GE (N) P/TOKEN- 64 OF 2023-2024REPAIRS TO FLOORING, PLUMBING, WATER PROOFING AND PERIODICAL SERVICES TO CHITRAGUPTA COLONY AND CERTAIN AREA IN THE AREA OF AGE (CENTRAL) OF GE (N) PUNE

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc upto 12.0m height of Bldg complete all as per specifie and as directed

M&L for 15mm thick cement plaster in CM 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC on cement complete complete all as per specifie and as directed (Note: WPC shall be measured in separately).

M&L for rendering 15 mm thick cement plaster on faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement upto 12.0mtr height of bldg complete complete all as per specifie and as directed

M&L for 15mm thick cement plaster in CM 1:4 on concrete roof finishing the surfaces even and smooth without using extra cement upto 12.0m height of Bldg with using @ 2% WPC of cement including cleaning the roof before the starting complete complete all as per specifie and as directed (Note: WPC shall be measured and paid separately).

M&L for 10mm thick cement plaster in CM 1:3 on concrete ceiling surfaces finishing the surfaces even and smooth without using extra cement with any height of Bldg complete complete all as per specifie and as directed

Supply only for integral waterproofing compound

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over a coat of primer on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper of any tint over a coat of primer over a thin layer (1 mm to 1.5 mm) of wall care putty upto 12.0mtr height of Bldg complete complete all as per specifie and as directed

M&L for preparation of new plastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of primer upto 12.0mtr height of Bldg complete complete all as per specifie and as directed

M&L for preparation of old surfaces and applying two coat of white wash on ceiling including washing rubbing, brooming down with wire brush scrapping down smoke roots, moulds salts and treading oil and greasy spots complete all as specified & directed.

M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old wall surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to mangalore tiles, roof, parapet, wall ,floor etc, on heritage buildings including complete removal of existing treatment complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for preparation of old decorated surfaces and applying one coat of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) on wall complete all as specified and as directed by Engineer-in-charge. NOTE: This item of work is to be operated upto 15m Building Height.

M&L for applying two coat of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on wall surfaces incl complete removal of existing treatment all as specified and directed.

M&L for applying two coat of Oil bound distemper over a coat of primer over a layer of wall care putty (1 to 1.5 mm thick) on ceiling surfaces incl complete removal of existing treatment complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of Oil bound distemper on old surfaces of walls all as specified and directed.

-Ditto- all as per item srl No 16 above but applying two coats.

M&L for preparation of old plastered or unplastered ceiling surfaces including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of Oil bound distemper all as specified and directed.

M&L for preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old wood or wood based surface and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old surfaces of wood and applying one coat of synthetic enamel paint on ceiling surface complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of wall and applying one coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old decorated plastered/ unplastered surfaces of wall and applying two coat of plastic emulsion paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of lustre paint complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying two coat of lustre paint complete all as specified and as directed.

M&L for french polishing on wooden surface of any description, width or girth including cleaning and preparing the surfaces with a coat of wood filler and applying two or more coats of french polish till the desired finish is obtained complete all as specified and as directed.

M&L for preparation of old wooden/wood base surfaces of wall/floor and applying one coat of malamine polish including filling of cracks and holes etc complete all as specified and as directed.

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall and chajja terrace and parapet walls, grooves etc. such as , CEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises complete all as per specifie and as directed

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete complete all as per specifie and as directed

-Ditto- all as per srl no. 30 above but skitings/dado on vertical surfaces including 10mm thick backing coat of cement plaster in CM 1:4 complete all as per specifie and as directed

M&L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete complete all as per specifie and as directed

M&L for glazed ceramic coloured tiles of size 300x450x7-8mm thick, on vertical surfaces of walls such as skirting dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in CM1:4 complete all as per specifie and as directed

M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.36 sqm as in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 of any description complete complete all as per specifie and as directed

-Ditto- all as per srl no. 34 item above but in skitings/dado on vertical surfaces (size n. exc. 0.09sqm) including 10mm thick backing coat of cement plaster in CM 1:4 complete all as per specifie and as directed

M&L for 15 to 18 mm thick sand stone not exc. 0.18 sqm in size of each stone as exterior wall cladding for decorative purposes set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of stone and including 10mm thick backing coat in CM 1:4 complete all as per specifie and as directed

M&L for 7 to 8 mm thick textured tiles exc 0.06 sqm but not exc. 0.18 sqm in size of each tile as exterior wall cladding for decorative purposes set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of stone and including 10mm thick backing coat in CM 1:4 complete all as per specifie and as directed

M&L for textured heavy duty exterior ceramic tiles of size 300mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed of 20mm thick in CM (1:6) complete all as per specifie and as directed

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm aggregate) Cement concrete as in sub base including demolition of damaged PCC sub base complete all as specified and as directed

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over sand cushioning laid dry to the profile including filling the joints with sand including dismantling of existing tiles of any description complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Labour only for paver blocks laid over sand cushioning including dismantling of existing paver blocks of any size and shape.

