Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.3 LAccepted-Finance | ₹1.3 L | L1 | Accepted-Finance Lowest |
| 2 | L2₹1.5 L+₹20,358 (16.1%)Rejected-Finance | ₹1.5 L+₹20,358 (16.1%) | L2 | Rejected-Finance Other then Lowest |
Tender Value
₹2.0 L
EMD Value
₹6,000
Closing Date
26 Jun 2026, 11:00 amClosed
Executive Engineer
Civil Division, PDC Khaltsi
Minor Repair Works at Hanu SHEP Complex including Allied works.
2026_PDNRE_19071_1
E tender No 4
Open Tender
Civil Works - Others
Item Rate
45 days
Hanu SHP
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Yes
Payable To Accounts Officer
₹6,000
21 Jul 2026
16 Jun 2026
27 Jun 2026
16 Jun 2026
26 Jun 2026
16 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately. Powder coated aluminium (minimum thickness of powder coating 50 micron): Taking weight of aluminium frame section as 1kg/m: 135 x 1 = 135 kg POWDER COATED ALUMUNIUM (IVORY COLOUR) | 135 | Kg | 662.11 | ₹89,385.12 |
| 2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron):Taking weight of aluminium frame section as 1kg/m POWDER COATED ALUMUNIUM (IVORY COLOUR) | 35 | Kg | 786.1 | ₹27,513.64 |
| 3 | Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and
aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). A 2.5 mm thick aluminum sheet generally weighs approximately 6.75 to 6.85 kg per square meter. For 10sqm = 10x 6.75= 67.5 | 67.5 | Kg | 913.4 | ₹61,654.23 |
| 4 | Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. | 1 | each | 588.91 | ₹588.91 |
| 5 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. | 15 | metre | 141.81 | ₹2,127.18 |
| 6 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness. | 9 | Sqm | 2,113.33 | ₹19,019.98 |
| 7 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick
& 2100 mm long with SS screws etc .complete as per direction of Engineer-in-
Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar. | 4 | each | 835.66 | ₹3,342.64 |
| 8 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | 2 | each | 78.54 | ₹157.08 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
BOQ_45475.xls
BOQ • 0.38 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .