SPECIAL REPAIRS TO DRAINS AND DRAIN COVERS AT SERA AND RE-LAYING OF INTERLOCKING TILES BETWEEN MIDDLE GATE AND MAIN GATE OF DMDE SECUNDERABAD

Amount

SPL REPAIRS TO DRAINS AND DRAINS COVERS AT SERA

Cutting into existing manholes for connecting new drains of internal dia of pipe 200 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required complete all as directed.

Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary from work including demolition of existing PCC work complete all as directed.

M&L for 200mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old pipe complete all as directed

M & L for plain cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation including demolition of concrete, complete all as directed.

M & L for Brick work with sub class 'B' old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) including demolition of old brick work complete all as directed.

M & L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick/Stone or concrete surfaces, finished even and smooth without using extra cement complete all as directed.

Retuning, filling in, including spreading leveling , watering and wall ramming in laying not exc 25 cm thick complete all as directed.

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs, set in cement mortar (1:4) for manholes including necessary including demolition of old broken RCC cover, slabs and form work complete all as directed. Note:- Reinforcement required will be measured & paid for separately.

S&F TMT bars 8 mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.90 mm dia complete all as directed.

S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, type 'P' including demolition of old/damaged gully trap complete all as directed.

M & L for salt glazed stoneware drain pipe of 150mm internal dia of grade 'A' laid in trenches and jointed in cement mortar (1:2) including taking down old unserviceable pipe complete all as directed.

S&F Cast Iron soil waste and vent pipes 100mm bore in any length with or without ears, with cement joints , fixed to walls, including taking down old unserviceable pipe complete all as directed.

S & F Cast Iron soil waste and vent pipes 75mm bore in any length with or without ears, with cement joints , fixed to walls, including taking down old unserviceable pipe complete all as directed.

S & F CI bends/T/Y of (any radius) with door suitable for 100mm bore pipe including taking down old unserviceable bend complete all as directed.

S & F CI bends /T/Y of (any radius) with door cover suitable for 75mm bore pipe including taking down old unserviceable bend complete all as directed.

Drain

M&L for Brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of old brickwork complete all as directed

M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 including demolition of old brickwork complete all as directed

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as directed

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in surface channels and drains including demolition of old concrete complete all as directed.

M&L for cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) as in copings including demolition of old concrete complete all as directed.

M&L for framed work in repairs such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

RE-LAYING OF INTERLOCKING TILES BETWEEN MIDDLE GATE AND MAIN GATE OF DMDE.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal of rubbish and debris outside MOD land complete all as directed.

M & L for 75 mm thick cement concrete 1 : 4 :8 type C-2, (using 40 mm graded stone aggregate) as in plinth protection and making joints and filling with bitumen sand mastic including necessary form work.

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade, as in floors/pavings laid over 50 mm thick sand cushioning layer including dismantling existing floor tile of any description complete in all respect and all as specified. Make : NAVEEN/SPARTEK/NITCO

Excavation in trenches 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km complete all as directed.

M&L for cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in surface channels and drains bed concrete and including demolition of concrete of any thickness complete all as directed.

M&L for Brickwork with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 including demolition of old brickwork complete all as directed

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as directed

M&L for cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) in copings including demolition of old concrete complete all as directed.

M&L for framed work in repairs such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.

M&L for preparation of new steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

Supply and fixing 100 mm dia GI steel tubes, medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and as directed.

SUN LIGHT HOUSE

SRI SAI ENTERPRISES

Anjana corporation

hari enterprises

ELEVATORS MAINTENANCE ENGINEER WORKS

MOHAMMED GHOUSE

sri vishnu enterprises