M&L for crushed sand cushioning under paver blocks all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including demolishing of existing as directed

M&L for 25mm thick coloured glossy rubber moulded chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes including dismantling of existing complete all as specified and as directed.

M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform,WHB platform and like set in cement mortar (1:4) including pointing in white or coloured cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling of existing stone slab complete all as per specifie and as directed

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as per specified and as directed

M&L for Machine cut kota stone slab flooring 18-20mm thick over in riser of steps, skirting, dado and pillar laid over 10mm thick packing of plaster in CM 1:4 and jointed with cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slab complete all as specified and directed

M&L for machine cut 20-25mm thick polished cudappah stone slab as in shelves, partitions, cooking platform below granite stone and like including necessary jointing and pointing in cement mortar and making good to disturbed surface including dismantling of existing stone slab complete all as specified and directed

M&L for PCC type D-2,1:4:8 (using 40mm graded stone aggregate) as in foundations, sub base of floor,filling and mass concrete including demolition of existing complete all as per specifie and as directed

M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc10 cm in width, type C-1,1:3:6 (using 20mm graded stone aggregate) and setting in cement mortar 1:6 including demolition of existing complete all as per specifie and as directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick in plinth protection, laid in alternate bays not exc. 3.0m in length, finished surfaces even and smooth without using extra cement including demolition existing concrete and rubbish off the premises complete all as specified

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified..

-Ditto- all as per Srl item No 53 here-in-before, but fixing only

S&F for 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all including taking down existing G I tubing as specified.

All as per Srl item No 55 here-in-before, but fixing only

M&L for cutting chases pinning in brick work for concealing water tubing and making good to facing where required and pointing in cement motar 1:3, cutting n.exc. 10cm girth complete all as per specifie and as directed

S&F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete complete all as per specifie and as directed

S&F in repair PVC connection 15mm bore size with PTMT nuts and washers of length 450mm complete all as per specifie and as directed

S&F rotational moulded polyethylene water storage tank 3 layer black/white colour water tank, non- toxic effect, algea formation protection (made frome virgin grade of polyethy-lene material which is duly stablized with anti-oxident plastic) of capacity 500 litres, cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete including dismantling existing water tank all as specified and directed.

-Ditto- all as per item No 60 here in before but 1000Ltrs capacity complete all as specified and directed.

S&F for repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including long Arm P-trap (CI) 100 mm dia of lenght up to 700 mm or as per site requirement ,complete including making good to floor complete all as per specifie and as directed

S&F in repairs vitreous China wash down water closet pan (pedestal pattern) EWC white, including trap, connection to drain (outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC jet for Pedestal pattern pan including 450/600mm long PVC connection and plastic water closet seat of white in colour, back closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete complete all as per specifie and as directed

Supply and fix in repairs vitreous china wash down floor mounted coupled water closet with PP soft close seat cover, hinges, fixing accessories and accessories set, size 410x720x800mm, S trap 250mm, flushing cistern with cistern fittings complete all as specified and as directed. Make :- Jaquar Cat No. VGS-WHT-81751 S (Bowl) and VGS-WHT-81201 (Cistern) or of equivalent make as per Appx 'A' as approved by GE

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including 32mm brass CP waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Pt No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair vitreous china Urinal, Half stall type, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe complete complete all as per specifie and as directed

S&F in repair vitreous china long stall type Urinal, white including brass CP 32mm waste pipe and CP brass spreader for fixing with 15 mm dia pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe Make: Cera 5001 large urinal (white of size 420x395x635mm) complete complete all as per specifie and as directed

S&F in repair vitreous china urinal partition white size 580x380mm including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white of bowl size 550 x 440mm including CP brass waste coupling and PVC waste pipe, 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy 15 mm bore to be fixed with and including M S brackets complete complete all as per specifie and as directed

S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device for pedestal pattern WC/semi pedestal and WC (Anglo indian type) complete all as specified and directed.

