SPECIAL REPAIRS TO STUDENT OFFRS ACCN OF GH DSSC (BLOCK NO 10) AT DSSC WELLINGTON

Amount

M & L for Nonskid coloured ceramic tiles 7mm to 8mm thick, area of each tiles exceeding 0.11sqm but not exceeding 0.18sqm in floors etc. set, jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and as directed. (Notes : Screed bed measured and paid separately)

M & L for chequered cement concrete coloured tiles 20cm x 20cm, 25mm thick set, jointed and pointed in neat cement slurry with grey cement pigment complete all as specified and directed

M & L for coloured light shade vitrified tiles 10mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36Sqm, set, jointed in neat cement slurry and pointed in coloured cement to match as in flooring, complete all as specified and as directed.

M & L for heavy duty floor tiles of size 300 x 300mm, 10 to 13 mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment to match complete all as specified and as directed.

M & L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles of size, 450x300mm, 7mm thick on vertical surfaces such as skirting, dados and risers to steps etc. set, jointed in neat comet slurry and pointed in coloured cement to match complete all as specified and as directed.

M & L for 10 mm thick, rendering in cement mortar 1:3 as bedding for fixing tiles on vertical surfaces such as skirting, dado, etc complete all as specified and as directed.

Dismantling of floor hearth wall tiling or terrazzo flooring including cement mortar bedding removing debris off the premises complete all as specified and as directed.

M & L for granite work with 20 mm thick granite slabs (Jet Black in colour table rubbed and polished) in single or two piece length as in cooking platform, microwave platform, WHB counter top etc., set in cement mortar 1:4, 20 mm thick including pointing in white cement 1:2 using marble dust, of superior quality machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and as directed.

M & L for Machine cut cudappah stone slab 20-25 mm thick laid over cement screed bed in CM1:4, 10 mm thick, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of cudappah stone including cutting and polishing complete all as specified and as directed.

Formwork to soffits of suspended slab of fair finished flat surfaces such as roof, floor slabs, landing and similar work of thickness not exceeding 200mm complete all as specified and as directed.

M & L RCC 1:1 1/2:3, Type-A, using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roof, landing, balconies, canopies, deck slabs and shelves and the like complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M & L for 10 mm thick, rendering in cement mortar 1:6 on stone masonry or other than fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on stone masonry or other than fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M & L for . 5 mm thick rendering in cement mortar 1:3 to soffit of RCC slab and ceiling , etc finished even & fair without using extra cement complete all as specified and as directed.

Taking down door/ window chowkats or frame with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down door/window chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each all as specified and as directed.

Taking down Door/Window shutter not exc. 1.0 Sqm each complete all as specified and as directed.

Taking down Door/Window shutter exe 1.0sqm and not exc. 2.0 Sqm each complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed.

S & F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick Moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face with wood free EPS complete all as specified and as directed.

S & F 100mm size stainless steel butt hinges, fixed with stainless steel hinge pin complete all as specified and as directed.

S & F 150 mm long, PVC Bow handle complete all as specified and as directed.

S & F 100mm long, PVC tower bolt complete all as specified and as directed.

S & F second class hard wood plain, solid straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S & F framed work such as grills, gratings etc with ends of bars shouldered and riveted or forged in to spikes and similar work conforming to Fe -290 Gde E-165 all as specified and as directed.

S & F factory made 35 mm thick, 2nd class hardwood plain, framed, panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part – I), Klin seasoned and chemically pressure treated complete all as specified and as directed.

S & F 35mm thick, 2nd class hard wood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutter as specified in SSR Part-I Section 8, clause 8.24(a) complete all as specified and as directed.

S & F 100mm size Butt hinges, medium weight, cold rolled, mild steel complete all as specified and as directed.

S & F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete all as specified and as directed.

S & F 200 mm long, Aluminum anodised barrel tower bolts, of extruded section complete all as specified and as directed.

S & F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beadings complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs complete all as specified and as directed.

S & F sheet glass ordinary quality 3 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S & F sheet glass ordinary quality 3 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes complete all as specified and as directed.

S & F Figured glass, pin headed 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty complete all as specified and as directed.

