Repairs Maintenance of flooring plinth protections external plaster work brick work stone clading of gate repair to rolling shutter and steel gates etc at AFA Hyderabad

Amount

Demolition of brick work or stone/boulders, pcc block masonry built in Cement Mortar or cement lime mortar including all quoins, arches, pillars etc excluding ashlar facings, dressed stone work and precast concrete articles and removing the unserviceable debris off the premises complete all as directed.

Demolition of Plain cement concrete of any description and in any position not otherwise specifically provided for, etc and removing debris off the premises and complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:4 etc all as specified and as directed.

M&L for brick work with sub class `B' brick (old size bricks) straight or curved on plan exceeding 6 m mean radius built in CM 1:4, complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm of broken stone boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc all as specified and as directed.

M&L Cement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) 75mm thick in sub floor, sub base floor and in pavings etc all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including sand filling with an average thickness of 50mm complete all as specified and as directed.

M&L for Providing plain cement concrete of Type B1 1:2:4 (20 mm graded aggregate) as in kerbs of mud stops, borders, etc,. rounded or chamfered on edges including necessary form work complete all as specified and as directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigments in floors, pavements etc laid over and including screed bed in cm (1:4), 20mm thick complete all as specified and as directed.

M&L for plain Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) 75mm thick as in pavings etc all as specified and as directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, all as specified and as directed.

M&L for 75mm thick plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in top layers of plinth protection, etc., finished even and smooth without using extra cement complete all as specified and as directed.

Dismantling existing Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc complete all as specified and as directed.

S&F of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in ridges, roof covering/cladding to wall, fixed with self tapping screws etc all as specified and as directed.

S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, cut to any size as per site requirements, fixed with self tapping screws etc all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, etc complete all as specified and as directed.

S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc all as specified and as directed.

S&F Rolled Mild Steel Framed works using flat iron, angle iron or other section in gates or simillar works confirming to Fe 410-W (Gde E-250) quality A, complete, including welding or bolting as per site reqirement, making holes wherever neccesary etc all as specified and as directed.

Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, etc complete all as specified and as directed. .

Taking down cement plaster of any description and of any thickness incl racking out joints hacking for keys scrubbing down with water etc and removing rubbish off the premises complete all as specified and as directed.

M & L for rendering 15 mm thick cement plaster in CM 1:4 with WPC on fair faces of brick work or concrete surfaces at any height with neccesary scafoldings, finished even smooth without using extra cement etc all as specified and as specified. (WPC will be paid seperately)

M & L for rendering 15 mm thick in cement mortar 1:3 on ceilings & soffits of stair case waist slab of concrete surfaces at any height with neccesary scafoldings, finished even and smooth without using extra cement etc all as specified and as specified.

M & LPreparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement base primer etc complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of walls and applying two coats white wash etc complete all as specified and as directed.

M & L for preparation of new plastered ceiling surfaces and apply two coats of white wash etc complete all as specified and as directed.

M & L for Cement concrete type B-0 1:2:4 (12.5mm grades aggregate) in haunching concerte, coving, coping, over chajjas, etc, with water proofing compound, complete all as specified and as directed (WPC will be paid seperately)

Supply only liquid water proofing compound .

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, using 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including dismantling existing granite of any descriptions etc complete all as specifed and as directed.

S&F in repairs Steel rolling shutters of 1.25mm thick laths, push & pull or manual type and without ball bearings and as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated and including Taking down existing rolling shutter partly or fully as per site requirement etc complete:

Taking down Top Hood cover and refixing in the same rolling shutter with replacement of nuts and bolts not less than 6mm dia and greasing the guide channel and adjusting the shutter for for proper closing and opening, area of shutter n.exc 10 Sqm etc completed all as specified and as directed.

Taking down Top Hood cover and refixing in the same rolling shutter with replacement of nuts and bolts not less than 6mm dia and greasing the guide channel and adjusting the shutter for for proper closing and opening, area of shutter exc 10 Sqm etc complete all as specified and as directed.

Taking down Top Hood cover and replacement of helical wire spring or flat spring and refixing in the same rolling shutter and greasing the guide channel and adjusting the shutter for for proper closing and opening of any size etc completed all as specified and as directed.

Supply only Ball bearing for rolling shutters etc complete all as specified and as directed

S&F in repairs Armstrong mineral fibre accoustical suspended false ceiling system with optra (board) edge tiles with Armstrong 24 mm exposed grid. The module size of tile is 600x600x20mm having Humidity Resistance (RH) of 95%, NRC 0.9, Colour Black and the grid should be of Armstrong make with 24 mm wide T-section flanges having rotary stitching on all T sections i.e., the main runner, 1200mm & 600mm cross tees with a web height of 38mm and a load carrying capacity of 15.34 Kgs/Sqm. The T Sections have a Galvanizing of 90 gm per Sqm, fixed upto 10m height with necessary scaffolding arrangements etc all as specified and as directed. Note: Rates of all necessary scafoldings and fixing are included in this rates.

S&F in repairs Armstrong mineral fibre accoustical suspended false ceiling optra (board) edge tiles of size 600x600x20mm having Humidity Resistance (RH) of 95%, NRC 0.9, Colour Black, fixed upto 10m height with necessary scaffolding arrangements with necessary scaffolding arrangements etc all as specified and as directed. Note: Rates of all necessary scafoldings and fixing are included in this rates.

S&F in repairs of Anutone Salon Slat plus L16-2 of size 2430x128x16mm thick (shade as specified by Engr-in-charge) with Anutone strut CC18 screw fixed horizontal/vertical to the wall at every 400 mm c/c. metal cleat can be fixed on top edges of Anustone strut CC18. first panel is fastened by sliding the fixing cleat into the groove edge of the panel. Panels are backlined with Anutone synth PF 10x25mm thick which is adhered with stick s7 to the wall. Then further panelling can be done with tongue-groove edge profiles of the wall panels etc all as specified and as directed. Code Variants - WR grade Acoustics - NRC upto 0.85 Climate (OC RH) - 45,70 Termite resistance - yes Light reflectance - 70 % Green (RC%) - 50

S&F in repairs of Anutone Soak fabrics Panels of size 600 X 2400/1200 X 20mm thickness panels with pre pasted fabric of desired shade and color installed on Anutone Strut CC50 at 600 mm centers frame work, to be installed perpendicular to the desired Soak Cord panel orientation. Panels to be backlined with backing material AnutoneSynth PF 10x25mm of density 20kg/m3 meeting Fire rating Vertical flammability as per BS 3119 and horizonal flammability as per IS 15061 and Limiting Oxygen Index 29.3.which is adhered to the wall with Stick S7 with necessary scaffolding arrangements etc all as specified and as directed.

M&L in repairs for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc all as specified and as directed.

M&L in repairs for 6mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work, fixed to the ceilings of height not less than 5m, with necessary scaffolding etc all as specified and as directed.

M&L in repairs for 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one side, fixed with screws to timber frame work

M&L in repairs Second class hard-wood in scantlings, clean sawn timber fixed to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) etc complete all as specified and as directed.

M&L in repairs Second class hard-wood Clean sawn battens at 15cm centres having Sectional area exc 5 and n.exc 15 sq.cm etc complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wood and wood based surfaces of any description including preparation of surfaces, not otherwise described over 10 cm width or girth complete all as specified and as directed.

Sri Sai Krishna Construction

N Sreenivasarao

M.chandraiahsons

M/s RAMA LAKSHMI CONSTRUCTIONS