S&F in repair 32mm dia PVC waste pipe for WHB/kitchen sink of length 1.0m including fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair 32mm dia PVC waste pipe for urinal of length upto1.0m including coupling including fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair 40mm dia PVC waste pipe for kitchen sink upto1.0m including coupling including fixing the same complete all as specified and directed Make:Prayag or ISI marked

S&F in repair cabinet mirror plastic body for toilet of size 350mm x 450mm with 4mm thick looking mirror complete complete all as per specifie and as directed

S&F in repair Double arm wall mounted reversible plain/magnifying(x3) Pivotal mirror fixing with brass or stainless steel screws complete complete all as per specifie and as directedMake : Prayag Cat Pt No GBSM-101 or equivalent

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling waste coupling of CP brass of suitable size, 32mm dia PVC waste pipe and CP grating and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914mm x 460mm, bowl size 405mm x 330mm x 160mm complete all as per specifie and as directed

S&F in repair stainless steel 110 mm dia sink coupling complete all as specified and directed.

S&F in repair of stainless steel plate rack of size 24" X 24" X 10" complete complete all as per specifie and as directed

S&F in repair of stainless steel plate rack of size 24" X 30" X 10" complete complete all as per specifie and as directed

S&F in repair 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as per specifie and as directed

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as per specifie and as directed

S&F in repair for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed.

S&F in repair glass shelf of size 500x125mm(drop) with chomium plated railing fixed with and including chromium plated bracket complete complete all as per specifie and as directedMake:Prayag Cat Pt No BEA-45G or equivalent

S&F in repair corner glass shelf of size 300mm dia and 8mm thick with chomium plated railing fixed with and including chromium plated bracket complete complete all as per specifie and as directedMake:Prayag Cat Pt No BEA-44G or equivalent

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Prayag Cat Pt No BEA-100 or equivalent

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, all as specified and directed. Make: Prayag Cat Pt No GBA-135 or equivalent

S & F in repair Brass Chromium plated towel rail 600mm long fixed with brass/stainless screws complete all as specified and directed. Make: Prayag Cat Pt No GBA-131 or equivalent

S&F in repair brass chromium plated towel ring fixed with brass/stainless screws all as specified and directed. Make: Prayag Cat Pt No GBA-132 or equivalent

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete complete all as per specifie and as directed Make: Prayag Cat Pt No-6709 or equivalent

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Make: Prayag Cat Pt No 6706 or equivalent

S&F in repairs washing machine cock quarter turn suitable for 15mm bore pipe with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete complete all as per specifie and as directed Make:Prayag Cat Pt No 7305 or equivalent

S&F in repairs pillar taps swan neck suitable for 15mm bore pipe long body fancy type brass CP with capstan head screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as per specifie and as directed Make : Prayag Cat Pt No 6714 or equivalent

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete complete all as per specifie and as directed Make:Prayag Cat Pt No 6402 or equivalent

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete complete all as per specifie and as directed Make:Prayag Cat Pt No PR-544 or equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete complete all as per specifie and as directed Make:Prayag Cat Pt No 7312 or equivalent

S&F in repairs sensor urinal fixed with urinal pot with necessary fittings including PVC connection etc complete complete all as per specifie and as directed Make:Prayag Cat Pt No GBSU-101 or equivalent

S&F in repair 300mm over head brass shower arm with flange complete all as specified and directed. Make : Prayag Cat Pt No BOS-86 or equivalent

S&F in repair brass chromium plated over head radio shower 80mm size (without arm) with swivel joints including fixing arm/ pipe complete all as per specifie and as directed Make: Prayag Cat Pt No BOS-103 or equivalent

S&F in repair Toilet paper holder of stainless steel, all as specified and directed. Make: Prayag Cat Pt No GBA 118

S&F in repairs bip taps standard of PTMT any colour 15mm bore min wt 90gms Make: Prayag or equvalent of ISI marked

S&F in repairs Pillar taps standard of PTMT any colour 15mm bore min wt 125gms Make: Prayag or equvalent of ISI marked

S&F in repair 75mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1,1:2:4 using 20mm graded stone aggregate complete complete all as per specifie and as directed

S&F in repair grating round 75 mm size of steel CP with/without hole complete all as per specifie and as directed

S&F in repair grating round 100mm size of steel CP with/without hole complete all as per specifie and as directed

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as per specifie and as directed

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors complete all as per specifie and as directed

S&F in repairs 110mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as per specifie and as directed

S&F in repairs 75mm bore PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls complete all as per specifie and as directed

S&F in repairs PVC (SWR) bends of any radius of 110mm bore complete all as per specifie and as directed

