REPAIR TO RETAINING WALL DRAINAGE HARDSTANDING IN THE AOR OF AGE BR-I AT GE SOUTH UDHAMPUR

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and as directed.

Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided all as specified and as directed.

Material and labour for walling random rubble, brought upto courses well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

All as per item No.4 here-in-before but except stone all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, with maximum depression on face from straight edge held against the dressed surface n exc 40 mm, as specified, of random rubble walling, uncoursed or brought upto courses all as specified and as directed.

Material and labour for racking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar complete all as specified and as directed by Engr-in-charge.

Material and labour for keyed pointing to random rubble mansonry, uncoursed or brought upto courses in CM 1:3 complete all as specified and as directed by Engr-in-charge.

Material and labour for old size brick work with sub class 'B' bricks straight or curved on plan exc 6m mean redius built in CM 1:4 complete all as specified and as directed by Engr-in-charge.

All as per ser item No 09 above but except bricks all as specified and as directed.

M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in precast cement concrete louvers & jallies 50 mm thick including all moulding but excluding frame set & jointed in cement mortar 1:4 all as specified and as directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc all as specified and directed.

M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and as directed.

Material and labour for cement concrete type B-0, 1:2:4 (Using 12.5 mm graded stone aggregates) for edging/coping complete all as specified and as directed by Engr-in-charge.

S & F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

All as per item No 15 here-in-before but except steel all as specified and as directed.

M&L for Welded steel wire fabric n,exc 4kg per sqm, supplied and fixed complete to wood or steel members all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint white or tinted over a coat of chalk whitening primer complete all as specified and as directed by Engr-in-charge.

Material and labour for preparation of old plastered surfaces of walls and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge.

M & L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide prime all as specified and as directed.

Material and labour for one coat of synthetic enamel painting on old painted steel surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling plain or corrugated steel/ fibre glass sheeting, any gauge, thickness, including Nainital or similar patter roof coverings all as specified and as directed.

Dismantling Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings all as specified and as directed.

S & F 10 mm thick PVC Polycarbonate Fibre glass reinforced translucent sheeting (any colour) fixed with coach screw and washer in roof, wall etc, with two 150-200mm side lap and aluminium strip on joints with rubber gasket/ self tapping screws all as specified and as directed.

S & F prepainted galvalume alume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 W (Gde E-250) Quality A

M&L for 100 thick PCC 1:4:8 type D-2 (40 mm graded stone agg ) as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand all as specified and as directed.

M&L for 300 x 300 x 8-10mm Parking vitrified tiles as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over 15mm thick screed bed in CM 1:4 all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc all as specified and as directed.

M&L Granite slab 20 mm thick as in steps, jambs, pillars, window cill, cooking platform and the like in cement motar 1:4 including pointing in white cement 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar beddig not backing and removing rubbish off the premises all as specified and as directed.

M&L glazed ceramic high depth punch range elevation coloured tiles 600 x 300 x 8-9 mm thick, combination of high depth matte finisih, high depth gloss finish as in vertical portion set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 all as specified and as directed.

Preparation of floor tile surfaces by washing, rubbing down, scrapping and applying two coats of 100% premium acrylic emulsion floor paint all as specified and as directed.

S&F in repairs convex mirror of 800mm dia, made of PC material provided with suitable MS pipe post of height 1.50 m and embedded in ground upto 0.60m depth with PCC 1:3:6 as per site requirement, complete all as specified and as directed.

M & L for 40mm thick Cement concrete type B-1,1:2:4 (20mm graded aggregate) as in flooring all as specified and as directed.

S & F Glass dividing strips, 3 mm thick and 38mm wide, inserted in position, conform to design all as specified and as directed.

M & L "as in repairs" for 08 layer synthetic court complete all as specified under : - (a) PRIMER: 100% Pace court concrete primer based emulsion to improve bond of acrylic court system to the concrete or asphalt surfaces. RESURFACER: Pace court acrylic Resurfacer for filling and smoothing asphalt or concrete surfaces in preparation and also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating. (b) CUSHION COAT : 3 Layers of Pace court cushion for asphalt or concrete surfaces in preparation for Acryflex ITF approved system (c) ULTRA CUSHION COAT : 2 Layers of Pace Court cushion for asphalt or concrete surfaces in preparation for Acryflex ITF approved system (d) PRECOAT: 2 layers of Pace Court based textured topcoat. Ideal for color coating courts (e) OVERLINE : 100% Pace Court based high line marking paints Make : Pacecourt or equivalent

S & F "as in repairs" stainless steel letters of size 300 x 150 (Height x Width) x 25 mm broad made upo of 304 grade stainless steel 1.5mm thick and fixed on walls with suitbale nut and bolt arrangements all as specified and as directed.

S & F in repairs reflective type vinyl background sign boards made out of stainless steel grade 304 square sections 40 x 40 x 3 mm, frame size 0.90 x 0.60m (Sign Board) and with additional vertical frame support and height from ground level to bottom of sign board frame 1.50m and 0.60m in ground including embedded with PCC 1:2:4 (using 20mm graded stone aggregates), pot hole size 0.30 x 0.30 x 0.60m including excavation earth work and removing excavated soil to a distance n exc 50m, and 3mm thick aluminium sheet, face to be fully covered with reflective sheeting (of make 3M/Avery Denision) conforming to type-IV of ASTM-D 4956-01 in blue and silver, white or other colour combination, witing letter symbols, borders as directed by Engr-in-Charge with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame all as specified and as directed.

M/S ASHOK KUMAR PACHIALA (BID ID -3410396)

RAJ MOHD (BID ID -3410155)

khajuria builders (BID ID -3410507)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3405237)

M/S R S Builders (BID ID -3404899)

M/S IMRAN MAJID (BID ID -3404559)

RAMAN CONSTRUCTION CO (BID ID -3409964)

M/S PARDEEP KUMAR (BID ID -3406741)

jyoti parkash sharma (BID ID -3410285)

M/S Ashok Kumar Jaswal (BID ID -3409296)