REPAIRS MAINTENANCE OF SMALL ARMS RANGE BUTT NO 1 AND 2 AND CLEANING OF SEPTIC TANKS MANHOLES AND SEWAGE LINES FOR MANUALLY OR MECHANICAL MEANS IN TECH AREA AT AFA HYDERABAD

Amount

Demolition of brick work or stone boulder masonry, built in cement mortar of any description including all quoins, arches, pillars, etc complete all as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed.

Taking down cement plaster of any description and in any position on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as directed.

Dismantling structural steel work including doors, gates, MS Flats used as in wind ties etc but excluding framed trusses etc complete all as directed.

M & L for PCC 1:4:8, type D-2 mix using 40mm graded stone aggregate as in foundations, filling and mass concrete etc complete all as specified and as directed.

M & L for cement concrete PCC 1:3:6 type C -2 mix (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 290 Gde E-165 complete all as specified and as directed.

M & L for 1.0 mm thick plain, black, mild steel sheeting in ridges, hips valley gutters, drip and straight flashing or for door coverings etc (length and girth as fixed) complete all as specified and directed.

M & L for expanded metal of weight not exc 4.0 Kg per Sqm, cut to length, bent to shape required and including welding with MS angle complete all as specified and as directed.

M&L for Cutting into existing man hole for connection new drain pipe ,making good to walls and rendering ,cutting out existing branch, channel, and making good benching in cement concrete PCC 1:2:4 type B-1 mix and smooth finish, forming benching as required for any dia of pipe complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc crome primer complete all as specified and as directed.

M & L for Mild steel TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 290 Gde E-165 complete all as specified and as directed

M&L for Precast reinforced cement concrete 1:2:4 type B-1 mix using 20 mm graded stone aggregate as in cover slabs etc (for manholes) set in cement mortar 1:6 complete all as specified and as directed

M&L for pre-cast cement concrete block masonry of PCC 1:3:6 Type C-1 mix (using 20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:4 etc complete all as specified and as directed..

M&L for pre-cast cement concrete block masonry of PCC 1:3:6 Type C-1 mix (using 20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:4 etc but except PCC blocks complete all as specified and as directed..

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed..

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying three coats of white wash complete all as specified and as directed..

M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash complete all as specified and as directed..

Excavation over areas in soft / loose materials to a depth not exceeding 1.5 mtr complete all as specified and as directed..

M & L for screening of excavated material on site of the work (Material obtained from Ser Item No19 above) (Note:- Shells retained during screening shall be deposited with C Adm O's office of AFA) complete all as specified and as directed..

Labour only for laying of screened material over the sloped portion of the shooting butt complete all as specified and as directed.

M&L for Removing excavated material (retained material from item No 20 above) to a distance exc 250 mtr and not exc 500 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply only fine aggregate (sand) as approved by Engr-in-Charge complete all as specified and as directed..

Supply only saw dust as approved by Engr-in-Charge complete all as specified and as directed.

Labour only for mixing of sand and saw dust in equal proportions and laying the same over the sloped portion of shooting butt complete all as specified and as directed.

Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundations, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sq m on plan and not exc 1.5 mtr in depth and getting out in hard / dense soil complete all as specified and as directed.

All as per Ser item No 26 above but depth exceeding 1.50 mtr but not exc.3.0 mtr in depth complete all as specified and as directed.

All as per Ser item No.26 above but depth exceeding 3.0 mtr but not exc.4.5 mtr in depth complete all as specified and as directed.

M&L for providing Cement concrete bed PCC 1:4:8 type D-2 mix using 40 mm graded stone aggregate to drain pipes including packing under and haunching completely surrounding pipes with concrete after they are laid and tested of 100 mm bore pipe complete all as specified and as directed.

All as per Ser item No. 29 above but 150 mm bore pipe complete all as specified and as directed.

All as per Ser item No. 29 above but 200 mm bore pipe complete all as specified and as directed.

All as per Ser item No. 29 above but 300 mm bore pipe complete all as specified and as directed.

M & L for 100 mm dia salt-glazed stoneware drain pipes laid in trenches and jointed including demolition and breaking up existing drain pipe set in cement mortor complete all as specified and as directed.

M & L for 150 mm dia salt-glazed stoneware drain pipes laid in trenches and jointed including demolition and breaking up existing drain pipe set in cement mortor complete all as specified and as directed.

M & L for 200 mm dia salt-glazed stoneware drain pipes laid in trenches and jointed including demolition and breaking up existing drain pipe set in cement mortor complete all as specified and as directed.

M & L for 300 mm dia salt-glazed stoneware drain pipes laid in trenches and jointed including demolition and breaking up existing drain pipe set in cement mortor complete all as specified and as directed.

M&L for providing Cement concrete PCC 1:2:4, type B-1 mix using 20 mm graded stone aggregate as in coping, benching / channels etc complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as directed.

M&L for Site clearance by cleaning shrubs / bushes / vegetation around manholes, septic tanks and filter beds etc and removing the same up to a distance not exceeding 50 mtr complete all as specified and as directed.

M&L for maintenance and cleaning of existing sewerage system. removal of blockages in sewage line (CI, SGSW or SG pipe lines) and plumbing system connection from WC,bath,urinal, kitchen etc including gully traps, floor / nahani traps, CI pipes and plumbing work etc of any description and in any position below or above ground level ,located in different situations to remove the solid or liquid wastage to make the entire system functional as directed by Engr-in-Charge. NOTE :- (i) Contractor shall deploy two sewage labours from 0900 hrs to 1700 hrs at AGE B/R II (AFA) Sub division on all working days (except Sunday and Gazetted Holidays) (ii) Sewage labour will attend day to day complaint received from user through online on the same day and in case of non deployment of sewage labour, recovery @ Rs 1000/ day per labour shall be made from the contractor dues complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of PVC / AC / CI pipes of any size and any class and in any position including all fittings etc complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm bore single socketted in any length with rubber ring joints fixed on walls / laid in trenches etc complete all as specified and as directed

S&F PVC (SWR) pipes 75 mm bore single socketted in any length with rubber ring joints fixed on walls / laid in trenches etc complete all as specified and as directed

S&F PVC (SWR) pipes 40 mm bore single socketted in any length with rubber ring joints fixed on walls / laid in trenches etc complete all as specified and as directed

S&F PVC (SWR) bends suitable for 110 mm bore pipe complete all as specified and as directed

PVC (SWR) bends suitable for 75 mm bore pipe complete all as specified and as directed

PVC (SWR) bends suitable for 40 mm bore pipe complete all as specified and as directed.

PVC (SWR) Tee suitable for 40 mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius with access door suitable for 75 mm bore pipe complete all as specified and as directed.

M & L for PVC (SWR) floor trap, 75 mm dia plain with grating including jointing with solvent cement etc complete all as specified and as directed.

M & L for PVC (SWR) gully trap 110 mm bore , setting and jointing with solvent cement complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness as in floors aprons etc laid , bedded and pointed in any mortar complete all as specified and as directed.

M&L for Non-skid coloured ceramic tiles of 7 to 8 mm thick,(Square / rectangular) area of each tile exe 0.11 sqm but not exceeding in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including screed bed or bedding layer of cement mortar 1:6 15 mm thick for laying floor finishes etc complete all as specified and as directed.

All as per Ser item No 54 above but for vertical surfaces such as dado / skirting etc including rendering 10 mm thick in CM 1:4 and rendering is to be finished rough to receive wall tiles etc complete all as specified and as directed.

S&F of Non-skid coloured ceramic tiles of 7 to 8 mm thick,(Square / rectangular) area of each tile exe 0.06 Sqm but not exceeding 0.11 Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including screed bed or bedding layer of cement mortar 1 : 6 15 mm thick for laying floor finishes etc complete all as specified and as directed.

S&F of Glazed ceramic coloured tiles of size 300 x 200 x 7 mm thick, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including rendering 10 mm thick in CM 1:4 and rendering is to be finished rough to receive wall tiles etc complete all as specified and as directed.

M/S NAVEEN BUILDERS