S & F Figured glass, pin headed 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed.

S & F kitchen cupboard of size 10' x 3' using HDHMR Board 18mm thick both side laminated any colour, 18mm thick shutter, 8mm thick back board and 18mm thick vertical support & horizontal shelves including necessary fittings of SS hinges with soft close, Gunmetal handle, complete all as shown on line Drg, specified and as directed.

S & F kitchen cupboard of size 8' x 3' using HDHMR Board 18mm thick both side laminated any colour, 18mm thick shutter, 8mm thick back board and 18mm thick vertical support & horizontal shelves including necessary fittings of SS hinges with soft close, Gunmetal handle, complete all as shown on line Drg, specified and as directed.

S & F kitchen cupboard of size 5' x 3' using HDHMR Board 18mm thick both side laminated any colour, 18mm thick shutter, 8mm thick back board and 18mm thick vertical support & horizontal shelves including necessary fittings of SS hinges with soft close, Gunmetal handle, complete all as shown on line Drg, specified and as directed.

S & F kitchen wall box of size 3' x 2.6" using HDHMR Board 18mm thick top & bottom both side laminated any, 18mm thick shutter with 5mm thick glass, 8mm thick back board and 18mm thick vertical support &horizontal shelves including necessary fittings of SS hinges with soft close ,Gunmetal handle, complete all as specified and as directed. Make :(i) HDHMR board : ACTION TESA (or) Equivalent(ii) HARDWARE :EBCO (or) Equivalent (III) HANDLE : RICH (or) Equivalent Glass :Saint Gobin or techno commercially equivalent.

S & F in repairs using HDHMR Board 18mm thick both side laminated any colour ,18mm thick shutter,18mm thick vertical support &horizontal shelves including necessary fittings of screws, complete all as specified and as directed. Make : HDHMR board : ACTION TESA or techno commercially equivalent.

S & F in repairs soft close stainless steel hinges complete as specified and as directed. Make:-EBCO or techno commercially equivalent.

S & F in repairs gunmetal handle complete as specified and as directed. HANDLE : RICH or techno commercially equivalent.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

Dismantling existing tanks exc. 250 lit & n. exc. 500 liters capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position (Cleaning repairing, etc. shall be measured separately) complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top and screwed lid type) FDA grade material of capacity 1000 liters hoisted and fixed in position all as specified in SSR Part I including dismantling connection from existing RCC Over Head as specified and as directed.

S & F 25mm bore, Ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete as specified and as directed.

S & F 25mm bore, Gun-metal or globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

All as per item No 54 above but 20mm bore.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm girth in brick wall all as specified and as directed.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

S & F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S & F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S & F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

M & L Providing, erecting, removing and taking away using steel tubular vertical props up to 10 mtrs height, horizontal members supporting and other necessary members, nuts, bolts, clamps, etc. as in scaffolding complete all as specified. Note : 1. The measurements shall be taken for the vertical height x length of the scaffolding erected. 2. The scaffolding shall be retained till the work is complete in all respects, including curing & finishes, etc. After completion of work, the scaffolding shall be dismantled and removed out of premises.

M & L chipping the spelled and old concrete removing loosely adhering particles using wire brushes and make the structure for the application of micro concrete complete complying with standard specification including lead and lift for an average thickness of 50 mm including disposal of debris to within site low lying area as directed by Engineer-in-charge. (Note : 1. The cleaning of the bar shall be done such that no rust shall be present after removal of rust from the bar. 2. Removal of concrete which is defective shall be right round the bar, which is going behind the thickness shall be included)

Supplying and fabricating and placing in position of new TMT bars of any dia by welding or inserting by drilling holes and embedded in epoxy grout bonding agent of Hilti or equivalent for all existing reinforcement repair works in any position wherever necessary complete all as specified and as directed by Engineer-in-charge. Note: The lap provided shall be 15 cm on either side of bar which has lost its sectional area.

M & L for exposing the existing reinforcement bars fully in the repair area and remove all loose scales and corrosion deposits using Dr. Fixit Rust Remover or equivalent and applying protective zinc primer using Fosroc Nitoprime Zincrich or Dr. Fixit Zinc primer or techno commercially equivalent. on bars of dry thickness 40 micron (wet thickness 130 micron) with approx coverage of 7.40 Sqm/liter before concreting.

Supply & Fixing of slurry tight formwork which shall not deform or leak due to pressure of micro concrete shall be fabricated and erected in position. Provision shall be made for a suitable feed hopper for pouring in the micro concrete in the formwork. The form work shall be coated with Nafuplan UST liquid for steel surfaces, Nafuplan-K for wooden surfaces or Fosroc Reebol mould releasing agent or techno commercially equivalent. releasing agent prior to final fixing in position as per manufacturers instruction. Proper supporting arrangements to be made for keeping the shutter in correct line and length complete all as specified and as directed by Engineer-in Charge.

M&L for stocking sufficient quantity of micro concrete material comprising 10 mm down graded aggregate chips, pouring in a continuous operation with a grout/ concrete mixer of low speed heavy duty dram fitted with suitable paddle shall be kept ready and chips slowly mixed in the dram thoroughly in a forced action. The mixed materials shall be placed immediately in to the position formwork continuously without any time gap complete for an average thickness of 40 - 50 mm including finishing the exposed surface to an even and smooth surface completely all as specified and as directed by Engineer-in charge. The micro concrete shall be Shikacrete-114 AE or Dr. Fixit Micro Concrete or equivalent of Manufactured by Fosroc or Bouchemie.

Demolition of cement concrete (unreinforced ) of any description and in any position not otherwise specifically provided etc (below or above ground level) and removing debris from site complete all as specified and as directed.

M & L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top layer all as specified and as directed.

M & L providing river sand/M-sand cushioning below paver block, thickness average 50mm thick complete all as specified and directed

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with gray cement and pigment including necessary compaction complete all as specified and as directed

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, etc. finished even & fair without using extra cement complete as specified and as directed.

M&L for Reinforced Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete as specified and as directed.

M&L for use & waste of steel formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. to flat rough finished surfaces of concrete square or rectangle complete as specified and as directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.

Dismantling posts (or) struts (wood, RCC (or) steel any section , including taking out embedded portion and making good disturbed ground concrete brick work masonry etc.., all as specified and as directed.

Dismantling fencing wire mesh any type all as specified and as directed.

S&F mild steel works such as Joist, channel, angle or tee sections, posts, rafters, purlins, trusses, connecting plates, etc. fixed independently conforming to Fe-410-W(Gde E-250) quality-A all as specified and as directed.

Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mm dia wire all as specified and as directed.

fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and as directed.

S&F mild steel screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or square heads at one end and screwed the other ,each screwed end to be fitted with washers and one hexagonal or square nut , exceeding 5 cm and not exceeding 10 cm long all as specified and as directed.

S&F Vitreous China wash down water closet colour white, closed pattern with flat bottom and soft close seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including Cistern complete all as specified and as directed Make-Parryware cascade classic Cat No: C0217&C0711 or techno commercially equivalent.

S&F in repairs Vitreous China coloured WHB oval shaped counter top of min size 595 X 420x200 mm including ,waste coupling, PVC waste pipe etc. complete all as specified and as directed. Make-Jaquar CNS-WHT-705 or techno commercially equivalent.

S&F in repair central Hole Basin Mixer without popup waste system with 450mm long complete all as specified and as directed. Make-Jaquar CQT-23167B or techno commercially equivalent.

S&F in repair Wall mixer for mixing hot and cold water and provision for over head shower with 115mm long bend pipe on upper side for shower connection, connecting legs, wall flanges, screwed down for iron pipe and fixed complete all as specified and as directed. Make-Jaquar CON-273KNUPR or techno commercially equivalent.

S&F in repairs Bib cock (Two in one) with health faucet multi type including flexible hose complete all as specified and as directed. Make-Jaquar CQT-23041&ALD-573 or techno commercially equivalent.

S&F in repair over head shower 100m dia round shape single flow(ABS Body Chrome plated with gray face plate) with Rubilt cleaning system connected to 15 mm bore pipe complete all as specified and as directed..Make-Jaquar OHS1989 or techno commercially equivalent.

