GE AF/AMB-28/2021-22 REPAIRS AND MAINTENANCE OF STEEL FURNITURE AND MISC / TP FURNITURE INCLUDING PAINTING FOR SITE-II, III, IV AND 260SU PATIALA AND AF STATION AMBALA UNDER GE (AF) AMBALA

Amount

Repairs / replacement, etc. of the following parts / components as required for almirah large steel with shelves complete all as specified and as directed Note: Reference drawing FD-67(M) & 1031

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F MS rod for locking device 10mm dia as per existing shape and size

S&F shelves made out of 1.00mm thick MS sheet of size 485x920mm as per existing

S&F chromium plated MS handle 150mm long as per existing pattern and design

S&F suitable 3 way locks of existing pattern, 4 lever with cover and set of duplicate keys

S&F MS cleats for shelves made out of 1.00mm thick MS sheet

S&F key hole outer cover of approved design

S&F key hole inner cover of approved design

M&L for complete removal of existing treatment and preparation of surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxude zinc chrome primer by spray guns to both internal and external surfaces

Repairs / replacement, etc. of the following parts / components as required for locker bed side steel with shelves complete all as specified and as directed Note: Reference drawing FD-1029

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F aluminium hasp and staple of size 150mm

S&F shelves made out of 1.00mm thick MS sheet of size 485x920mm as per existing

S&F chromium plated MS handle 100mm long as per existing pattern and design

S&F door shutter made of 1.00mm thick MS sheet of size as per existing

S&F MS cleats for shelves made out of 1.00mm thick MS sheet

M&L for complete removal of existing treatment and preparation of surfaces by rubbing with emery paper, scrapping, denting, etc. and entirely applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxude zinc chrome primer by spray guns to both internal and external surfaces

Repairs / replacement, etc. of the following parts / components as required for almirah medium steel with shelves complete all as specified and as directed Note: Reference drawing FD-243 & 1032

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F MS rod for locking device 10mm dia as per existing shape and size

S&F shelves made out of 1.00mm thick MS sheet of size 440x765mm as per existing

S&F chromium plated MS handle 100mm long as per existing pattern and design

S&F suitable 3 way locks of existing pattern, 4 lever with cover and set of duplicate keys

S&F MS cleats for shelves made out of 1.00mm thick MS sheet

S&F key hole outer cover of approved design

S&F key hole inner cover of approved design

M&L for complete removal of existing treatment and preparation of surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxude zinc chrome primer by spray guns to both internal and external surfaces

Repairs / replacement of the following parts / components as required for form without back complete all as specified and as directed Note: Reference drawing FD-77/1027

S&F seat made of shisham / hollock wood planks of size 1525x255x19mm thick duly painted with two coats of creosote duly fixed with and including suitable nuts and bolts

S&F legs made of MS black tubing 25mm square, having 1.6mm wall thickness cut to size required

S&F centre stiffeners made of MS black tubing 25mm square, having 1.6mm wall thickness cut to size required

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

M&L for gas welding to loose / eroded / corroded joints to parts of furniture items any type as shown on drawings

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour)

Repairs / replacement of the following parts / components as required for form with back with steel frame complete all as specified and as directed Note: Reference drawing FD-78/1027

S&F seat made of shisham / hollock wood planks of size 1525x255x19mm thick duly painted with two coats of creosote duly fixed with and including suitable nuts and bolts

S&F backs made of shisham / hollock wood planks of size 1800x150x19mm thick duly painted with two coats of creosote duly fixed with and including suitable nuts and bolts complete all as specified and as directed

S&F legs made of MS black tubing 25mm square, having 1.6mm wall thickness cut to size required

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

M&L for gas welding to loose / eroded / corroded joints to parts of furniture items any type as shown on drawings

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour)

Repairs / replacement of the following parts / components as required for table office clerk steel complete all as specified and as directed Note: Reference drawing FD-84(M)/1004

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer all as shown on drawing

S&F drawers of table made out of 1mm thick MS sheet over all size of drawer 350x430mm & 410mm deep duly painted with a coat of pink primer all as shown on drawing

S&F of back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer all as shown on drawing

S&F side of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer all as shown on drawing

S&F suitable drawer lock with duplicate keys of apporved type and design

S&F of leg made out of 25mm square conduit 16 gauge cut to requied length and size, including all welding, rubbing, grinding, etc.

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for table office officers steel complete all as specified and as directed Note: Reference drawing FD-84(M)/1003

S&F top of table made out of 18/19mm thick plywood BWR grade of approved make conforming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around top and bottom side of the top shall be painted with a coat of white primer all as shown on drawing

S&F drawers of table made out of 1mm thick MS sheet over all size of drawer as per drawings duly painted with a coat of pink primer all as shown on drawing

S&F of back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer all as shown on drawing

S&F side of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer all as shown on drawing

S&F suitable drawer lock with duplicate keys of apporved type and design

S&F shutters to the box fabricated out of 1mm thick MS sheet duly painted with a coat of pink primer

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for teapoy verandah complete all as specified and as directed Note: Reference drawing FD-255

S&F MS conduit 12mm bore as in short runner of teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken / unserviceable runner

S&F MS conduit 12mm bore as in long runner of teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken / unserviceable runner

S&F top of the teapoy verandha made out of 18/19mm thick ply wood BWR grade of approved make conforming to IS with 1mm thick laminated sheet white at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (white colour) over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for rack side steel with tray (3 spaces) complete all as specified and as directed Note: Reference drawing FD-97(M)

S&F shelves of size 685x255mm made out of 1.25mm thick PBI sheet

M&L for gas welding to loose / eroded / corroded joints to parts of furniture items any type as shown on drawings

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (OG/grey colour) over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for rack shoe steel complete all as specified and as directed Note: Reference drawing FD/E6/MAP/02R

M&L for complete removal of existing treatment and preparation of entire surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxide zinc chrome primer

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

S&F jalli shelves made with 3mm dia MS rod welded to suitable frame all as per detail as shown on drawings

Repairs / replacement of the following parts / components as required for chair tubular steel without arm complete all as specified and as directed Note: Reference drawing FD-75(M)

S&F seat in wooden frame with caning as per 'Godrej' pattern with all required nuts, bolts, washers, screws, etc. duly fixed to chair

S&F back in wooden frame with caning as per 'Godrej' pattern with all required nuts, bolts, washers, screws, etc. duly fixed to chair

S&F MS machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers

M&L for cutting existing damaged portion/s of MS pipe and reinstating with 20mm dia MS conduit pipe 18 gauge (approx 250mm long) with all welding, etc. bent to shape and standard size

S&F MS flat iron 25x3mm, 50mm long for fixing back / seat frame by gas welding to steel frame of chair for supports

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxide zinc chrome primer

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

Repairs / replacement of the following parts / components as required for chair tubular steel with arm complete all as specified and as directed Note: Reference drawing FD-75(M)

S&F seat in wooden frame with caning as per 'Godrej' pattern with all required nuts, bolts, washers, screws, etc. duly fixed to chair

S&F back in wooden frame with caning as per 'Godrej' pattern with all required nuts, bolts, washers, screws, etc. duly fixed to chair

S&F arm wooden made out of 1st class hardwood (Teak) painted with black synthetic enamel paint glossy finish as per drawing

M&L for cutting existing damaged portion/s of MS pipe and reinstating with 20mm dia MS conduit pipe 18 gauge (approx 250mm long) with all welding, etc. bent to shape and standard size

S&F MS flat iron 25x3mm, 50mm long for fixing back / seat frame by gas welding to steel frame of chair for supports

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) over a coat of red oxide zinc chrome primer

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

S&F MS machine screw with bolt, 50mm to 65mm long 3mm to 5mm dia with washers

Repairs / replacement of the following parts / components as required for chair verandah complete all as specified and as directed Note: Reference drawing FD-256

S&F of leg made out of 20mm 1250mm long, round conduit 16 gauge cut to requied length and size, including all welding, rubbing, grinding, etc.

S&F stiffner made out of MS rod 10mm dia, 460mm long

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely two coats of synthetic enamel paint (white colour) over a coat of red oxide zinc chrome primer

M&L for removing existing old worn out nylon cane and reweaving with new 4mm thick oval shaped nylon cane of approved quality, pattern and off white/cream colour all as per drawing

S&F hard rubber shoe square shape with flat top 25mm size as in stoppers to MS pipes

Repairs / replacement of the following parts / components as required for chair computer / revolving complete all as specified and as directed Note: Reference drawing FD/E6/MAP/01TP

S&F in replacement of 50mm thick high density foam cushion for seat of size 425x400mm, edges trimmed all as shown on drawing duly covered with good quality tapestry cloth as approved

S&F in replacement of 6mm thick high density foam cushion for seat of size 400x300mm, edges trimmed with PVC lining all as shown on drawing duly covered with good quality tapestry cloth as approved

S&F in repairs seat made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 425x400mm

S&F in replacement of back made out of 9mm thick curved ply wood (5 ply) BWR grade ISI marked of size 400x300mm

S&F in repairs handle / operating knob as per existing size and shape

S&F in repairs hydrulic as per existing size and shape

M&L for gas welding to loose / eroded / corroded joints to parts of furniture items any type as shown on drawings

S&F in repairs suitable castor wheel pedestal as per existing size and shape

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green/black colour) by spray gun

Repairs / replacement of the following parts / components as required for chair school with hand board complete all as specified and as directed Note: Reference drawing FD/E6/MAP/05

S&F openable (hinged on RHS) table top to slide on rod for adjustment

S&F 18mm thick plywood BWR grade with 1mm laminated seat board on top openable with teak wood edging of size 300x585mm

S&F 4mm thick PVC back and seat in one piece of existing size and shape

S&F basket made out of 5mm dia mild steel wire welded to frame of chair

S&F hard rubber shoe square shape with flat top of existing size as in stoppers to MS pipes

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (of approved colour) by spray gun over a coat of pink primer

Repairs / replacement of the following parts / components as required for rack steel 6 tier (1905x915x305mm) complete all as specified and as directed Note: Reference drawing FD-106(M)

S&F in repairs shelves made out of MS sheet 10mm thick with nut and bolts and welding wherever required all as per drawing

M&L for removing dents from backs, tops, bottoms of shelves making it serviceable and refixing by welding as required

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) by spray gun over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for table computer complete all as specified and as directed Note: Reference drawing FD/E6/MAP/03TP

S&F table top 4'x3' made out of 18mm thick prelaminated particle board laminated on both sides with teak wood beading all round as per existing shape

S&F bottom shelf 18mm thick particle board as per existing size and shape

S&F shelves 18mm thick prelaminated particle board as per existing size and shape

S&F mouse tray 18mm thick prelaminated particle board as per existing size and shape

S&F drawer made out 18mm thick prelaminated particle board as per existing size, pattern and shape

S&F telescopic channel as per existing size and shape for key board tray upto the entire depth of table

S&F hard rubber shoe square shape with flat top of existing size as in stoppers to MS pipes

M&L for gas welding to loose / eroded / corroded joints to parts of furniture items any type as shown on drawings

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely two coats of synthetic enamel paint (olive green colour) by spray gun over a coat of red oxide zinc chrome primer

Repairs / replacement of the following parts / components as required for book case steel (4 compartments) complete all as specified and as directed Note: Reference drawing FD-1028/TP

S&F legs base 'U' shaped made out of 1.25mm thick PBI sheet duly welded with electric welding

S&F door shutter made out of 1.00mm thick MS sheet of existing size as per drawing

S&F shelves made out of 1.00mm thick MS sheet size as per drawing

S&F in repairs MS chromium plated handle 100mm as per existing pattern and design

S&F in repairs 3 way lock, 4 levers with duplicate keys as approved

S&F MS roller as per exiting door size and as per drawing

S&F 5.5mm thick sheet glass as per existing and as per drawing

M&L for complete removal of existing treatment and preparation of entire metal surfaces by rubbing with emery paper, scrapping, denting, etc. and applying entirely one coat of synthetic enamel paint (olive green colour) by spray gun over a coat of red oxide zinc chrome primer

J.D.Builders

M/s Rajesh Kumar Jain