Construction of One 50 MT Godown and Office Building at Gautami SCS at Gautami

E/W excavation for foundation in Hard soil with an initial lead and lift including rough,dressing & levelling complete.

Sand filling in found. & plinth with well watered and rammed with all cost,conveyance,royalty etc. complete.

PCC (1:3:6) with 40 mm HG(hb) metal in found & plinth all etc. complete.

Plain cement concrete (1:2:4) nominal mix in foundation as per Drawing and Technical Specification

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in plinth and foundation including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Superstructure including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete

Above 3mtr height

RCC M20 grade with 20mm & down graded 10mm chips with all cost,conveyance royalty etc. complete..

RCC M20 grade with 20mm & down graded 10mm chips with all cost,conveyance royalty etc. complete..

Grade Beam

Column Base

Column

above 3.0mtr ht

Lintel

Wall beam above 3.0mtr ht

Chajja

Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete.

Rigid Smooth centering and shuttering for RCC work and dismentling them after casting etc. complete.

R.C.C. fdn., plinth bend, column base, mass oncrete, precasted slab etc.

Lintel bend

Beam/Column

Slab/Chajja

16 mm thick C.P in C.M(1:6) over brick work with all cost,conveyance royalty etc. complete.

Inside above 3.0mtr ht

12 mm thick C.P in C.M(1:6) over brick work with all cost,conveyance royalty etc. complete.

Out side above 3.0mtr ht

6 mm thick C.P in C.M(1:4) to RCC surface etc. complete.

12 mm thick cement plaster (1:4) finished smooth with cemenmt punning in Ground Floor

2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete.

12mm cement plaster (1:4) for brick work with cement punning for skriting

Finishing wall with water proofing cement paint of approved shade on new work two coats excluding cost & including of paint.

2.5 cm thick AS Flooring (1:2:4) with 12mm & down grades size hard granite crusher broken chips on new work in Ground Floor

Supplying, fitting and fixing of MS shutter Door & Window

Supplying fitting & fixing of steel ventilator glazed composite with MS grill outside iron frame with glass pairs including supplying & fixing of putty & wire clips, screw & nails & cost of materials.

Supplying , fabrication, fitting, fixing & erection of MS tubular truss & purlin including all cost, conveyance etc complete.

Manufacturing supplying (50mmX100mmX50mm) 5mm C chhanel purlin, runner & fender to purlin band (Angular) including fabrication & fixing in position including all cost etc.

Cost, supplying and labour for fixing of anticorrossive zinc aluminium alloy painted coloured steel roofing profile sheet of 0.45 mm thick in roof of godown including fixing of ridge caps with fasteners of approved specification etc complete but excluding cost of fasteners including drilling holes etc. complete

Supplying fitting & fixing of holding down bolts (600mmX20mm) & base plate of 8mm thickness including all cost labour etc. complete

Painting 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete

Priming one coat with wall based primer including cost of primer etc complete.

above 3.0 mt. ht

Wall painting 2 coats with plastic imulation paintof approved shade on old work 2 coat to give an even shade including cost of paint.

above 3.0 mt. ht

Wall painting 2 coats with Weather Coat paintof approved shade on old work 2 coat to give an even shade including cost of paint.

above 3.0 mt. ht

Antitermite treatment in foundations trenches, flooring with approved chemicals including the cost of materials & labour.

Labour charges for fixing glass strip of depth 0.05m in joints in floor including cost of glass per 1.0mtr

Supplying ,fitting and fixing vertrifed tiles in floors,treads or steps of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 cource sand) and filling joints with white cement of approved quality including cost of materials, labour T&P etc required for the work all complete

Supplying ,fitting and fixing vertrifed tiles in floors,treads or steps of size 600mm x 600mm of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 cource sand) and filling joints with white cement of approved quality including cost of materials, labour T&P etc required for the work all complete

Fixing glazzed tiles (30cmx30cm / 40cm x 40cm special plain/printed series ceramic tiles of premium grade having thickness 7 mm to 8mm confirming to IS 13755) in floors treads or steps and landing on 20 mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost of tiles.conveyance, taxes & royalties of all materials, labour with T&P complete in all respect.(Data for 10 Sqm )

Fixing glazzed tiles (20cmx30cm / 20cm x 20cm special plain/printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including cost of tiles.

Manufacturing, supplying, fitting and fixing MS doors & windows & frame made out of 35mmx35mmx6mm size MS angle iron of approved design including cost, conveyance, taxes with all lbour charges required for the work.

Supplying, Fitting & Fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixing.

Cost , supplying, fitting & fixing of bathroom fiber door of approved make including fibre choukatha all GI fitting all cost conveyance etc complete

Provision for Display board,photo

Please Enable Macros to View BoQ information