with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed for following point wirings:---

One light / fan point controlled by one switch

One light point controlled by two, two way switch

One buzzer or bell point controlled by one, one way switch

One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board.

Description same as per item No. 8 here in above but with 1100 Volts grade copper stranded conductor FRLS wiring cable two run of size 2.5 Sqmm as main wire and one run of earth wire of size 2.5 Sqmm multi-strand copper conductor cable for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified & directed.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC casing / caping 25mm dia and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC casing / caping shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 16 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawing through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's including providing 1 run of 16 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 16 sq.mm copper conductor, one run of 16 sq.mm copper earth continuity conductor and one run of PVC riged conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawing into existing conduit and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC riged conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Switch piano single pole one way 5 Amps flush type conforming to IS complete all as specified & directed.

Switch piano flush type single pole one way 15 Amps flush type complete all as spicified & directed.

Switch piano flush type single pole two way 5 Amps flush type complete all as spicified & directed.

Bell push 5 Amps flush type conforming to IScomplete all as specified & directed.

Socket out let 2 in 1, 3/5 pin 5 Amps conforming to IS complete all as specified & directed.

Switch socket combination 2 in 1, 5 Pin 15 Amp flush type conforming to IS complete all as specified & directed.

Ceiling rose surface bakelite type three terminals of polycarbonate body complete all as specified & directed.

Lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

Stepped type electronic fan regulator flush type suitable for ceiling fan complete all as specified & directed.

Electric ding dong bell AC operated on 230 Volts complete all as specified & directed.

Taking down / out existing ceiling fan or exhaust fan and kept in safe custody and re-fixing in same places after point wiring work including 0.5 RM twin core copper wire for connection from ceiling rose to equipment [Ceiling fan or exhaust fan] including one coat painting with symthetic enamel paint complete all as specified & directed.

Taking down / out existing serviceable light fittings and kept in safe custody and re-fixing in same places or other place after complete point wiring work including twin core copper wire for connection from ceiling rose complete all as specified & directed.

Single pole & neutral sheet metal enclosure with two pin and earth plug and socket complete with & including one number of MCB SP 20/25 Amps complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T / Indo Asian

LED luminaire soft light glare free symmetrical illumination surface mounting ceiling light 2x2 panel fitting 34W LED high lumen efficasy LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making conection with and including 23/0.0076 flexible copper wire two core from connector to ceiling rose not more than 1.2mtr, fixed on wall firmly complete all as specified and directed. Make: Havells model pluto panel 2x2 Neo Cat part No. PLUTONEO2X2PLR34WLED8405 or techno-commercially equivalent model in Philips/ Crompton as approved by GE.

LED street light 25W 230V single phase AC electric supply with necessary MS pipe 25mm bent to shape and fixed to wall with MS clamps made of MS 40 X 6 with necessary nut, bolts and washers, connecting upto ceiling rose with help of 3core PVC insulated copper conductor cable of 1.5Sq.mm complete all as specified & directed. Make: Wipro cat part No. LR02-2xxx-57-xx/ Bajaj Cat part No. BRLEP25W LEDWH or techno-commercially equivalent model in Havells/ Philips/Crompton as approved by GE.

Batten light fittings 1x18 watt four feet long decorative box type [Ultra slim] linear LED [6000K] with co-extruded polycorbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire & fixed to wall firmly complete all as specified & directed. Make : Crompton Trim Linea Cat Part No. LCTL-18-CDL / Havell's Cat part No. LHEXBLP7PN1W018 E-Lite LED Pride Plus 18 W / Bajaj BCLSB 18W LED or model make in Philips as approved by GE.

Aesthetically desigend LED mirror light fitting 1x9 watt LED 6500K, decorative, Indirect up down LED lighting fixture with co-extruded polycarbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire or fixed to wall firmly complete as specified & directed. Make : Havells Cat Part No. LHEXARP6PN1W009 / Crompton Cat part No. Trim Linea Cart part No. LCTL-9-CDL or techno-commercially equivalent model in Bajaj or Philips as approved by GE.

LED bulk head light fittings 1x10 watt having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly complete all as specified & directed. Make : Havell's Model "Endura Rugby" Cat Part No. LHEOAOP7UZ6W010 / Bajaj Model Wee Plus Cat Part No. BIBWP10LED / Crompton or Philips Cat Part No. WT202W LED 6S CW PSU S1 PC as approved by GE.

