PERIODICAL SERVICES, REPAIRS TO JOINERY AND ROOF TREATMENT TO MD AND OTM ACCN AND CERTAIN REPAIR B/R WORKS SERVICES AT ZONE C (INS PALLAVA) UNDER GE NAVY CHENNAI

Amount

Taking down cement plaster on brick walls including racking out joints, hacking for key, scrubbing down with water etc Complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth Complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finshed surfaces fair and even (Note :- WPC will be measured separately). Complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15 mm thick in two layers 10 mm thick backing coat in cm 1:6 and 5mm thick finishing coat in cm 1:4 . mixed with water proofing @ 2% by weight of cement finshed Rough cast Plaster (Note :- WPC will be measured separately). Complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement Complete all as specified and directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion over coat of primer and putty on surfaces of walls Complete all as specified and directed by Engineer-in-Charge.

M&L preparation of newly plastered wall surfaces and applying three coats of white wash Complete all as specified and directed by Engineer-in-Charge.

M &L applying new walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) newly plastered or unplastered wall surface including preparation of surface,Complete all as specified and directed by Engineer-in-Charge.

M &L applying two coat of cement based paint over a coat of primer alkali resistance on newly plastered or unplastered wall surface including preparation of surface,Complete all as specified and directed by Engineer-in-Charge.

Preparing newly plastered surfaces of celings and applying three coats of white wash Complete all as specified and directed by Engineer-in-Charge.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces and applying one coat of colour wash complete all as specified and directed.

Preparation of old decorated wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall over 10 cm grith or width surfaces any applying one coat of Synthetic Emulsion paint complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered Rough cast wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Preparation of old decorated/ plastered or unplastered wall surfaces any applying one coat of cement base paint complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sqm Sqm each

Taking down Shutters of any description exc 1 sqm but not exc 2 Sqm each

Resecuring or easing and adjusting without taking down shutters of any description not exceeding not exc 1 sqm each

Resecuring or easing and adjusting without taking down shutters of any description not exceeding exc 1 sqm but n exc 2 sqm each

S&F secound class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood lipping all as specified.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated.

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (without sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b).

S&F PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with MS squre tube complete all specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded prelam PVC sheet (both side ) 'C' channel having a PVC sheet strip in 20 mm width strck inside with solvent cement for stiles and rails ( feather edges ) pre Lam PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointing together with solvent cement suppling and fixing in the frame at site as pre-specification and drawing.

S&F in repairs 18/19 mm thick prelaminated particle board , exterior grade, prelaminated one side with decorative choice lamination and otehr side balancing wihte lamination, fixed with screws to timber frame work as in cup board shelves etc complete all as specified.

S & F powder coated aluminium frame for doors , windows etc with one or more rebates including necessary joining cleats (minimum thickness of powder coating 50 micron) complete all as specified and directed

S & F Anodised Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges,suitable handle (1 No.) complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix aluminum anodized grill DG 916 of 10 mm dia rod square, rectangular, circular or similar type of shape, aperture not exceeding 7 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778), aluminium frame with grill shall be powder coated not less than 50 micron all as specified and as directed.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing

S & F in repairs 125mm long medium weight cold rolled mild steel but hinges

S & F in repairs 100mm long medium weight cold rolled mild steel but hinges

S & F in repairs 75mm long medium weight cold rolled mild steel but hinges

S&F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed

S&F 100 mm butt hinges, medium weight, cold rolled mild steel and fixed

S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed

S & F in repairs Aluminium anodised barrel tower bolt all as above but 150mm long

S & F in repairs Aluminium anodised barrel tower bolt all as above but 125mm long

S & F in repairs Aluminium anodised barrel tower bolt all as above but 75mm long

S & F Aluminium anodised barrel tower bolt all as above but 150mm long

S & F Aluminium anodised barrel tower bolt all as above but 125mm long

S & F Aluminium anodised barrel tower bolt all as above but 75mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 150mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 125mm long

S&F in repairs extruded aluminium alloy handles fabricated types, anodised, each 100mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 125mm long

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long

S&F in repairs aluminium alloy anodized sliding door bolt 300mm long with fixing clips etc complete.

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S&F in repairs aluminium anodized hooks and eye 150mm long.

S&F aluminium anodized hooks and eye 150mm long.

S&F in repairs 150mm long Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

S & F of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

Supply and fixing towel rail 20 mm dia D type 60 cm long chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repairs Door closer hydraulically of Aluminium (extruded section body) regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S & F in repairs300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete

S&F in repair aluminium hat pegs solid body 125mm to 175mm long.

S&F in repair aluminium wardrobe hooks (single) solid body 50mm to 60mm long.

Hacking out old broken glass n.exc 1.5 Sqm (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each pane.

S & F 5.5mm thick sheet glass, ordinary quality, in squares exc 0.5 sq.m each pane.

S & F 5.5mm thick sheet glass, ordinary quality, in squares not exc 0.5 sq.m each pane.

S & F Aluminium XPM alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples

S & F in repairs Aluminium alloy wire cloth, average width of aperture 1.40mm and fixed with aluminium wire staples

Dismantling wrought iron or mild steel work of any description not otherwise provided.

M & L framed worked such as grills, grating, etc with ends of bars shoulders and/or rivited or forged into spikes, framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work confirming to Fe 290 Gde E-165.

M&L preparation of new steel surfaces of any descriptions and applying two coats of synthetic enamel paints over a coat of red oxide primer.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

S VENKATESAN (BID ID -3498579)