Repair to LT external electric supply LT Cables LT OH lines LT panels and connected works at Sewar fort area and Parade ground under GE Bharatpur

Amount

M&L for attending, repair and rectification of external LT electric supply complaints on 1100 Volts grade, under ground / over head system alongwith necessary T & P, safety devices as per site requirement complete all as specified and directed:- Note for Item Nos: 1 :- (a) The contractor will be alloted complaints at MES complaint cell on daily basis on all working days and sufficient resources will be deployed by him/her for completion of day to day comaplaints within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit without intimation of sufficient cause, penalties will be recovered twice of the quoted rate for each un-attended complaint. (b) A detailed log of complaints with completion/non-completion remarks from users/MES will be maintained by the contractor and the same will be updated on daily basis in consulatation with Engr-in-Charge or JE E&M as detailed. (c) The contractor will make suitable arrangment for emergency complaints and will notify authorised rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond stated time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. (d) The contractor will intimate MES authority well in advance if electric shutdown is required during rectification of complaints. (e) The quoted rate is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station at Bharatpur. (f) The contractor will maintain location wise record of each spare utilized as per inventry format given by AGE E/M, Bharatpur and the same shall be submitted to E/M store on daily basis.

Excavation in trenches, n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for foundation/laying of cable and getting out in any type of soil complete all as specified and directed

Returning, filling in including spreading, levelling, watering and well ramming in layers n. Exc 25 cm thick complete all as specified and directed

Removing of excavated soil to a distance n. Exc 50 Mtr and depositing where directed at a level n. Exc 1.5 Mtr above the starting point complete all as specified and directed.

Supply & spread unwashed dry local available river sand for sand cushioning for covering the under ground cable in trenches complete all as specified and directed. (Note :- Punning thickness shall be measured and paid only.)

M&L for cable protection cover with sub Class`B` bricks old size laid dry, flat perpendicular across the cable in trenches complete all as specified and directed.

Supply, laying, testing & commissioning LT XLPE insulated wire/ strip armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes including taking down old unserviceable cable complete all as specified and directed:-Note;-Excavationand earth shall be measure&paid seprately 240 Sqmm 3.5 core

185 Sqmm 3.5 core

120 Sqmm 3.5 core

50 Sqmm 3.5 core

25 Sqmm 4 core

16 Sqmm 4 core

10 Sqmm 2 core

6 Sqmm 2 core

S&F in repair on existing location including taking out of existing MCCBs of following capacity adjustable with thermal magnatic release complete all as specified and directed :- MCCB 415 volts 400 Amps 04 pole 35 KA

MCCB 415 volts 250 Amps 04 pole 35 KA

MCCB 415 volts 200 Amps 04 pole 35 KA

MCCB 415 volts 160 Amps 03 pole 36 KA

MCCB 415 volts 100 Amps 04 pole 25 KA

MCCB 415 volts 63 Amps 04 pole 25 KA

MCB TPN 63 Amp 10 KA, 'C' curve"

S & F or laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 50mm bore complete all as specified and directed.

S & F or laying galvanixed steel tubing light grade (ISI marked) for protection of under ground cable on poles/walls under road crossing of size 100mm bore complete all as specified and directed.

Boring of holes under road, pavement, hard standing by trenchless technology using suitable tools and machinery for laying of pipe upto 150mm bore complete all as specified and as directed . Note :- GI pipe shall be measured and paid seperetly under respective Item

M&L for LT cable fault rectification upto 240 sqmm X 3.5/4 core by using Fault locator machine to detect fault and rectify the same incl T&P & items ie lugs,tape etc complete all as specified and directed Note: Earth work and cable jointing kit shall be measured and paid separetely.

M&L for cable jointing kit for 1.1 KV grade for straight through joint complete with jointing material and accessaries suitable for 3.5/4 core XLPE armourd aluminium conductor cable of following size including detaction of fault location .Make:3 M,Denson or equivalent complete all as specified and directed. Note: Earth work and returning filling which require in above job will be measured and paid seperataly. 25 Sqmm to 50 Sqmm

70 Sqmm to 120 Sqmm

150 Sqmm to 240 Sqmm

Scrapping & cleaning old surface of Panel box and M & L for 02 coats of painting with approved colour of synthetic enamelled paint over a coat of primer for Panel boxes , sheets , angles, canopy and legs any other section complete all as specified directed.

S&F in replacement maintence free battery 12 volts, 150 AH capacity with initial charging suitable for DG sets including connecting lead with suitable clamp and nut, blots complete all as specified and directed,

Supply and fix in repairs of Lithium base Energy efficient integrated SOlar street light of 32 watt in single FRP body duly polyurethane coating (Camouflage color), encases with monocrystalline solar PV panel of 65-67Wp,lithium battery 11.1/12.8V,33.0 AH with inbuilt BMS,IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller cum driver,automaticdimming function(First 04 hrs at full brightness & rest of the time at lower light level with PIR motion sensor), Dusk to dawn operation,suitable to working temp (-) 10C to (+) 55C ,weight not more thatn 16-18 Kg with adjustable MS clamp suitable for pole/wall mounting etc complete as reequired.Make: AXXON/HAVELLS/PHILLIPS Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint. (Excavation & earth work shall be measured separately)

M& L Earthing complete with galvanised mild steel earth electrode plate 600x600x6 mm thick buried and vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level; and including GI earth strip 32X6mm bolted by means of bolts, nuts, check nuts and washers of galvannised iron or steel all as shown in electrical plate No 3 of MES SSR Part-I connected to continuous earth lead for main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanised iron 15 mm bore medium grade pipr with all fitting form the earth electrode fixed along pole with and including 25x 6 mm flat irom clamp, bolts, nuts and washers and watering pipe shall be 20 mm bore Gl medium grade from top of the earth electrode to bottom of the earth pit including all excavation and earth work in any type of soil and removal of soil upto 50 metre, PCC pit with pre-cast RCC cover with handle, charcoal/salt, funnel , CI frame etc complete all as specified & directed. NOTE:(I) The concrete pit shall be made in PCC 1:2:4 type B-O, using 12.00 mm graded crushed stone aggregate 40mm thick precast cover slab of RCC(1:2:4), type B-1, using 20mm graded crushed stone aggregate with suitable MS handle in lieu of CI cover. Reinforcement in cover shall be of 8mm dia TMT bars laid @ 150mm c/c both ways. (ii) Item includes the cost of 7.5 metre GI pipe for protection of earth wire, Any variation in length shall be adjusted through deviation order (iii) Item includes cost of 7.5 metre earth lead wire.Any variation in length shall be adjusted through deviation order. (iv) Earth electrode shall be surrounded by adequate quantity of charcoal dust and salt to a packed thinkness of 15 cm on all sides.

AUTOMATION AND SWITCHGEAR PANELS