S&F in repair stainless steel soap dish of size min 100 mm dia or square or rectangular complete all as specified and as directed. Make-Jaquar ACN-1131N or techno commercially equivalent.

S&F in repairs toilet paper holder brass CP rod to insert paper roll mounted and screwed to walls complete all as specified and as directed. Make-Jaquar ACN-1151N or techno commercially equivalent.

S&F in repair towel rack SS Foldable with 60 cm long with 04 Nos lower hanger hooks complete all as specified and as directed. Make-Jaquar ACN-1181N or techno commercially equivalent.

S&F corner glass shelf made out of glass with CP guard rail and wall fixing accessories of size 300 mm radius complete all as specified and as directed. Make-Jaquar ACN-1173 or techno commercially equivalent.

S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed. Make:Jaquar CQT-23083K or techno commercially equivalent.

S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed..

S&F in repair 15mm dia bore copper alloy chromium plated kitchen sink mixer with regular swinging spout swan necked of Make-Jaquar CQT-23309B or techno commercially equivalent. all as specified and directed by Engineer-in charge.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) of size 150 x 150 mm with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed.

Supply and fix in repair 40 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm in any length with rubber ring joint complete all as specified and as directed.

Supply and fix in repairs, stainless steel plate racks of approved quality of size 0.90 m x 0.80 m , complete all as specified and as directed. Make : Prayag Cat No. P-348 or equivalent in Nirali/Parryware or techno commercially equivalent as approved by GE.

S&F in repairs, vitreous china water closet squatting pan orissa pattern, 630 x 450 mm size with integral foot rests, colour white and P-trap including connections to drain (or outgoing pipe), lime concrete bedding complete all as specified and as directed.

S&F in repair PVC valve less, syphonic action type, 10 Ltr capacity, flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed.

S&F wash basins, vitreous china of size 450 x 300 (corner type) including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed.

S&F in repairs Bib tap fancy type chromium plated 15 mm including taking down all as specified and directed.

S&F in repairs 15mm bore stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with brass nuts of length 600 mm each complete all as specified and as directed.

M&L for providing and laying water proofing treatment to sunken floor portion of WC ,Bathroom etc, by applying first layer of slurry of cement @0.488 kg/Sqm mixed with Dr fixit or Equivalent Acrylic based polymer modified cementitious (PMC) composite [email protected]/sqm and second layer of slurry of cement 0.242 kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126kg /sqm complete all as specified and as directed.

M&L for 20mm thick rendering in CM 1:4 mixed with liquid water proofing compound on floor surface complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.

Taking down eaves gutters & rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the center line over fittings & accessories).

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bends any radius 110 mm bore provided with access door all as specified and as directed.

S & F PVC (SWR) bends any radius 75mm bore provided with access door.

S & F PVC (SWR)110mm bore branch piece single(single Y) equal or Unequal

S & F PVC (SWR)75 mm bore branch piece single(single Y) equal or Unequal

S & F PVC (SWR) vent cowl 110 mm bore

S & F PVC (SWR) vent cowl 75 mm bore

Demolition of brick work, built in cement mortar complete as specified and as directed.

M&L Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid blocks exc 10cm width and setting in mortar(1:6) complete.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation, etc., and getting out in hard / dense soil all as specified.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm all as specified.

Removing excavated material exceeding 500m and up to total distance of 1.5 km and deposing where directed.

Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for manhole & Septic tank all as specified and as directed.

Demolition and breaking up 150mm &250mm dia SGSW pipes set in cement mortar and taking out of trenches complete all as specified.

M&L 200 mm bore PVC(SWR) Pipe laid and jointed completed all as specified and as directed.

M/L PCC 1:3:6 type C2 concrete bed to 200mm dia drain pipes including packing under and hunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete as specified and as directed.

Plain cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in benching to manholes etc., all as specified and as directed.

M&L Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves, cooking platform and similar articles with plain faces complete as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L Preparing old wooden surfaces of any description, exc. 10 cm width or girth and applying one coats of synthetic enamel paint complete as specified and as directed.

M&L Preparing old wooden surfaces of girth exc. 10 cm and applying oil staining & synthetic varnishing under coat & finishing coat including wood filler liquid transparent after removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth all as specified and as directed.

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide all as specified and as directed.

M/L Preparing old steel surfaces girth exc. 10 cm girth and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of new surfaces of walls and applying with white putty and making the surface to an even &smooth finish, rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distemper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved.

M&L for complete removal of existing treatment on surfaces of wall &applying with white putty and making the surface to an even &smooth finish, rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distemper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved

M&L for preparation of new surfaces of ceiling and applying with white putty and making the surface to an even &smooth finish, rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distemper over a coat of primer to be approved applicator of the manufacturer of the paint and all as specified and as approved for smooth finished surface of ceiling complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of ceiling & applying with white putty and making the surface to an even &smooth finish, rubbing with sand paper of different grade etc and applying two coats of tractor emulsion or Oil bound emulsion distemper over a coat of primer to be approved applicator of the manufacturer of the paint and all as specified and as approved for smooth finished surface of ceiling complete all as specified and as directed.

M& L for applying three coats of white wash on walls including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment on surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

S&F Fancy type decorative stainless steel drapery rod 20 mm dia including side caps and 'F 'and' L' brackets fixed to wall with screws complete as specified and as directed.

S & F in repairs, stainless steel 1 mm thick kitchen sink double bowl of Glossy finish, high grade stainless steel 304 gde with plug washer and waste coupling & waste pipe, including bedding in cement mortar to dwarf wall or mounted on Granite slab or on brackets and connecting union pipe, over all size of sink 1143x510x208 mm & bowl sizes 510x405x203 mm fixed on including taking down vitreous china sink complete all as specified and as directed. Make: Prayag model 1250D or techno commercially equivalent.

M&L Preparing newly plastered surfaces on external walls and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algal weather proof paint complete all as per manufacturer instruction as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall putty for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint complete all as per manufacturer instruction as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint for RR Masonry wall complete all as per manufacturer instruction as directed.

Taking down carefully existing Un-Serviceable Aluminium batten/ surface conduit/ concealed conduit point wiring (light/exhaust fan/socket/call bell/ Power point) complete including fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, Fluorescent tube light fitting and removing the Un-Serviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ceilings etc. complete all as specified and directed by Engr-in-Charge.

Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size up to 10 Sqmm on wooden batten/ PVC conduits complete with battens/conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and directed by Engr-in-Charge.

Disconnecting/ dismantling of old existing un serviceable DB's any way 240/415 Volts with their old/un serviceable burnt MCBs complete all as specified and directed by Engr-in-Charge.

M&L for concealed point wiring with 1.5 Sq mm, FRLS PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including Rigid non metallic medium grade PVC conduit concealed in wall for the following controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed by Engr-in-Charge. Make: Havells/Finolex/KEI or techno commercially equivalent. Note : (i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate. (iii) The cost of cutting chases is deemed to be included in the unit quoted rate

a) One light/fan/call bell point controlled by one switch

b) One 5 amps 5 Pin socket outlet on independent board

c) One light point controlled by two, two way switches

All as per Item No 155 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket.

M&L for concealed sub main wiring with two single core, multi stranded, FRLS PVC insulated, 1100 Volt grade, cable with multi stranded copper conductor of size 6 Sq mm in and drawing through PVC conduit medium grade including continuous PVC insulated copper conductor single core earth continuity conductor of size 6 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Make: Havells/Finolex/KEI or techno commercially equivalent. Note : (i) 3 Runs of 6 sqmm cable & one run of medium grade PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases and the cost of making good the disturbed surfaces is deemed to be included in the quoted rate.

M&L for concealed sub main wiring with two single core, multi stranded, FRLS PVC insulated, 1100 Volt grade, cable with multi stranded copper conductor of size 2.5 Sq mm in and drawing through PVC conduit medium grade including continuous PVC insulated copper conductor single core earth continuity conductor of size 2.5 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Make: Havells/Finolex/KEI or techno commercially equivalent. Note : (i) 3 Runs of 2.5 sqmm cable & one run of medium grade PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases and the cost of making good the disturbed surfaces is deemed to be included in the quoted rate.

S&F Modular type socket out let 2 in 1, 6/16 Amps, 2 module all as specified and as directed. Make: Verona ACVKCWW163 of Crabtree or techno commercially equivalent

S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed. Make: Verona ACVSXXW161 of Crabtree or techno commercially equivalent.

S&F Modular type switch single pole 10 Amps, one module, one way all as specified and as directed. Make: Verona ACVSXXW101 of Crabtree or techno commercially equivalent.

S&F Switch modular type switch single pole, 10 Amps, one module, Two way complete all as specified and directed by Engr-in-Charge. Make: Verona ACVSXXW102 of Crabtree or techno commercially equivalent.

S&F Modular type Socket outlet 6 Amps 5 Pin, 2 module. Make:Verona ACVKSWW065 of Crabtree or techno commercially equivalent.

S&F Modular type Bell switch single pole 10 Amps one way, one module all as specified and as directed. Make:Verona of Crabtree, Cat No:ACVSBXW101 or techno commercially equivalent.

S&F Call Bell, AC, ding dong type 230 Volt. Make: Anchor, Code-10489 or techno commercially equivalent.

Supply and Concealing modular metal flush box suitable for fixing switches/sockets of following modules all as directed.

a) 1/2 Module

b) 3 Module

c) 4 Module

d) 6 Module

S&F modular cover plate suitable for fixing switches/sockets of following modules all as directed.

a) 1/2 Module

b) 3 Module

c) 4 Module

d) 6 Module

S&F of ceiling rose surface mount PVC/Polycarbonate, isolated body with face Bakelite three terminal complete all as specified and directed

Labour only for cleaning & refixing of LED light fittings obtained from Item No 152 including flexible conduit from fittings to ceiling rose complete all as specified and directed by Engr-in-Charge.

S&F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25x3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit all as directed. Make: Cat no ENDURAPEARLSL25WLED757SASYTOPC Endura pearl of Havells or techno commercially equivalent.

S&F IP>=20, Class I Wall mounted 4 feet LED batten with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, including 20 W With min 1800 lumens ,6500 K, LED 4 feet tube light and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:ENDURALINEARNEOBS20WLED865SPCWH or techno commercially equivalent.

S&F IP>=20, Class I Wall mounted 2 feet LED batten with integrated electronic driver & polycarbonate diffuser complete with all accessories, prewired, including 10 W with min 800 lumens ,6500 K, LED 2 feet tube light and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit all as specified and directed by Engr-in-Charge. Make: Havells Cat No:ENDURALINEARNEOBS10WLED865SPCWH or techno commercially equivalent.

S&F IP>=20, Class I Decorative wall mounting fixture 18W, Warm white with aluminium die cast body with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make: Luker Cat No LWL102-2 or techno commercially equivalent.

S&F IP >= 65,IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Make :Cat no RUGBYNEONFT10WLED860SSYMTOPC of Havells or techno commercially equivalent.

S&F IP >= 20, Class I surface mounted LED square fitting of size 1X1 feet for glare free light of 15 W, 5700 K with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. Cat No: PLUTOSURFA CE1X1PLS15WLED857S of Havells or techno commercially equivalent.

M&L for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 15mm bore medium grade GI protection pipe (up to 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: If the desired earth resistance is not obtained, the earthing will be redone at no extra cost to the full satisfaction of Engr-in-Charge.

Supply, install, commissioning & testing of Exhaust fan, PVC body with automatic back shutter louvers 250 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down of old unsv fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DX White or techno commercially equivalent. Note :(i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework or wood work required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rate. (ii) Old unsv Exhaust fans should be handed over to MES stores.

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1280 RPM or more, Air Delivery not less than 860 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down of old unsv fan complete all as specified & as directed. Make : Havells, Cat No: Ventil Air -DB or techno commercially equivalent. Note :(i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework or wood work required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rate. (ii) Old unsv Exhaust fans should be handed over to MES stores.

S&F MCCB, 4 pole,40A rating (Ics=100% of Icu),415Volts,30 KA Breaking capacity with adjustable thermal and fixed magnetic setting complete all as directed by the Engr-in-Charge. Make: L&T, Cat No CM97933OOG2 or techno commercially equivalent.

S&F 4 Way,IP43,IK-09 Metal Double Door, TP&N vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as outgoings, blanking plates ,without MCCB, flushing to wall/fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: DBVTL004DD or techno commercially equivalent. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F SPN DB, 12 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: DBSPN012DD or techno commercially equivalent. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F SPN DB, 4 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge. Make: L&T, Cat No: DBSPN004DD or techno commercially equivalent. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F Miniature circuit Breakers, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. Make-L&T, Cat No-AU10S10403C or techno commercially equivalent.

S&F Miniature circuit Breakers, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and directed by Engr-in-Charge. Make-L&T, Cat No-AU10SS0323C or techno commercially equivalent.

S&F Miniature circuit Breakers, single pole, C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA. Make-L&T, Cat No-AU10S10323C or techno commercially equivalent.

S&F FRP enclosure of size 1000(L) x 1000(W) x 325 (D) approx or next higher size with locking arrangement and making flush to the wall, fixing TPN DB inside with suitable accessories and fixing the energy meters 03 Nos inside incl taking down the old enclosure complete all as specified and directed by Engr-in-Charge. Make: Sintex, Cat No GSJB-100100 or techno commercially equivalent. Note: The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rate. (ii) The cost of making cut or hole to the enclosure as per site requirements is deemed to be included in the unit quoted rates. (iii) The design drawing/BOM to be obtained from auth supplier/dealer and to be got approved from Engr-in-Charge before placing final order to the auth supplier/dealer.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A C Series with Breaking capacity 10KA all as directed. Make: L&T, Cat No : DBMPS120SD or techno commercially equivalent.

Taking down carefully electrical geysers of capacity up to 25 ltrs by unscrewing nuts and bolts from clamps, disconnecting electrical connections and PVC cold/hot water connections and keeping it in safe custody till the repairs/refix complete all as specified and directed by Engr-in-Charge

M&L Refixing the Geyser in the same original position/location incl changing of PVC pipe to Steel braided hose for inlet and outlet water connections and making the electrical connection, including suitable accessories like indicator lamp,thermostat etc testing after installation complete all as specified and directed.

Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation,2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated including multifunction safety valve and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos and stickering of MES No & Qtr No complete all as specified and directed by the Engr-in-Charge. Make: Havells Monza DX, Cat No: GHWAMGTWH025 or techno commercially equivalent. Note:(i) Old Geysers should be handed over to MES Stores. (ii) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (iii)The cost of making good the disturbed surface and matching to the existing surface is deemed to be included in the unit quoted rate

M&L for Coaxial TV cable,RG-6 with less signal losses incl necessary items complete all as specified and directed by Engr-in-Charge. Make: Havells, Cat no:WHOJTTKARG06 techno commercially equivalent.

S&F internet socket RJ-45,UTP 8 contacts ,shielded, folded metal 1 module all as directed. Make:Legrand,Cat No:5734 28 or techno commercially equivalent.

S&F TV coaxial socket,1 module all as directed. Make:Legrand,Cat No:5736 25 or techno commercially equivalent.

M&L for 20mm (external dia) Rigid non-metallic medium grade PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. all as specified and directed

M&L for taking out the existing energy meters, cleaning and fixing, connecting & testing of the same in the FRP Junction box, in arrangement as directed by Engr-in-Charge and stickering the name of the corresponding Qtr No complete all as directed by Engr-in-Charge.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for erecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in soft/loose soil.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

Supply and laying light grade GI Pipe (ISI Marked) of 50mm dia for cable protection to be fixed on wall with necessary clamps or in road crossing, complete all as directed Note:-Rate quoted shall include MS clamps of required size

M & L for cutting the existing hard standing/PCC/WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top 30 mm thick cement concrete type B-1 (1:2:4) using 20 mm grade aggregate, bottom filled with excavated earth and remain finishing to a uniform smooth surface complete all as specified and directed.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings/ equipments etc. Cable Under ground, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 3.5 Core 35 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge.

Supply, spreading and compacting of approved river bed sand in trenches for cable cushion on both top and bottom of cable, including ramming all as specified and as directed by Engr-in Charge

SREERAM

lakshmibuilders

SRI SHIVASHAKTHI CONSTRUCTION

gandhie constructions