Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC R O ABI GUZAR THE BUND SRINAGAR 190001 J K | SRINAGAR | JAMMU AND KASHMIR | 190001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹38.2 L+₹2.8 L (7.89%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹39.2 L+₹3.7 L (10.5%)Rejected-Finance R O RAWALPORA WANBAL YAIYAL TEH DISTT SRINAGAR J K PIN 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹43.0 L+₹7.5 L (21.3%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER
GE 970 EWS C/O56 APO PIN 913970
PROVISION OF REPLACEMENT OF WINDOWS OF BLDGS NO P-2, P-3, P-4, P-5, P-6, P-236, P-237 AND P-345 AT JAKLI RC UNDER GE 970 EWS
2022_MES_564083_2
GE 970 EWS-54/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 970 EWS C/O56 APO
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹85,000
Yes
6 Mar 2023
13 Dec 2022
4 Jan 2023
13 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat forfixing and including all fitting etc. (minimum thickness of powder coating 50 micron) complete all as specified and directed.
S&F powder coated anodised aluminium door, window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) (Thickness or powder coating not less than 50 micron) complete all as specified and directed.
Supply and fixing for aluminium alloy anodized (powder coated) door fame and shutters with hollow aluminium anodized section as specified, shutter (two panels) fully glazed / partly glazed or fully panelled with and including 18mm thick (both side) prelaminated block board exterior grade / 5.5mm thick tinted or plain glass including aluminium alloy anodized snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers, two numbers of aluminium alloy anodized tower bolts to each leaf, stainless steel hinges 3 Nos etc. including fixing frame to brick wall/ RCC members with rawl plugs complete all as specified and directed. Sections of doors shall be aluminium hollow sections as follows:- (a) Door frmae single groove 101mm x 44mm x 3mm thick. (b) Shutter top 83 mm x 44mm x 3mm thick. (c) Shutter bottom 114 mm x 44mm x 3mm thick. (d) Shutter vertical top 85 mm x 44mm x 3mm thick. (e) Shutter middle 83 mm x 44mm x 3mm thick. (f) Gauging clip weighing not less than 0.0978kg/metre. NOTE: (i) The rates shall be inclusive of supply & fixing of rubber packing / gasket, SS wire mesh & glass pane of sutiable size and all necessary arrangement to fixing frame with brick wall / concrete surface. (ii) The rates shall be inclusive to make good the damage portion of brick wall / concrete surface with PCC 1:3:6 & CM (1:3) to match with existing surface.
S&F 5.5 mm thick frosted sheet glass on both side, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane complete all as specified and directed
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and directed
Material & labour three track powder coated anodised aluminum frame and shutters for windows and ventilators with for anodised aluminium shutters for windows and ventilators with for anodised aluminium shutter two Nos fully glazed 5.5 mm thick tinted or plain glass with one No shutter having stainless steel mosquito proofing net 0.63 mm dia with 1.40 mm aperature with and including necessary rubber packing aluminium beading and necessary locking arrangement and powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified and directed. Sections of window shall be aluminium sections as follows:- (a) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 1.065 KG per RM. (b) Three track frame bottom and top section 92 mm x 31.75 mm x 1.3 mm thick with weight 0.929 KG per RM. (c) Shutter bottom and top 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. (d) Shutter sides 40 mm x 18 mm x 1.55 mm thick with weight 0.547 Kg per RM. NOTE: (i) The rates shall be inclusive of supply & fixing of rubber packing / gasket, SS wire mesh & glass pane of suitable size and all necessary arrangemetn to fixing frame with brick wall / concrete surface. (ii) The rates shall be inclusive to make good the damage portion of brick wall / concrete surface with PCC 1:3:6 & CM (1:3) to match with existing surface.
Material and labour for green marble work 12 to 15 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingv marble dust with admixture of pigment to match complete all as specified and directed.
Material and labour Providing edge moulding to 12-15mm thick stone of countersvanities etc. including machine polishing to edge to give high gloss finish etc complete all as specified and directed.
Material and labour PCC 1:3:6 type C-O using 12.5mm graded crushed stone aggregate as in back filling, coping, benching on corner of joints etc & for repair demage holdfast portion complete all as specified and directed.
S&F anodised aluminum Deco grill (anodised transparent or dyed to required shade accordingy to IS : 1868 with minimum anodic coating of grade AC 15) of approved design / pattern (hexagonal section or other) with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed.
Dismantling brick work or stone / boulder masonary built in cement mortar incl all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.
Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for Rendring 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for painting of plastered surfaces of walls with Acylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr / 10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg / 10 Sqm) complete all as specified and directed.
M&L for Rendring 10 mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of new plaster surface of wall and applying 2 mm thick of wall putty complete all as specified and directed.
M&L for preparation of old plaster surface or painted surfaces of wall by complete removing of existing treatment (scrubbing, washing down etc) complete all as specified and directed.
Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 25 mm dia stainless steel curtain rods including fixing arrangements, complete all as specified and directed.
S&F 25 mm dia stainless steel fancy type brackets and stainless steel fancy type finale caps etc including fixing arrangements, complete all as specified and directed.
M/S A.R.TANTARY
M/S LATIF AHMAD BABA CONSTRUCTION
M/S BASHIR AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .