Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 LAccepted-Finance NO 64 5TH C MAIN 7TH CROSS AGROGYAPPA LAYOUT KAMMANAHALLI NEAR RAJ KUMAR PARK BANGALORE 560084 | BENGALURU URBAN | KARNATAKA | 560084 | L1 | Accepted-Finance Admitted | |
| 2 | L2₹43.0 L+₹2.0 L (4.82%)Accepted-Finance 6 1ST CROSS 1ST MAIN OLD POLICE STATION ROAD LAKKASANDRA BANGALORE 560 030 | BENGALURU URBAN | KARNATAKA | 560030 | L2 | Accepted-Finance Admitted |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
31 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE 560006
PROVN OF CERTAIN SANCTIONED MAJ REV WKS AND MINOR WKS AT CHAF BANGALORE
2023_MES_620195_1
8143/GE/55
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BANGLAORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹75,000
13 Dec 2023
22 Sept 2023
6 Nov 2023
22 Sept 2023
31 Oct 2023
11 Oct 2023
23 Sept 2023 - 29 Sept 2023
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out hard/dense soil all as specified and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil
M&L for PCC 1:4:8 Type D2 (40mm graded stone aggregare) in foundations, filling and mass concrete.
M&L for cutting chases through concrete block or stone walls, pining, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills,sunsheds,shelves, lentel etc and cutting chases for concealed conduit wiring etc and making good cutting exceeding 20cm girth complte all as specified and directed.
M&L for Formwork to sides flat rough finished of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
M&L for Formwork to sides and soffits of rough finished surface of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.
M&L for Formwork to soffits of rough finished surface of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for Formwork to rough finished surface of concrete flat chajjas, troughs and similar items including edges
M&L for Formwork to edges/sides of rough finished surface of roof slab 15cm thick
M&L for RCC (design mix) M-25 using 20mm graded agg for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
M&L for RCC (design mix) M-25 using 20mm graded agg for RCC Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M&L for RCC (design mix) M-25 using 20mm graded agg Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shaperequired, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm diain stirrups, spacers and binders complete all as specified and directed.
M&L for Pre cast cement concrete block masonry with soild blocks, type C1 (1:3:6) using 20mm graded aggregate exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.
M&L for Providing precast cement concrete solid building blocks or slabs type C1 (1:3:6) using 20mm graded aggregate 10 cm thick (with plain or interlocking joints as directed) and setting in cement mortar (1:6) complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering rendering 10mm thick in cement morter 1:6 and 5mm thick in cement morter 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc finished even and smooth without using extra cement complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)
M&L for rendering 5mm thick on concrete surfaces of ceiling in cement morter 1:3 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 100 mm thick hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface.
M&L for 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring or pavings etc all as specified and directed
M&L for 25 mm thick Cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in sub base of flooring
M&L for Non skid ceramic coloured joint free tiles 7to 8mm thick (square/ rectangular) area of each ties exc 0.18sqm but n exc 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement mscreed bed 15 mm thick in cement mortar (1:4) laying floor finish complete all as specified and directed.
M&L for glazed ceramic tiles in vertical surfaces 300 x450x7/300x600x7 mm thick , thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including cement screed bed 10mm thick in cement mortar (1:4) complete all as specified and directed. all as specified and directed by Engr-in-charge.
M&L for cement concrete type C-1, 1:3:6 (20mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair.
M&L for preparation of newly plastered surface of wall and apply three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered surface of ceiling, pillasters, cornics and apply three coats of white wash complete all as specified and as directed.
M &L for preparing new plastered or un plastered old surface of walls and applying two coats of Cement base paint on walls.(External) including with alkali resistant priming paint complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.of hard/dense soil.
Removing excavated soil not exceeding 50 metre and depositing at a level not exceeding 1.5 metre above the starting point
Removing Excavated soils exceeding 1.5 Km but not exc. 5 Km and depositing where directed.
M&L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and tabil top for fixing wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes all as specified and as directed by Engr-in-charge.
S&F framed work such as grills, gratings etc, with ends of bars, shouldered, end or riveted or forged into spikes framed gaured bars barrel iron doors ladders, framed blausters walk ways,raillings,framed water tanks and similar works confirming to Fe Fe 290 Gde-E-165 complete all as specified and directed.
