Rajasthan

Active

Works

Civil Works - Water Works

29/2026-27 City Div Bhilwara

PHED-Chief Engineer(HQ),Jaipur

EXECUTIVE ENGINEER. P.H.E.D. City Dn Bhilwara | Bhilwara, Rajasthan

Amount: ₹59 LCloses: 24 Sept 202616 Sept 20262d left

Timeline

Published3 Sept 2026
Closes24 Sept 202616 Sept 2026
Bid Opening24 Sept 202616 Sept 2026

Corrigenda

Corrigendum

2 updatesLatest on 16 Sept 2026Submission Ends:16 Sept 202624 Sept 2026

Date changes

Download Ends16 Sept 202624 Sept 2026Submission Ends16 Sept 202624 Sept 2026Bid Opening16 Sept 202624 Sept 2026

Tender Value

₹59 L

EMD Value

₹1.2 L

Closing Date

24 Sept 2026, 12:00 pm2d left

Tender Inviting Organisation

Name

EXECUTIVEENGINEER. P.H.E.D. City Dn Bhilwara

Address

EXECUTIVEENGINEER. P.H.E.D. City Dn Bhilwara

Work Description

Source improvement in Villge Mangrove and work of laying pipeline in horse shed and Ward 3. , Block Suwana, Disrtict Bhilwara on single point responsibility turnkey basis Under DMFT

Tender Information

Tender ID

2026_PHCJA_594609_4

Reference Number

26-29/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Period of Work

90 days

Location

EXECUTIVE ENGINEER. P.H.E.D. City Dn Bhilwara

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical

RequiredFees (.pdf)

RequiredRegistration (.pdf)

RequiredG.S.T (.pdf)

RequiredTD (.pdf)

RequiredHISTORICAL CONTRACT STAMP (.pdf)

Requiredexperience as par TD (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹2,000

Tender Fee Payable To

EXECUTIVEENGINEER. P.H.E.D. City Dn Bhilwara

EMD Fee Amount

₹1.2 L

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

24 Sept 2026

Published

3 Sept 2026

Bid Opening

24 Sept 2026

Download Starts

3 Sept 2026

Download Ends

24 Sept 2026

Submission Starts

3 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (50 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Construction of tube well from ground level and up to 100 mtr depth and above to accommodate housing assembly pipe in all type of unconsolidated formation such as pebbles, boulders, collapsible formation etc. by Odex drilling method as per IS: IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work will include lowering of housing and strainer pipe assembly and casing shoe including cost of casing shoe, but excluding cost of the casing pipe. The work would be completed after obtaining sand free water.	-	-	-	-
2	Nominal bore 200 mm dia.	100	Mtr	1,415.25	₹1,41,525
3	Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of Tube well is more than 100 mtr.	20	Mtr	1,627.54	₹32,550.8
4	Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes	-	-	-	-
5	200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)	80	Mtr	2,316.95	₹1,85,356
6	Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.	-	-	-	-
7	200 mm dia	1	Each	835.59	₹835.59
8	Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.	-	-	-	-
9	100 mm dia DI K-7	250	Mtr	1,240.68	₹3,10,169.49
10	Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.	-	-	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.47 MB

Work Item Documents

29.pdf

Tender Documents • 32.88 MB

BOQ_1055100.xls

BOQ • 0.29 MB

Corrigendum Documents

nc.pdf

PDF • 0.27 MB

yo.pdf

PDF • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Construction of tube well from ground level and up to 100 mtr depth and above to accommodate housing assembly pipe in all type of unconsolidated formation such as pebbles, boulders, collapsible formation etc. by Odex drilling method as per IS: IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work will include lowering of housing and strainer pipe assembly and casing shoe including cost of casing shoe, but excluding cost of the casing pipe. The work would be completed after obtaining sand free water.

Nominal bore 200 mm dia.

100

Mtr

1,415.25

₹1,41,525

Add 15% extra on above item for drilling depth beyond 100 mtr, If depth of Tube well is more than 100 mtr.

Mtr

1,627.54

₹32,550.8

Supply of ERW M.S. black casing pipe ISI marked (IS: 4270/2001) or amended up to date of following sizes

200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)

Mtr

2,316.95

₹1,85,356

Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug.

200 mm dia

Each

835.59

₹835.59

Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

100 mm dia DI K-7

250

Mtr

1,240.68

₹3,10,169.49

Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.