Urgent up gradation of 7.5 HP to 10 HP Monoblock Booster Pump along with Panel board and Construction of concrete foundtion at Baracho Hospital V P Cuntorim in Curtorim Constituency

Supplying, Installation, Testing and Commissioning of 10HP/7.5K.W monoblock booster pump model KDS-1040+ of Kirloskar or equivalent make, 3 Phase 415 Volt, 2900 rpm, suction/delivery pipeline size 80mm x 65mm, head range 11 to 39 meter, discharge 50.00 c.um/hr/14.00 LPS.

Construction of new foundation for installation of new 10HP monoblock booster pump as per the standard base frame provided to pump. The foundation to be provided as per the space availability and site condition work involves dismantling/demolition of existing pump and foundation, excavation, rubble packing, P.C.C, centering shuttering, plan concrete (1:1.5:3), accessories like packing, nut bolts, foundation anchor fastener etc. the work to be carried out as per the direction of Engineer In Charge.

Supply, installation, testing and commissioning of indoor type LT main panel board suitable for 10HP motor pump set with all accessories like star/delta starter, three phase departmental energy meter fixed outside or proper arrangement made to read the reading and sealed. The panel body made up of 16/14 SWG CR sheet fabricated duly power coated in Siemens grey shade and mounted on suitable size M.S angle frame and installed on the floor firmly using cement concrete or anchor fastener nut bolts etc. i) 40 Amps, 3P MCB for incomer 1 No. iI) 32 Amps, 3P MCB for starter 2 Nos. iii) 22 Amps, 3P contactors 6 Nos. iv) 9-15 amps over load relay 2 Nos. v) Timer for star/Delta 2 Nos. vi) Volt meter digital with VSS 1 No. vii) Ammeter digital with ASS 1 No. viii) CTs for Ammeter 3 Nos. ix) RYBindicator set 3 Nos. x) ON/OFF indicator set 2 Nos. xi) ON/OFF push button set 2 Nos. xii) 5KVAR capacitor 2 Nos. xiii) 16 Amps MCB for capacitor 2 Nos. xiv) 18 Amps 3P contractor for capacitor 2 Nos. xv) Single phasing preventer 2 Nos. xvi) Dry run protection 2 Nos. xvii)Selector Switch 1 Nos.

Providing and installation of diaphragm mechanical pressure gauge of 50mm dia dial size on to suction and delivery pipeline with all suitable fixtures. All as directed by the Engineer in charge.

Supplying at store or site of work including railway freight carting loading unloading stacking etc. C.I. Reflux valve conforming to IS:5312 part-I. Valve double flanged ends without bypass arrangements and drilled to IS:1538 part IV & VI bearing ISI Certificate mark TYPE P.N. 1.6 (Class B);Dia in mm;50

Supplying at store or site of work including railway freight carting loading unloading stacking etc. C.I. Reflux valve conforming to IS:5312 part-I. Valve double flanged ends without bypass arrangements and drilled to IS:1538 part IV & VI bearing ISI Certificate mark TYPE P.N. 1.6 (Class B);Dia in mm;150

Supplying at store or site of work including freight transit insurance carting loading unloadingstackingetc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400/15 500/7 or equivalent grade as per IS 3896 part 2-1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163-89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;80

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;80

Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;150

Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming V edge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate;Tees bends reducers