M&L for preparation of new surfaces of steel over 10cm in width or girth with two coat of synthetic enamel paint over coat of primer red oxide primer complete all as specified and directed.
S&F 18-19mm thick prelaminated particle board interior grade prelaminated on one side with decorative choice lamination and with balancing white on the other side, fixed to aluminium/wooden frame work as in panel, etc., fixed complete all as specified and directed.
S & F coninous (piano) hinges width of flafs 30mm with galvanized brass, bright finish complete all as specified and directed by Engr-In-Charge.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame complete all as specified and directed by Engr-In-Charge. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.
S &F Factorey made solid PVC Moulded door shutter,28 to 30mm thick(stiles),with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face ,with particle board core supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed by Engr-In-Charge.
S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 22 complete all as specified and directed by Engr-In-Charge.
S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-In-Charge.
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-In-Charge.
S&F powder coating aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws
S&F for 4mm thick Figured glass, pin head type and fixed with aluminium beading in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.
M&L for rendering 15mm thick in cement mortar 1:3 mixing with water proofing compound at 200ml for nag of cement on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement all as specified as directed.
M&L for water proofing treatment on horizontal and vertical surfaces with applying of oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 grm/Sqm having softening point not less than 150 degree centigrade, having tensile strength of 650 N/5cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch on application including minimum 10cm side over lap and 15 cm end lap applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.20 Kg/Sqm finished with solar reflective bituminus paint/primer @ 0.10 kg per sqm all as specified and directed by Engr in charge.
Supply only water proofing compound complete all as specified and as directed.
S&F steel water tubing galvanised medium grade 15 mm bore, with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.
S&F steel water tubing galvanised medium grade 20 mm bore, with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.
S&F for Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including20 mm ball valve high prressure of PTMT with epoxy coated alu rod & high density plastic ball complete all as specified
S&F in repair 20 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed.
S&F mirror of size 800 mm X 600 mm , 5 mm thick glass mirror with double coat for protection and longevity, decorative PU frame and silver plating on the back for better reflection all as specified and directed by Engg-in-Charge. Make: CERA, Cat No;B3510132 or equvalent Atul/Swastik/Saint Gobian/Modi
S&F Stainless steel soap dish of approved make all as specified and as directed. (Make: CERA Cat No. F5002106) or equvalent Hindware/Parryware/Jaquar
S&F 15 mm bore pillar cock with swan neck spout and aerator (right) chromium plated all as specified and directed by Engg-in-Charge.(Make: CERA Cat No:F2004105) or equvalent Seico/Gem/Marc/Jaguar
S&F for soap dispenser with push type Make: CERA Cat No:F5002111 or equvalent Gem/Seico/Jaquar
S&F CP 2 way bib cock with all accessories all as specified and directed by Engg-in-Charge. Make: CERA Cat No:F1014161 or equvalent Seico/Gem/Marc/Jaquar
S&F 15 mm bore angle cock with wall flange all as specified and directed by Engg-in-Charge.. Make: CERA Cat No:F1014201 or equvalent Seico/Gem/Marc/Jaquar
S&F in repairs CP health faucet POM with wall hook and 1.2 metre SS braided hose pipe with all accessories Make: CERA Cat No:F8030401AB or equvalent Seico/Gem/Marc/Jaquar
S&F snow white Vitreous China wash down water closet pan of size 705x370x770 (Pedestal Pattern) white including S trap ,including white plastic seat cover with mild steel CP hinging device, flush pipe complete jointing, connecting and making good the disturbed surfaces. Make Cera Cat No : S1013119(CHRISTINA) with S trap or equvalent Hindware/Parryware/Johnson
S&F vitreous china wash basin snow white of size 610x510mm with pedestal including brackets, including 32 mm dia waste coupling and waste pipe fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed. complete.Make Cera Cat No : WHB S2040122(Canton) & Pedestal Cat No : S2090107 or equvalent Hindware/Parryware/Jaquar
S&F Brass Chromium plated fancy type towel rail, including brass CP brackets complete all as specified and directed by Engr-In Charge. Make Cera Cat No ; F5002105 or equvalent Prayaz/Ess Ess/Jaquar/Kich
S&F corner glass self CP brackets complete all as specified and directed by Engr-In Charge. Make Cera Cat No ; F5005101 or equvalent Prayag/Ess Ess/ Jaquar/Crown
S&F single lever wall mixer (3 in 1) with exposed shower spout fitted with overhead rain shower and 1.5 metre flexible stainless steel hose complete all as specified and directed by Engr-In Charge. Make Cera Cat No ; F5005102 or equvalent Seico/Gem/Marc/Jaquar
S&F toilet paper holderwith flap guard ncluding brass CP brackets complete all as specified and directed by Engr-In Charge. Make Cera Cat No ; F5004110 or equvalent Prayag/Jaquar/Marc/Gem
S&F PVC connections 15 mm size with of length 600 mm complete all as specified and as directed.
S&F 75mm PVC (SWR) pipe single/double socket in any length with rubber ring joint, laid in trenches or in floor complete all as specified and as directed
S&F 110 mm dia PVC (SWR) pipes ingle socketd, in any length with rubber ring joints laid in trenchesor in floors complete all as specified and as directed
S&F PVC (SWR) bend with access door 110 mm bore.
S&F PVC (SWR) bend 110 mm bore.
S&F PVC (SWR) 75mm bore bends any radius with access door.
S&F PVC (SWR) 75mm bore bends any radius.
S&F 110 PVC sanitary conncetion for WC complete all as specified.
S&F (SWR) 75mm dia floor trap,plain with grating incl jointing with solvent cement complete all as specified and directed by Engr-In Charge..
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc
Demolition of brick or stone/boulders masonary, built in cement morter.
Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above GL complete.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed by Engr-in-Charge.
M&L for providing, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in roof kerbs, padding or mud stops, rounded or chamfered on edges all as specified and directed
M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction all as specified and as directed.(Note : WPC shall be measured and paid separately as supply only under relevent item)
S&F welded steel wire fabric supplied and fixed complete to wood or steel members complete all as specified and directed.
S&F mild steel, plain, black sheet t in hearths;covering to door shutters; covering to doorchowkats (frames);chullah hoods; watertanks; water troughs;ducts; urinal troughsand funnels, etc. cut tosize edges beaded ifdirected,holes punched;including round headedscrews, clout nails orrivets and fixed to woodor steel members, etc.,with plain 40 mm lapjoints or welded/riveted seams includingbending, turning up,mitred angles, stoppedends, outlets, etc. as required.
Dismantling of PVC/AC drain pipes of 100mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as specified and as directed
S&F PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to walls.
S&F 100mm dia cast iron floor floor trap, with grating including jointing solvent cement to waste pipe fixed in cement concrete type B-1(1:2:4) complete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement etc complete all as specified and as directed.
S&F PVC (SWR) T equal or unequal 110 mm bore complete all as specified and as directed.
S&F PVC (SWR) double (Single Y) branch piece, with access door 110 mm bore complete all as specified and as directed.
S&F PVC (SWR) Branch piece single equal or unequal with access door 110mm borecomplete all as specified and as directed.
Dismantling of PVC/AC drain pipes of 75mm bore, including all fittings, jointed in cement mortar and taking out of trenches, if required and removing from site of work complete all as directed.
S&F PVC (SWR) pipes single socketed 75 mm bore in any length with rubber ring joints fixed to walls complete all as specified and as directed.
S&F PVC (SWR) junction single (Single T) equal or unequal 75mm bore complete all as specified and as directed.
S&F PVC (SWR) 75mm bore vent cowl complete all as specified and as directed.
S&F PVC (SWR) Branch piece single equal or unequal with access door 75mm bore complete all as specified and as directed.
S&F in repair stack clamps for 100mm bore pipes, out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F in repair stack clamps for 75mm bore pipes, out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
Taking up or down 15mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
Taking up or down 20 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
Taking up or down 25 mm d ia GI Tubing and connections including cleaning for refixing or removal to store complete all as specified.
S&F 25 mm bore GI tubing med grade galvanished with all ftgs and fixed complete to walls & floors etc
S&F in repair 25 mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed.
M&L for preparation of old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and as directed.
M&L for preparation of new plastered surfaces of ceilling and applying two coat of white wash complete all as specified and as directed.
M &L for preparing old plastered or un plastered surface of walls and applying two coats of Cement base paint on walls through mechanical means complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store.
Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n/exe 1.50 Sqm each complete.
S&F Virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, infloors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match including 15 mm th screed bed in cm 1:6 all as specified and directed
S&F Virified Ceramic tiles 8-10 mmthick (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in Skirting etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match including 10 mm thick cement plaster 1:4 all as specified and directed
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
M & L for 8 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements) all as specified and as directed.
S & F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (min), with grating and union for discharge pipe including flushing system, flush pipe & wate pipe) all as specified & directed.
S&F in repair PVC valveless 10 litre capacity syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engr-in -Charge.
S&F in repair Vitreous china wash hand basin, Vitreous china white, flat back, size 550 x 400 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand,waste coupling and 32mm dia PVC waste pipe incl 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-In-Charge.
S&F 110 PVC sanitary conncetor for WC complete all as specified.
S&F in repairs 15 mm bore fency type CP bib taps cast copper alloy with crutch or butterfly nuts , handle, screwed down for iron pipe.
S&F & repairs, 15 mm bore CP stop/angle valve cost copper alloy screwed down , high pressure with crutch or butterfly handle fency type complete.
S& F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-In-Charge.
S&F PVC (SWR) 110mm bore vent cowl complete all as specified and as directed by Engr-In-Charge.
M&L for preparation of old plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant paint over 3mm thick wall care putty paint through mechanical meanscomplete.
M&L for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primig paint paint through mechanical means complete
S&F Kosmo care wall mounted flip up aluminium grab bar rails 23.6 inch toilet hand rails/abathroom safety bars hand support all as specified and directed
M&L for 75 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in flooring or pavings etc all as specified and directed
M&L 25mm thick mastic flooring incl aggregate ,lime powder and bitumen etc as per manufacturer instructions over PCC complete all as specified and directed by Engr-in -Charge.
Removing building materials etc. (other than spoil payable under items -earthwork) to a distance of 30.00 Km or above, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
S&F U Shaped with wall and floor mounting 600x100mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210101 all as specified and directed
S&F hand rail wall mounted hinged hand rail 600x100mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210102 all as specified and directed
S&F L Shaped grab bar wall mounted inverted 'L' shaped grab bar with 500 and 700mm long mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210103 all as specified and directed
S&F corner grab bar wall mounted corner grab bar with 500 and 600mm long mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210104 all as specified and directed
S&F grab bar wall 350mm long mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210105 all as specified and directed
S&F grab bar wall 600mm long mm SS bars with anti slip coating idealy for elderly and specially abled people of Make Cera : Cat Part No B2210106 all as specified and directed
S&F Side Panelling of GI galvanised iron box panel framework of 24 gauge perforated to an extent of 70% and of 4" thick box panels of (8'x1') in dimension. Thepanels with 4" (100MM) thick box panel should have infill acoustic material density varies from 48 & 16kg/cum (glass wool as acoustic material). The Material should have the ability to attain 60% insertionloss and attenuate incident sound energy from frequencies that are concentrated in the 100 to 10k hertz range to meet the ANSI standards. The external surface having cladded with noise reduction co efficient rated fabric & the encapsulated panels will be secured to floor with mild steel track frame work made up of16 gauge of U channel approx size (20mm x 105mm x40mm) and fasteners complete.Ceiling Panelling: Ditto all as per item above, theceiling angle will be secured to the loft cupboard framework. The angle will be mild steel L frame work (16-gauge mild steel powder coated L angle 50 x 50mm insize) to support the ceiling panel. Material standard:GISheetSpecs:JSW/JINDAL/TATA Alloyed coatingcontaining zinc and about 55 % aluminium. ● Productshave heat resistance and heat reflection property of aluminium in addition to corrosion resistance of zinc andaluminium. ● Surface is attractive white silver. ISO 26642:2010 MS(Mild Steel) JSW/JINDAL/TATA Appropriate frameworkto be made & powder coated to .80-.90 micron Glass wool Spec: Twiga/ Rockwool/Insul. Its would be FRrated & with appropriate NRC as specified. ISO 630-6:2014