S&F in repairs PVC (SWR) bends of any radius of 75mm bore complete all as per specifie and as directed

S&F in repairs PVC (SWR) branch piece single (single ‘Y’) equal or unequal for 110mm bore PVC pipe complete all as per specifie and as directed

S&F in repair PVC(SWR) branch piece single (single ‘Y’) equal or unequal for 75mm bore PVC pipe complete all as per specifie and as directed

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 110mm bore pipe complete all as per specifie and as directed

S&F in repair for PVC (SWR) junction single (single ‘T’) equal or unequal with access door for 75mm bore pipe complete all as per specifie and as directed

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as per specifie and as directed

-Ditto- all as per item No 117, here in before but on 75mm dia of bore

M&L for welding in repairs exc 2.5cm but n.exc 5.0cm in length and thickness of metal to be welded n.exc 6mm complete all as specified and directed.

S&F in repair of door seal made out of aluminum section/flat colour coated 40mm wide with nails to cover the gaps between door and floor and similar places complete all as specified

Taking down chowkats or frames not exc. 1.5 sq. m each with shutters of any description (without taking off shutters from the frames) complete all as specified and directed

All as per item No 121 above but exc. 1.5 sq.m but n exc 4 sqm each complete all as specified and directed

Taking down shutters of any description not exc. 1.5 sq. m each complete all as specified and directed

All as per item No 123 above but exc 1.0 sq. m but n exc 2.0 sqm each complete all as specified and directed

S&F aluminium anodised powder coated ventilator using rectangular tube of size 63.50 x 25 x 1.50 mm including 3.50 mm thick designer glass louvers and stainless steel wire mesh 0.36 mm nominal dia of wire, average width of aperture 1.40 mm using ‘Jindal” aluminium section complete all as specified and directed.

S&F for aluminium powder coated three track sliding window with two glazed shutters with 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make complete all as specified and directed. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

M&L for powder coated aluminium frame for doors,windows, ventilators,partition with one or more rebates includinguding joining cleat for fixing etc complete all as specified

S&F for powder coated aluminium door shutters,aluminium section weighing 0.55 kg/m includinguding necessary joining cleats,glazing clips, ruber neoprene packing,150mm handles 2 Nos in each door,100 mm 03 Nos hinges, 200 mm tower bolt 01 No anodised aluminum snap beading screws etc complete all as specified and as directed.

S&F in 10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work includinguding cutting to shape, drilling holes required complete all as specified and directed

S&F in 4mm thick figured glass, pinhead type in squares exc 0.5 sqm each pane fixed with aluminum frame work complete all as per specifie and as directed

S&F in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, double rebate 125 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum, all as specified and directed. NOTE: During fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F second class HW 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

M&L for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned atjoints, supplied and fixed complete all as per specifie and as directed

S&Ffor second class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Pt I, section 8, clause 8.24 (a) supplied and fitted to chowkats including two coat of synthetic enamal paint over one coat of pink primer Complete all as specified and directed.

S&F for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters includinguding two coat of synthetic enamal paint over one coat of pink primer complete all as specified and directed.

S&F factory Made Solid PVC Molded shutter of 28 to 30 mm thick (stiles), consisting of frame made up of MS tube of size 40mm X 20mm (19 gauge) for top, bottom rail, and in stiles rail, with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 5mm thick Prelam PVC sheet on back face. Inside core shall be of PVC solid board of 20 mm thick. Door shall be provided with 20 mm thick Pvc lipping all around the edges, fixing in frame at site complete all as specified and directed Note : All screws shall be self tapping and length of Screw not less than 50 mm.

S &F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.

S &F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples fixed on wood or steel frame complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality in any type of frames and glazing with oil putty (or beading) in square n. exc. 0.5 Sqm in each pane including hacking out old broken glass from wooden/steel frames in any height of Bldg including necessary scaffolding etc complete complete all as per specifie and as directed

Ditto- all as per item No 141 above but figured/frosted glass complete complete all as per specifie and as directed

S&F Stainless steel butt hinges medium weight 100mm all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm

S&F 100mm butt hinges med weight cold rolled mild steel fixed with chowkats complete all as specified and directed

S&F 150mm, Mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete complete all as per specifie and as directed

S&F in repair aluminium die cast body Door closer hydraulically regulated designation No 2, universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60kg ISI Marked complete.

S&F 250mm long anodised aluminum sliding door bolts with hasp and staple(bolt type) and fixing clip sheet cast or extruded sections and fixing bolts and sliding bolts complete complete all as per specifie and as directed

S&F 125mm long aluminum anodised barrel tower bolts of extruded section and fixed with door complete all as specifed and directed.

