PROVN OF COVERED DRAIN NEAR BLDG NO. P-63, TOILET AND URINAL POINT AT JAMMU GATE AND SHED NEAR BK 14-30 COOK HOUSE OF TRG CELL AT DRC UNDER AGE I AYODHYA

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc and getting out in soft/loose soil complete as specified and directed.

M&L for PCC (1:4:8) type D2 ( using 40 mm graded stone aggregsate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel and drain complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc 6m mean radius complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4) in half brick th walls, straight or curved on plan exc 6m mean radius complete all as specified .

M&L extra for forming fair finishing to drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds etc, complete all as specified and directed. (Note:- Inner girth only be measured).

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in benching, coping, surface channel etc including use & waste of form work in any position and shape complete all as specified and directed.

M&L for providing precast reinforcement cement concrete (1:2:4) type B-1 (using 20mm graded stone agg) in manhole cover, drain cover slab etc, set in cm 1:6 placed in position incl necessary form work complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggrgate) as in sub base, sub floor and the like complete all as specified.

M&L for 60mm thick Machine pressed precast coloured (combination of red and yellow) M35 grade concrete interlocking paver block with glossy finish of any shape and size with grey cement and pigment confirming to IS 15658-2006 complete all specified and directed.

M&L for sand filling as in cushioning layer below interlocking paver tiles, laid & spread in any thickness and well compacted to a true surface complete all specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-in-Charge.

S&F 300 mm bore reinforced concrete pipes, class NP-2, laid and jointed using collar with cement joint complete all as specified and directed.

M&L for concrete bed to drain pipes in cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipe after they are laid, jointed and tested for 300 mm bore RCC pipe complete all as specified and directed.

M&L for hardcore of broken bricks or boulders n.exc 15 cm thick of gauge n.exc 63 mm, deposited, sprayed and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection / hard standing etc, finishing concrete surface even and smooth without using extra cement including making joints and filling with bitumastic in proportion of bitumen and sand (1:2) complete all as specified and directed.

M&L for 75mm thick PCC (1:5:10) type E2 (using 40mm graded stone aggregate as in sub base and the like all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick renderin in cement mortar (1:3) on fair faces of brick work or concrete surfaces a for fixing of tiles in vertical surfaces complete all as specified and directed.

Supply only integral water proofing compound of approved quality complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying further floor finishes complete all as specified and directed.

M&L for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

M&L for glazed ceremic coloured tiles /elevated wall coloured tiles of size 350x250x7mm/450x350x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in foundation, raft footing, plinth beams, bases of columns and the like complete all as specified

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in columns and the like complete all as specified

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in beams, lintels, cantilevers (other than plinth beam) and the like complete all as specified

M&L for reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, dec slabs, shelves and the like complete all as specified

Use and waste of formwork to foundation, footings, plinth beams, bases of columns and the like for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to columns and the like for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides and soffit of beams, lintels, bressumers and the like for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200mm thick complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

S&F TMT steel bars 6mm dia and over upto and including 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as in stirrups, rings and binders complete all as specified and directed.

S&F 125mm size brass chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and as directed.

S&F factory made solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed by Engineer-in-Charge.

S&F 150mm size aluminium anodised barrel tower bolts, extruded section and fixed complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel & fixed to chowkats complete all as specified and directed.

S&F 150mm long aluminium handle cast type anodised and fixed complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay including one shop coat of zinc chromate primer complete all as specified and directed.

M&L for preparing new steel surfaces of any description over 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over preprimed steel surfaces complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F 15 mm dia GI tubing, medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S&F 20 mm dia GI tubing, medium grade with all fittings and fixed to walls or laid in floors complete all as specified and directed.

S&F 15mm chromium plated two way bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F, CP health faucet with 1.00 meter flexible hose pipe and stand complete all as specified and directed.

S&F 15mm dia bore angle stop valve, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore pillar tap, fancy type, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shank and fly nut, screwed for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore PVC connection 450mm long with hexagonal brass chromium plated nuts and washers on both ends complete as specified and directed

S&F vitreous china wash hand basin, white, flat back, size 450 X 300 mm excluding taps, chain and plug and procelain stopper but including brackets, cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread) complete as specified and directed

S&F viterious china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and fixed complete as specified and directed

Supply only coloured plastic water closet seat, black closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete as specified and directed

S&F 10 ltrs PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including brackets complete as specified and directed

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipes for 20mm bore of pipe complete as specified and directed

S&F brass chromium plated tubular towel rail with hook, 20 mm dia, D type, 60 cm long between flanges and fixed complete all as specified and directed.

S&F glass shelf /corner glass diplomat assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F vitreous China white soap dish, approximate size 160x 160x90mm and fixed in position complete as specified and directed

S&F 110mm bore PVC (SWR) rain water, soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls or laid in floor complete as specified and directed

S&F 110mm bore PVC (SWR) bends of any radius complete as specified and directed

S&F 110mm bore PVC (SWR) branch piece single Y equal or Un equal complete as specified and directed

S&F 110mm bore PVC (SWR) junction single T euqual or unequal complete as specified and directed

S&F Vitreous China Urinal, Half stall type, white including 32/40mm dia 90cm long PVC waste down pipe and fixed in position complete as specified and directed

S&F PTMT urinal spreader of any colour for fixing to 15 mm dia pipe (Minimum weight 60 gms) complete as specified and directed

S&F 75mm bore PVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to walls or laid infloor complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius and fixed complete as specified and directed

M&L 75mm dia PVC floor trap with grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete as specified and directed.

Returning filling in with approved excavated soil including spreading, levelling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material (soils) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified.

S&F 1000 litres capacity rotational moulded polythene water storage tank (cylindrical vertical, with closed top), hoisted and fixed in position as specified in SSR Part I and directed.

S&F 20/25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe fixed complete all as specified and directed.

Excavating in post holes in soft/loose soil each n.exc 0.5 cum, getting out including returning filling in and ramming properly and removing surplus soil to a distance n.exc 50 m complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

S&F MS work in trusses / purlins, rafters, posts including ERW or induction butt welded tubes / hollow sections, conforming to IS-1161-1979 Gde St-240 complete all as specified and directed.

S&F MS work as in plates (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde E- 250) quality 'A' complete all as specified and directed.

S&F mild steel screw bolts (machine made) of 11 to 15mm dia with hexagonal or square head at one end and screwed the other end, or screwed both ends, each screwed end to be fitted with washer and one hexagonal screwed nut, length of bolt exc 5cm but n.exc 150cm complete all as specified and directed.

M&L for 0.50mm thick pre-painted galvalume alumunium zinc coated GI based corrugated steel sheet of any colour having tensile strength of 550MPa as in roof covering / cladding to walls, fixed with shelf tapping screws complete all as specified and directed.

M&L for 0.50mm thick pre-painted galvalume alumunium zinc coated GI based plain steel sheet of any colour having tensile strength of 550MPa as in roof covering / cladding to walls, fixed with shelf tapping screws complete all as specified and directed.

M&L for preparing new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for new concealed type point wiring for one light/fan point controlled by one, one way switch with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including non-modular type GI sunken boxes suitable for non-modular switches/sockets etc with 3mm thick hylam sheet with glossy finish including necessary cutting for fixing switches, sockets, regulators etc, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified.

S&F switch piano flush type one way 6 Amps complete all as specified and directed.

M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.

S&F epoxy powder coated MCB distribution box double door SPN 4 way for MCBs alonwith provn of MCB as incomer with common bus-bar at incoming end of outgoing MCBs grouted / flush to wall including necessary cutting and making good disturbed surfaces in cement mortar (1:4) and applying white/colour wash / paint / distemper as required to match the existing surfaces complete all as specified and directed

S&F MCB SPN 40 to 63 Amps, 230 Volts C series 10 KA, including necessary connection complete all as specified and as directed.

S&F MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position all as specified and as directed.

S&F indoor luminare batten for wall/ceiling mounting box type energy efficient saving LED BATTEN LIGHT 20 W incl twin twisted copper conductor flexible wire from ceiling rose to connector all as specified and as directed.

S&F LED light fitting mirror type withhigh out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for sub main wiring with two runs of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified.

S&F exhaust fan 300 mm sweep AC 230 volts single phase with louvers including making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size including testing complete all as specified.

His And Her Enterprises

ABC CONSTRUCTION CO

Saket Traders

Jairajyadav security services

Khan Brothers