Installation and implementation of Supervisory Control and Data Acquisition (SCADA) in Solar Powered Integrated Micro Irrigation site of Kuhl Tapriyan, district Panchkula.

Amount

Works Details

Providing and Fixing of RTU for 10 no of valves with 3AI and 3DI signal with LORAWAN, Solar charger, rechargable lithium battery, suitable solar panel, suitable antena length and GI Pole complete as per Site Incharge - AQUA / Milesite / Advantech / Reynolds Tech.

Providing and fixing of 4` Semi Automatic Screen filter with pressure differential which will give alarm at SCADA room in case filter is choked - AQUA / Amiad / Finolex.

Providing and fixing of a double acting Continuous Air release valve with PVC Ball Valve 2` made of Plastic. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. - AQUA / Armas / Dorot.

Providing and Fixing of 4` Butterfly Valve before OMS for safety purpose. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the Hybrid plastic buffer type Butterfly Valve is 10 bar and hydraulic seat test pressure of the product is 8 bar. AQUA / Gorgefisher / SAB.

Providing and Fixing of 4` BSP Straight flow Solenoid valve, 3 way, flange end with flow control which shall be normally closed 12-24 VDC cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 10.5 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for ` tamper proof` operation. The valve shall operate with minimum 9 VDC -30 VDC at 10.5 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. Hydromat / Armas / Dorot.

Providing and Fixing of Nylon Glassfilled Modular manifold with suitable victaulic fanges and victaulic grooved coupling for 10 no of valves and other above items - Automat / SAB / Dorot.

Providing and Fixing of pressure transmitter - Dunfoss / Honeywell / Wika.

Providing and Fixing of paddle wheel flow meter - Nuclus / Flowtronics / Ztron.

Providing and Fixing of Encloser Box made of MS (MOC) 1.2mm thickness (using stiffeners). A suitable height frame to be provided to elevate from ground for maintenance. Encloser box has to be provided with tamper switch..

Providing and Fixing of 8 DO/DI relay communication card (RS485module) with ethernet cable - AQUA / Advantech / MOXA.

Providing and Fixing of base station communication device with 5 meter length antena wire and 8 DB antena - AQUA / Teklotic / Advantech.

Providing and Fixing of Router for PC and base station communication with ethernet cable - D-Link / TP-Link / Cisco.

Providing and Fixing of PC work station with 23` screen and suitable UPS.

Providing and Fixing of SCADA Software for automatic operation of system capable of operating 6 pumps, 2 solenoid valve under each distribution management system, feed back of opening and closing of valves, Discharge flow, pressure at DMS while system is in operation, ON/OFF of solenoid valves with DC latch. - Automat / Prudent / Warta.

Providing and Fixing of Pump start relay for DC pumps - Pla / Siemens / Pheonix Control .

Providing and Fixing of suitable electric cabling between pump start relays and RS485 module. - Finolex / Havells / Empire.

Operation and maintanance charges for 3 years

jaimal construction