S&F 125mm long aluminum handles, fabricated type anodised and fixed with door complete all as specifed and directed.

S&F for floor door stopper of brass body and tongue not less than 100mm long, anodised with hard drawn steel spring all as specified and as directed.

S&F in repair 20 mm bore mild steel drapery rod with 1 mm thick PVC wood grain coating including knobs complete all as specified and directed..

S&F in repair bracket for above mentioned curtain rod fixed with rawl plug and screws compete complete all as per specifie and as directed

S&F in repair stainless steel hasp and staple of 100 mm size including bolt to hinge plate fixed with Self Tapping screws all as specifed and directed by Engr-in-Charge

S&F 18/19mm thick Ply board for insulation purposes fixed with to timber framed work including taking down with existing one complete all as per specifie and as directed

S&F 18 mm thick UV coated exterior grade MDF board duly edge banded with 0.8 mm thick PVC taping, fitting of shutters shall be fixed as approved by GE suitable for cup board etc. including taking down with existing one complete all as specified and directed.

S&F for HDHMR (high density high moisture resistance) board manufactured with hard wood, prelaminated both sides white in colour 18 mm thick water resistant, termite resistant, duly edge banded with PVC taping 0.8 mm thick, cut to shape & size as in cupboards/shelves/cabinets and similar work etc including taking down with existing one complete all as specified and directed.

S&F auto closing hinges with stainless steel screws including taking down with existing one complete all as per specifie and as directed

S & F continuous (piano) hinges, stainless steel, width of flaps (when open) in 20mm, 0.8mm thickness complete all as specified & directed.

Taking down shutters of any description area exc 1.0 Sqm but not exc 2.0 Sqm each and refixing in same opening including easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws, welding etc.complete complete all as per specifie and as directed (S&F of new builder's hardware if specially ordered shall be measured and paid for separately)

S&F in repair stainless steel mortice lock,vertical type, size 100mm with 4 levers fixed to door complete all as specified

Dismantling of structural steel work of any description including doors, gates, framed trusses etc. complete all as specified and as directed.

Supply and fix mild steel work in tubular trusses, beams, rafters, purlins, main columns, posts etc., for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

M&L for mild steel framed work such as grill, grating etc. with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.

Supply and fix rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and includinguding either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness,including nainital or similar pattern roof coverings

Dismantling of asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

-Ditto- all as per item No 172 above here in before but plain sheets on riges,valley gutters and similar works etc complete all as per specifie and as directed

S&F in repair 2mm thick fibre glass reinforced translucent corrugated or plain sheeting with coach screw and washers in roof or wall etc complete all as specified and directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets, ceiling grid etc complete all as per specifie and as directed

M&L for fully perforated 12 mm thick micro tegular edged or 10 mm squar edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO.50 to 0.75 as per IS-8225; 1987, Noncombustible as per BS-476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal. T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per Sqm incl both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2mm, galvanised iron perimeter wall angle of size 24 x 24x o.40 mm of length 3000 mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out upto 12 Mtr height as per specifications, drawing and as directions of the Engr-in-Charge.

Removing of vegetation / plantation on the wall/ roof/ any position of up to fourth storey building including necessary scaffolding and roots, girth n. exc. 10cm each and applying chemical treatment with GLYPHOSATE 41% and making good surface including removing /refixing of CI/GI pipe lines complete all as specified and as directed. (Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

S&F in repair drapery curtain rod of stainless steel 20mm/25mm dia complete with stainless steel bracket and side caps fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete complete all as per specifie and as directed

S&F in repair bracket for curtain rod of stainless steel 20mm dia fixed with rawl plug and steel screw compete complete all as per specifie and as directed

Dismantling of boarding, any description, fixed in any position with nails complete all as per specifie and as directed

M&L in repair second class hard-wood in scantlings for clean sawn timber framed work complete all as per specifie and as directed

M&L in preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with Creosote

M&L for 12mm thick plywood, grade BWR,type BB, number of ply 09 nos, fixed with fevicol and nails for working table/storage almirah to the size and pattern fixed with wooden frame work, including taking down existing plywood complete all as per specifie and as directed

S&F for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work complete all as per specifie and as directed

M&L for preparation of new wood or wooden base surfaces and applying french polishing on surfaces of any description,width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as per specifie and as directed

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

A.S.ENTERPRISES

S M MISHRA

R k construction

K.S.JITE AND SONS