S&F ceilling of GI galvanised iron box panel framework of 24 gauge perforated to an extent of 70% andof 4" thick box panels of (8'x1') in dimension. Thepanels with 4" (100MM) thick box panel should have infill acoustic material density varies from 48 &16kg/cum (glass wool as acoustic material). TheMaterial should have the ability to attain 60% insertionloss and attenuate incident sound energy fromfrequencies that are concentrated in the 100 to 10k hertz range to meet the ANSI standards. The external surface having cladded with noise reduction coefficientrated fabric & amp; the encapsulated panels will be secured toceiling angle will be secured to the loft cupboard framework. The angle will be mild steel L frame work (16-gauge mild steel powder coated L angle 50 x 50mm insize) to support the ceiling panel. Material standard:GISheetSpecs:JSW/JINDAL/TATA Alloyed coatingcontaining zinc and about 55 % aluminium. ● Productshave heat resistance and heat reflection property of aluminium in addition to corrosion resistance of zinc andaluminium. ● Surface is attractive white silver. ISO 26642:2010 MS(Mild Steel) JSW/JINDAL/TATA Appropriate frameworkto be made & powder coated to .80-.90 micron Glass wool Spec: Twiga/ Rockwool/Insul. Its would be FRrated & with appropriate NRC as specified. ISO 630-6:2014
S& F Floor: 6 mm thick loop pile carpet, the materialattenuates the low frequency waves 50 to 8k Hz andless interference from low frequency sound.Material Standard:Carpet: Loop Pile of 6mm thick ISO 4919:2012
S& F door with Door Frame: Door frame made up to 19mm & 24mm thick plywood box type size approx (50mm x 300mm) with infill of acoustic material, cladded with a layer of foam and 3 mm thick fabric. The groove to facilitate perfect sealing of the door shutter Door: Door shutter made up of 12mm thick plywood(double layer) insulated internally and externally withfoam and covered 3mm fabric. The rate includes suitable door handle, lock and necessary hardware Note: Double doors and single door frameworks constitute this requirement.Material standard an ISO : Clas 1/ 12465:2002 best in class: with anti-termite & amp;marine proof.Glass wool Spec: Twiga/ Rockwool/ tranquil/Insul. Its would be FR rated & with appropriate NRC as specified.STC 40
Supply and installation steel grease trap at MNS mess made of stainless steel (304 Grade) of size (1200mmx600mm600mm grease trap of 304 grade outer wall 1.5mm thick SS 304 grade,partition 1.5/1.2mm thick SS 304 grade, top doors 1.5mm incl inletand outlet 110mm dia (SS 304 flange) and all plumbing work incl excavation, providing concrete bed 100mm thick construction of wall @ floor level using hollow bricks and covered with 5-6mm thick chequered plate etc and connection to existing line etc all as specified complete . Note : Grease trap Cap - 800 ltr Oil cap - 60 kg Solid waste Cap - 70 kg
Supply and installation steel grease trap at patient mess made of stainless steel (304 Grade) of size (2400mmx900mm1500mm grease trap of 304 grade outer wall 1.5mm thick SS 304 grade,partition 1.5/1.2mm thick SS 304 grade, top doors 1.5mm incl inletand outlet 110mm dia (SS 304 flange) and all plumbing work incl excavation, providing concrete bed 100mm thick construction of wall @ floor level using hollow bricks and covered with 5-6mm thick chequered plate etc and connection to existing line etc all as specified complete . Note : Grease trap Cap - 800 ltr Oil Cap : 200 Kg Solid Cap : 400 Kg
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick masonary, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-
One light controlled by one single pole 5 Amps switch
One Exhaust fan point controlled by one single pole 5 Amps switch
One 3 pin switch socket out let point 5 Amps switch on independent board
One 3 pin switch socket out let point 5 Amps switch on same board
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 2.50 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in existing stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chasis/ groove cutting shall be measured and paid separately under relevant items.