Wall mounting light fittings 20 watt polycarbonate body, decorative type, un-breakable light fittings weather proof, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible copper wire or fixed to wall firmly complete all as specified & directed. Make : Havell's Model LUMILINEPLUSBS20WLED865SPCSS / Bajaj / Crompton cat part No. LHFODFEITCIW015 or Philips as approved by GE

LED ceiling mounted light fitting 12 watt LED 6000K, surface decorative type polycarbonate body LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on ceiling/wall complete all as specified & directed. Make : Crompton Cat part No. LCSR-12-CDL/ Bajaj Model TARA cat part No. BGCML12WH as approved by GE

Aesthetically desigend LED spot light fitting 1x6 watt LED 6000K, surface decorative type polycarbonate body LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on ceiling/wall complete all as specified & directed. Make : Crompton Cat part No. LCSSR-6-CDL/TL/WW or Havells Cat part No. LHEBKJP7IZ1W005 or techno-commercially equivalent model in Bajaj/ Philips as approved by GE .

Aesthetically desigend LED spot light fitting 1x9 watt LED 6000K, surface decorative type polycarbonate body LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on ceiling/wall complete all as specified & directed. Make : Crompton Cat part No. LCSSR-9-CDL/TL/WW or Havells Cat part No. LHEBKJP7IZ1W009 or techno-commercially equivalent model in Bajaj / Philips as approved by GE .

Aesthetically desigend LED spot light fitting 1x12 watt LED 6000K, surface decorative type polycarbonate body LED lighting fixture, environmental friendly, energy efficient complete with all accessories, prewired and making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on ceiling/wall complete all as specified & directed. Make : Crompton Cat part No. LCSSR-12-CDL/TL/WW or Havells Endura Cat part No. ENDURAHODLR12WLED857S/OD or techno-commercially equivalent model in Bajaj/ Philips as approved by GE .

Recess mounted decorative LED light fittings of size 600 mm x 600 mm, 36 Watt LED 2800-6500 K lumen efficiency, high brightness including suitable driver poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire complete all as specified & directed. Make : Crompton Arion III Cat PArt No. LCTLSN-36-CDL / Philips Model full glow Cat Part No. RC 380BLED36S-6500G4L60W60PSU OD / Havell's model Pluto Panel 2x2 Neo Cat No. PLUTO NEO 2x2 PLR34LED8405 as approved by GE

Earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:3:6 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC 1:2:4 type B-1 using 20mm crushed stone aggregate cover with 8mm dia # TMT bars @ 80 mm centre to centre both ways i.e. horizontal and vertical and testing for required value complete including excavation and earthwork and connecting the earthing point/ equipment complete all as specified & directed. Note :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

Sheet metal enclosure MCCB DB's double door [Acrylic], triple pole and neutral vetical type, 415 volts, 4 way with 200 Amp rated bus bars, including MCCB of 160 Amp TPN breaking capacity 25 KA breaking capacity with thermal magnetic release as incommer and 06 Nos MCB SP 6-32 Amp "B" Series breaking capacity 10 KA as out going & blanking plate wherever required and IP-43 degree protection making necessary electric connections with lugs complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T / GE Power

Sheet metal enclosure MCB DB's double door [Acrylic], Single pole and neutral, 240 volts, 8 way with 200 Amp rated bus bars with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections with lugs complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T / Indo Asian / GE Power

Sheet metal enclosure MCB DB's double door [Acrylic], Triple pole and neutral, 240 volts, 4 way with 200 Amp rated bus bars with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections with lugs complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T / Indo Asian / GE Power

Sheet metal enclosure MCB DB's double door [Acrylic], Single pole and neutral, 240 volts, 4 way with 200 Amp rated bus bars with blanking plate wherever required and IP-43 degree protection making necessary incomming & outgoing electric connections with lugs complete all as specified & directed. Make : Legrand / Schneider / ABB / L&T / Indo Asian / GE Power

MCB SPN 6-32 Amp, 240 volts 10KA 'B series' complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T/GE (Power)

MCB SP 6-32 Amp, 240 volts 10KA 'B series' complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T/GE (Power)

MCB TPN, four pole 63 Amp, 240 volts 10KA 'C series' complete all as specified and directed. Make: Legrand/ Schneider/ ABB/ L&T/GE (Power)

LED panel driver powered by an Independent Self output electronic LED driver SMPS based constant current supply suiatable for 230 Volt for 20 /22 watt LED light fittings of make Havells Cat Part Number LSSCRx2205 or equivalent make in Crompton / Philips complete all as specified & directed.

LED panel driver powered by an Independent Self output electronic LED driver SMPS based constant current supply suiatable for 230 Volt for 32 / 36 watt LED light fittings of make Havells Cat Part Number LSSCRx2208 or equivalent make in Crompton / Philips complete all as specified & directed.

PITAMBARI TRADERS

Mohit Enterprises

Aawadh associates

R K GUPTA AND SONS

SHIVAM TRADERS

Bharat Trading Company

Minakshi constuction co.

Raj and satish enterprises

sethi tradres

M/S SS Tarders

RK Enterprises