Point wiring with cable of PVC insulated FRLS copper multistranded conductor 4.00 sqmm 1100 volts grade in and including medium grade 20 mm dia PVC Conduit Pipe ISI marked with all accessories and fixing arrangements concealed in Stone walls / brick masonary walls /ceilings / floors etc by cutting chasis in stone/ brick machinery, including fixing top cover /PVC /MS Modular type junction boxes fixing in Stone walls / brick masonary walls for housing switches/sockets/ regulators etc. with and including 2.50 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :- NOTE : Chasis/ groove cutting shall be measured and paid separately under relevant items.
Supply and fix Modular switch , 1 Module single pole one way 10 Amps.
Supply and fix Modular switch , 1 Module single pole one way 16 Amps.
Supply and fix modular socket , 2 Module 6 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.
Supply and fix modular socket , 2 Module 6/16 Amps, 2/3 pin, 240 volts Ac 2/3 pin combined all as specified and directed at site.
Supply and fixing of modular white cover plate with frame, 3 module
Supply and fixing of modular white cover plate with frame, 4 module
Supply and fixing of modular white cover plate with frame, 6 module
Supply and fixing of metal flush box 3 module
Supply and fixing of metal flush box 4 module
Supply and fixing of metal flush box 6 module
Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals all as specified and directed.
Supply and fixing suspension LED light fitting, 36watt classic styling with cutting edge technology to provide quality illumination and superior optical control, including connecting up with twin core flexible copper conductor cable all as specified and as directed. Make : CROMPTON Model No TREND I, CAT NO : LCPL54-36- CDL or Equivalent in Havells, Indo asian, standard
Supply and fixing LED lights fitting 1x 10 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed.
Supply and fixing of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps
Supply & fixing of PVC Fresh air Exhaust fans AC single phase 230/ 240 V of size 250 mm sweep , 1325 RPM, with louver, Make : Bajaj, Model : Maxima DX, or equivalent in HAVELLS/ CG/ PHILPS
Supply & fixing of Wall mounted fan 450 mm sweep, of size, AC single phase 230/ 240 Volts Make : BAJAJ, Model no MIDEA BW 2200 WALL FAN, CAT NO : 60139 or equivalent in HAVELLS /WIPRO/ POLYCAB /CG / PHILPS
Supply and fix sub main wiring with Two single core FRLS PVC insulated cable with copper conductor multistranded 1100 volts grade 6.00 sqmm in and including suitable size of non-metallic rigid PVC conduit & accessories, fixing arrangements concealed fixed in stone wall, floor or ceiling etc by cutting chasis in existing stone/ brick masonary inc 6.00 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly complete all as specified and directed. Note : One run of earth continuity conductor,one run of PVC Conduit and two runs of copper conductor together taken as one length for measuring unit length.
Material and labour for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mmdia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indiacted including testing on completion.
Earth Continuity Conductor or main earthing lead fixed to wall on batten or recess or chasis or buried in ground or drawn in conduit / pipe or fixed for earthing etc. of size 4.00 mm dia galvanised iron or steel wire all as specified and as directed.
S&F Sheet metal enclosure for DB's double door SPN, 8 ways when MCBs to be used single pole and neutral,deep drawn with 200 Amps rated copper bus bar 240V, complete all as specified and directed. Including taking down old unsv from exiting place.
S&F MCB SPN, 40 Amps, 415 V, C- series with breaking capacity of 10KA complete all as specified and directed.
S&F MCB SP, 6-32 Amps, 240V, B- series with breaking capacity of 10KA complete all as specified and directed.
Supply and fixing of LED 25 WATTS BUILDING SECURITY LIGHTS, Make : CG, Model : FREEDOM NEO, CAT NO : LSTS-25 CDL-M or equivalent make in BAJAJ/HAVELLS / WIPRO
Supply and Fixing of Geyser 25 Litres Capacity Suitable for high pressure upto 8 bar, 2 Kilowatts, Powder coated metal body, Temperature indicating dial, fire retardant cable, Efficient long life Copper heating element, Shock proof & Rust proof ABS body, 5 Star rated, including provision of PVC/ Metal Hot & Cold pipes for inlet & outlet connection from geyser. Complete all as specified and as directed. Make BAJAJ, Model : CALDIA, CODE : 150756 or Equivalent make in HAVELLS/CG/RACOLD
Supply & fixing of water tubing 25 mm dia GI pipe , medium grade, galvanized, in trenchesor fixed on walls/ floors/ roofs etc with and including provision of all connected fittings complete
Supply & fixing of Gun metal gate valve, heavy duty, screwed both ends with iron wheel head suitable for following sizes of 25 mm bore GI water tubing including provision of necessary unions, nipple, collar etc. and taking down existing un-serviceable gun metal gate valve alongwith GI unions, nipple and collar including cutting the old threaded portion of GI pipe and making new threading in position
Supply,install,testing and commissioning of hi wall mounting air cooled inverter split type Air conditioner units complete with cordless LCD remote control unit and with turbo cool,stabilizer free operation,energy saver,anti corrosive blue fins for protection in built air ioniser and plasma filter for better indoor air quality with 5 star rating and the out door unit will be fixed in open space with proper foundation or on wall with proper fixing/supporting stand arrangements including 3 mtr suction & discharge refrigerant copper pipe line with high EER of 1.5 TR Capacity complete all as specified and directed. Make BLUE STAR Model no-DNU or equivalent model in O general/Carrier.
Material and labour for wiring for submain wiring along with two single core PVC insulated FRLSH copper conductor of size 4 sqmm and earth wire of size 4 sqmm incl in PVC casing caping on surface/ recessed as required all as specified and directed.(Note: All three run cable treated as single run.)
Supply and fixing of sheet metal enclosure with socket plug top and neutral enclosure with a two pin and earh plug and socket complete with one SPN MCB 20 Amps 'C' curve type, complete all as specified and directed.
Supply and fixing of MCB SP 32 Amps 'C' Curve type 10 KA 240 Volt complete with connection and testing all as specified and directed.
Supply and fixing of copper tubing for refrigerant suction line of Split AC of size 19.05 mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects, complete all as specified and directed.
Supply and fixing of copper tubing for refrigerant suction line of Split AC of size 9.5 mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects, complete all as specified and directed.
M & L for cutting of existing stone masonry wall for crossing the suction, discharge pipe line and electric line connection of split type Air conditioner and after the connection necessary cement work will be done for making the surface as good all as specified and directed.
S & F inreplacement heat insulation superior quality nitrile rubber of 9 mm thickness, ISI marked for copper tubing of any size of refrigerant line including necessary clamps,PVC tape knots,in all respects complete all as directed by Engr-In-Charge.
S & F AC drain hose outlet PVC pipe of standard size 20 mm complete all as specified and directed.
M&L for point wiring complete with 1.5 Sqmm single core multi stranded copper conductor fire retardant PVC insulated and un-sheathed cable 650/1100 volts grade drawn through and incl medium duty pvc rigid conduit of size 20mm dia with wall thickness not less than 1.6 mm,surface wiring on wall with all accessories like bends,tees,elbows, junction boxes etc,concealed sunken type cast iron / MS box of suitable size with white coloured hylam sheet of 3 mm thick as top cover & fire retardent PVC insulated unsheathed copper conductor wire of 1.5 Sqmm as a contineous earth wire connected to earth dolly fixed on wall surface/ceiling complete one light point controlled by one switch.
All same as item No 175 but for independent board 5 Amps five pin socket.
Supply & fix switch piano flush button SP one way 5 Amps, 240 V all as specified and as directed
Supply & fix socket outlet 2 in 1, 5 Amp ,flush type universal all as specified and as directed
Supply and fixing LED round light fitting,15 watt Surface mounted with polycarbonate diffuser & integrated electronic driver including connecting up with twin core flexible copper conductor cable with suitable size all as specified and as directed.
Supply and fixing LED light fitting, 20watt,220V AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
Supply & fixing exhaust fan made of sturdy engineering PVC exhaust fan complete with louvers shutter , voltage 230V , 50 Hz, RPM 1200, copper winding of sweep 300 mm with necessary fitting,bolt,nuts and washer connecting up with ceiling rose with 3 core flexible cable including necessary arrangement for making addtion/alteration for fixing of exhaust on wall / MS frame/wooden frame etc all as directed.
Sri Vijalakshmi Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .