CONTRACT FOR RENOVATION OF VIP WING AT SECOND FLOOR OF ADMINISTRATIVE BUILDING AT RCF THAL

DISMANTLING EXISTING FLOORING, SKIRTING, TILES, WALL CLADDED MARBLE ETC., INCLUDING DISPOSAL OF MATERIALS DEBRIS WITHIN RCF FACTORY PREMISES WITHIN A LEAD OF 3 KM, COMPLETE AS DIRECTED BY ENGINEER-IN-CHARGE.

REMOVING EXISTING LOOSE CEMENT/PLASTER OF ANY FINISH FROM THE WALL, COMPLETE INCLUDING PREPARING SURFACE, NECESSARY SCAFFOLDING, CLEANING ETC. COMPLETE INCLUDING DISPOSAL OF MATERIALS DEBRIS WITHIN RCF FACTORY PREMISES WITHIN A LEAD OF 3 KM., COMPLETE AS DIRECTED BY ENGINEER-IN-CHARGE.

DEMOLISHING EXISTING BRICK / STONE MASONRY WORK IN CEMENT MORTAR (ANY PROPORTION AT ANY HEIGHTS / DEPTHS INCLUDING STACKING OF SERVICEABLE MATERIALS AND DISPOSAL OF UNSERVICEABLE WITHIN A LEAD OF 3 KM., COMPLETE AS DIRECTED BY ENGINEER-IN-CHARGE

REMOVING LIME OR LEAN CEMENT CONCRETE INCLUDING STACKING THE SPOILS AS DIRECTED WITH ALL LEADS, LIFTS ETC, COMPLETE.

REMOVING EXISTING DOORS, WINDOWS WITH FRAMES AND SHUTTERS ETC. COMPLETE. (DISMANTLING, DEMOLISHING, CUTTING, BREAKING, REMOVING & CLEANING EXISTING ITEM CAREFULLY AND STACKING THE MATERIAL AT SITE OR AS INSTRUCTED INCLUDING CARTING AWAY DEBRIS FROM ADMIN. BLDG. PREMISES WITH PRIOR APPROVAL & PERMISSIONS OF RCF. THE DEMOLISHED / STACKED MATERIAL SHALL BE PROPERTY OF THE CONTRACTOR & SHALL BE RESPONSIBILITY TO TAKE IT OUTSIDE RCF PREMISES).

REMOVING EXISTING FALSE CEILING WITH FRAMING ETC. COMPLETE. (DISMANTLING, DEMOLISHING, CUTTING, BREAKING, REMOVING & CLEANING EXISTING ITEM CAREFULLY AND STACKING THE MATERIAL AT SITE OR AS INSTRUCTED INCLUDING CARTING AWAY DEBRIS FROM ADMIN. BLDG. PREMISES WITH PRIOR APPROVAL & PERMISSIONS OF RCF. THE DEMOLISHED / STACKED MATERIAL SHALL BE PROPERTY OF THE CONTRACTOR & SHALL BE RESPOSIBILITY TO TAKE IT OUTSIDE RCF PREMISES).

REMOVING EXISTING ALUMINUM/WOODEN PARTITIONS WITH FRAMING ETC. COMPLETE. (DISMANTLING, DEMOLISHING, CUTTING, BREAKING, REMOVING & CLEANING EXISTING ITEM CAREFULLY AND STACKING THE MATERIAL AT SITE OR AS INSTRUCTED INCLUDING CARTING AWAY DEBRIS FROM ADMIN. BLDG. PREMISES WITH PRIOR APPROVAL & PERMISSIONS OF RCF.)

REMOVING W.C. PANS/ WASHBASINS / URINALS INCLUDING DISCONNECTING THE SANITARY AND WATER SUPPLY CONNECTIONS, REMOVING AND BREAKING FLOORING AND BED CON-CRETE AROUND PAN REMOVING THE SAME CAREFULLY AND STACKING THE SERVICEABLE MATERIALS AS ADN WHERE DIRECTED INCLUDING THROWING THE UNSERVICEABLE MATERIASLS OUT SIDE ETC. CAREFULLY AND THROWING OUT THE REFUSAL OUTSIDE ETC. COMPLETE.

PROVIDING AND CONSTRUCTING SECOND CLASAS BURNT BRICK MASONRY IN CEMENT MORTAR 1:6 (1 CEMENT : 6 COARSE SAND) INCLUDING STRIKING JOINTS, WATREING, SCAFFOLDING ETC. COMPLETE IN SUPERSTRUCTURE AT ALL HEIGHTS.

PROVIDING LIGHT WEIGHT AUTOCLAVED CONCRETE BLOCK MASONRY OF APPROVED BLOCK SIZE USING PRE-MIXED AND READY TO USE COMPATIBLE MORTOR AS DIRECTED BY EIC.

PROVIDING AND CONSTRUCTING HALF BRICK MASONRY USING SECOND CLASS BRICKS IN CEMENT MORTAR 1:4 (1 CEMENT : 4 COARSE SAND) WITH TWO NUMBERS 6 MM DIA M.S. REINFORCEMENT AT EVERY THIRD COURSE EMBEDDED IN CEMENT MORTAR IN SUPERSTRUCTURE AT ALL HEIGHTS. (THE RATE SHALL INCLUDE THE COST OF REINFORCEMENT).

PROVIDING AND APPLYING POLYMER MODIFIED READY MIX CEMENT MORTAR (PMM) FOR PLASTERING/ MICRO CONCRETE (PMC) OF ANY THICKNESS AS PER SITE REQUIREMENT OF APPROVED BRAND INCLUDING CURING ETC. AS PER MANUFACTURER'S SPECIFICATIONS OR AS PER INSTRUCTIONS OF ENGINEER IN-CHARGE (THE ITEMS SHALL BE PAID ON ACTUAL CONSUMPTION OF READY MIX QUANTITY ONLY). THE RATE SHALL BE INCLUSIVE OF SURFACE PREPARATION BEFORE APPLICATION AS PER THE MANUFACTURER'S SPECIFICATIONS INCLUDING NECESSARY FORMWORK, APPLYING RUST CONVERTER, RUST INHIBITOR COAT, BOND COAT ETC. AS DIRECTED BY EIC AT ALL HEIGHTS INCLUDING M.S. PIPE SCAFFOLDING ETC. COMPLETE.

PROVIDING AND LAYING CAST IN SITU/READY MIX CEMENT CONCRETE IN M20 OF TRAP/ GRANITE/QUARTZITE/GNEISS METAL FOR FOUNDATION AND BEDDING / STEPS INCLUDING STEEL CENTERING, FORMWORK, LAYING/PUMPING, COMPACTING, ROUGHENING THEM IF SPECIAL FINISH IS TO BE PROVIDED, FINISHING UNEVEN AND HONEYCOMBED SURFACE AND CURING ETC. COMPLETE. THE CEMENT MORTAR 1:3 PLASTER IS CONSIDERED FOR RENDERING UNEVEN AND HONEYCOMBED SURFACE, ONLY. NEWLY LAID CONCRETE SHALL BE COVERED BY GUNNY BAG, PLASTIC, TARPAULIN ETC.

PROVIDING INTERNAL CEMENT PLASTER 12 MM THICK AT ALL HEIGHTS IN SINGLE COAT IN READY MIX CEMENT MORTAR 1:3 TO CONCRETE OR BRICK SURFACES, IN ALL POSITIONS INCLUDING SCAFFOLDING AND CURING COMPLETE.

PROVIDING INTERNAL/ EXTERNAL CEMENT PLASTER 20 MM THICK AT ALL HEIGHTS IN SINGLE COAT IN READY MIX CEMENT MORTAR 1:3 TO CONCRETE OR BRICK SURFACES, IN ALL POSITIONS INCLUDING SCAFFOLDING AND CURING COMPLETE.

PROVIDING AND APPLYING 8 TO 10 MM THICK POP WALL PUNNING AS REQUIRED TO INTERNAL WALLS INCLUDING SCRAPPING OF EXISTING PAINT OR ON NEW SURFACES WITH LINE & LEVEL TO MAKE SURFACE SMOOTH.

PROVIDING & APPLYING ASIAN PAINTS / NEROLAC / BERGER LUSTRE PAINT AS REQUIRED TO INTERNAL WALLS & CEILING AS PER MANUFACTURER'S SPECIFICATIONS WHICH INCLUDE SCRAPPING THE WALL, APPLYING 1 COAT OF PRIMER & 2/3 COATS OF PUTTI, SCRAPPING THE WALL WITH WATER PAPER AND APPLYING 2 COATS OF LUSTRE PAINT.

PROVIDING AND APPLYING PLASTIC EMULSION PAINT OF ASIAN PAINTS / NEROLAC / BERGER OR APPROVED BRAND AND MANUFACTURE TO GIVE AN EVEN SHADE WITH APPROVED QUALITY ACRYLIC WASHABLE DISTEMPER (READYMADE) OF APPROVED MANUFACTURE'S SPECIFICATION. TWO OR MORE COATS ON NEW WORK. THE JOB INCLUDES PREPARATION OF SURFACE, PROVIDING AND APPLYING MANUFACTURE'S APPROVED DISTEMPER PRIMER AND APPLYING TWO COATS OF BIRLA PUTTY TO MAKE GOOD THE UNEVENNESS OF THE SURFACES INCLUDING NECESSARY SCAFFOLDING ETC. COMPLETE FOR ALL HEIGHTS. AS PER AND AS DIRECTED & INSTRUCTED BY ENGINEER-IN-CHARGE.

PROVIDING AND APPLYING WASHABLE OIL-BOUND DISTEMPER OF APPROVED COLOUR AND SHADE TO OLD AND NEW SURFACES IN TWO COATS INCLUDING SCAFFOLDING, PREPARING THE SURFACES. (EXCLUDING THE PRIMER COAT.) ETC. COMPLETE.

PROVIDING AND APPLYING TWO COATS OF FLAT OIL PAINT OF APPROVED COLOUR TO THE OLD STRUCTURAL STEEL WORK AND IRON WORK PREVIOUSLY PAINTED IN BUILDING INCLUDING SCAFFOLDING, IF NECESSARY, CLEANING AND PREPARING THE SURFACE (EXCLUDING PRIMER COAT) ETC. COMPLETE.

PROVIDING AND APPLYING FRENCH POLISH TO WOOD WORK, FOR REQUIRED FINISHING INCLUDING. KNOTTING, PREPARING THE SURFACES, SCAFFOLDING ETC. COMPLETE AS DIRECTED.

METAL FRAMED SUSPENDED CEILING (SEAMLESS): MAIN SYSTEM: METAL FRAMED SUSPENDED CEILING COMPRISES OF G.I PERIMETER CHANNEL HAVING 0.55MM THICKNESS, TWO UNEQUAL FLANGES OF 20 AND 30MM AND WEB OF 27MM IS FIXED TO SURROUNDING WALLS / PARTITION USING NYLON SLEEVES AND SCREWS AT 450MM CENTERS. THEN INTERMEDIATE CHANNEL (0.91MM THICK) HAVING TWO EQUAL FLANGES OF 15 MM. EACH AND A WEB OF 45MM IS SUSPENDED FROM THE SOFFIT AT 1220 MM CENTER WITH CEILING ANGLE OF WIDTH 25MM X 10 MM X 0.55 MM THICK, FIXED TO SOFFIT AT 1220MM CENTRE WITH G.I CLEAT AND STEEL EXPANSION FASTENERS. CEILING SECTION OF 0.55MM THICKNESS HAVING KNURLED WEB OF 50.5 MM AND FLANGES OF 26MM EACH WITH LIPS OF 10.5MM ARE THEN FIXED TO THE INTERMEDIATE CHANNEL WITH CONNECTING CLIPS ACROSS TO THE INTERMEDIATE CHANNEL, AT 457MM CENTERS. 8MM THICK SQUARE/TAPERED EDGE HILUX BOARDS OR EQUIVALENT ARE THEN SCREW FIXED ACROSS THE CEILING SECTIONS WITH 25MM LONG SELF DRILLING & TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER, FOR FIRST AND SECOND LAYER RESPECTIVELY, AT 200MM CENTERS. JOINTING AND FINISHING: THE JOINTS OF THE FACE BOARDS ARE FINISHED WITH SPECIALLY FORMULATED JOINTING COMPOUND AND 48MM WIDE FIBRE TAPE TO PROVIDE SEAMLESS FINISH. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE:G.I. PERIMETER CHANNEL AND SUPPORTING MATERIALS ARE TO BE PROVIDED TO MAKE ANY OPENING FOR LIGHT FITTINGS, DIFFUSERS ETC. AND SHOULD BE SUPPORTED PROPERLY TO MAINTAIN THE INTEGRITY OF THE CEILING, AND SHOULD BE CHARGED EXTRA.

PROVIDING & FIXING OF GI METAL LAY IN MICRO PERFORATED OF ARMSTRONG OR EQUIVALENT MAKE (1.8MM DIAMETER-20% OPEN AREA) METAL CEILING CONSISTING OF 600X600MM LAY IN TILES IN 0.7 MM THICK GI METAL PRE COATED TO GLOBAL WHITE COLOR WITH ACOUSTICAL FLEECE HOT PRESSED ON THE BACK OF THE PERFORATED TILE & 50 MM THK. RESIN BONDED GLASS WOOL BACKING TO BE LAID ON ARMSTRONG GRID SYSTEMS WITH 24MM WIDE T - SECTION FLANGES COLOR WHITE HAVING ROTARY STITCHING ON THE MAIN RUNNER, 1200 MM & 600 MM CROSS TEES. THE TILES WOULD HAVE NRC OF 0.50, FIRE PERFORMANCE OF CLASS A2-S1.D0 AS PER EN13501 STANDARD IN MODULE SIZE OF 600 X 600MM, SUITABLE FOR GREEN BUILDING APPLICATION, WITH RECYCLED CONTENT OF 50%. THE TILE SHALL BE LAID ON 24 MM WIDE T - SECTION FLANGES COLOUR WHITE HAVING ROTARY STITCHING ON ALL T SECTIONS I.E. THE MAIN RUNNER, 1200 MM & 600 MM CROSS TEES WITH A WEB HEIGHT OF 30MM AND A LOAD CARRYING CAPACITY OF 15.34KGS/M2& PULL OUT STRENGTH OF 100KGS. THE T SECTIONS HAVE A GALVANIZING OF 90 GRAMS PER M2 AND NEED TO BE INSTALLED WITH SUSPENSION SYSTEM.

PROVIDING AND LAYING MIRROR / GLOSSY / MATT FINISH VITRIFIED TILES OF SOMANY / RAK / KAJARIA / NITCO / JHONSON OR EQUIVALENT MAKE HAVING SIZE 800 MM X 800 MM OR 600 MM X 1200 MM OR 800 MM X 1600 MM OR AS DIRECTED BY EIC (THICKNESS TO BE SPECIFIED BY MANUFACTURER) AND CONFIRMING TO IS 15622-2006 OF APPROVED MAKE, SHADE AND PATTERN FOR FLOORING/SKIRTING IN REQUIRED POSITION LAID ON A BED OF 1:4 CEMENT MORTAR INCLUDING NEAT CEMENT FLOAT, FILLING JOINTS, CURING AND CLEANING ETC. COMPLETE.

PROVIDING AND LAYING MIRROR / GLOSSY / MATT FINISH VITRIFIED TILES OF SOMANY / RAK / KAJARIA / NITCO / JHONSON (300 MM X 300 MM OR 590-600 MM X 590-600 MM OR GREATER SIZED AS DIRECTED BY EIC) OF APPROVED QUALITY, SHADE AND PATTERN FOR DADO AND SKIRTING IN REQUIRED POSITION LAID ON A BED OF CEMENT MORTAR 1:4 INCLUDING CEMENT FLOAT JOINT FILLING WITH WHITE/COLOUR CEMENT SLURRY, CLEANING, CURING INCLUDING MAKING EXISTING FLOOR SUITABLE TO FIX NEW TILES IN PROPER LEVEL ETC. COMPLETE AS INSTRUCTED BY EIC.

PROVIDING & FIXING BLACK GRANITE STONE 18 TO 20 MM THICK FOR DOOR & WINDOW SILLS/JAMBS/FRAME/RISER/TREAD ETC. IN SINGLE/DOUBLE STEM IN 1:6 INCLUDING NOSING SHARP EDGES WHEREVER NECESSARY AS DIRECTED BY EIC.

PROVIDING, SUPPLING & FIXING 12MM THICK DOUBLE LEAF TOUGHNED GLASS DOOR (6' X 7'-6" OR AS DIRECTED) OF SAINT GOBAIN/MODI/ASAI MAKE WITH 6/8" AS DIRECTED POLISHED WOODEN PATTI AT TOP & BOTTOM. THE GLASS DOOR SHALL BE MADE OPERATABLE ON FLOOR SPING OF ENOX/OMEGA MAKE & CAPABLE TO TAKING ITS LOAD WITH OTHER PATCH FITTINGS SUCH AS LOCK, BOTTOM & TOP PATCH, PIVOT, 2 PAIRS OF 2' HIGH SS FINISH HANDLE, PUSH/PULL INDICATOR, ETC. THE DOOR MAY ALSO HAVE SS FINISH BRASS MAKE STOPPER FIXED ON TOP IF REQUIRED.

PROVIDING, SUPPLING & FIXING 12MM THICK SINGLE LEAF TOUGHNED GLASS DOOR OF SAINT GOBAIN/MODI/ASAI MAKE WITH 6/8" AS DIRECTED POLISHED WOODEN PATTI AT TOP & BOTTOM. THE GLASS DOOR SHALL BE MADE OPERATABLE ON FLOOR SPING OF ENOX/OMEGA MAKE & CAPABLE TO TAKING ITS LOAD WITH OTHER PATCH FITTINGS SUCH AS LOCK, BOTTON & TOP PATCH, PIVOT, 2' HIGH SS FINISH HANDLEON BOTH SIDES, PUSH/PULL INDICATOR, ETC. THE DOOR MAY ALSO HAVE SS FINISH BRASS MAKE STOPPER FIXED ON TOP IF REQUIRED.

PROVIDING & FIXING 30 MM THICK SINGLE LEAF SOLID CORE FLUSH DOOR WITH APPROVED SHADE LAMINATE (1 MM) FINISH INCLUDING NECESSARY HARDWARE, FITTINGS & FIXTURES LIKE CYLINDRICAL DOOR LOCK, CHROMIUM PLATED HANDLES ON BOTH SIDES, PVC DOOR STOPPER, BRASS MAKE ISI MARKED HYDRAULIC DOOR CLOSER, POLISH TO ALL EXPOSED SURFACES, EDGES, ETC. COMPLETE AS PER DETAIL DRAWING. IF REQUIRED, THE DOOR SHALL HAVE 2' X 3' (OR AS DIRECTED) 5 MM THK. PLAIN GLASS AT TOP FIXED WITH BEADING PATTI ALL AS SPECIFIED AND AS DIRECTED.

SUPPLYING AND FIXING IN POSITION ANODIZED ALUMINUM SECTION TWO TRACK SLIDING WINDOWS WITHOUT BOX FRAME MADE UP OF TWO TRACK DRAIN BOTTOM SECTION OF SIZE 61.85 X 31.75 X 1.2 MM THICK (WT. 0.695 KG/M) AND TOP AND SIDES SECTIONS OF SIZE 61.85 X 31.75 X 1.2 MM THICK (WT. 0.417 KG/M). THE SHUTTER SHOULD BE OF BEARING BOTTOM OF SIZE 40 X 18 X 1.25 MM THICK (WT. 0.417 KG/M), TOP MEMBER OF SIZE 40 X 18 X 1.25 MM (WT. 0.417 KG/M) THICK, INTER LOCKING SECTION SIZE OF 40 X 18 X 1.25 MM THICK (WT. 0.469 KG/M) AND HANDLE SECTION SIZE OF 52 X 18 X 1.13 MM THICK (WT. 0.488 KG/M) ALUMINUM SECTIONS FIXTURES AND FASTENINGS SUCH AS ROLLER BEARINGS IN NYLON CASTING AND SELF-LOCKING CATCH FITTED IN VERTICAL SECTION OF SHUTTER INCLUDING 5 MM THICK PLAIN GLASS WITH ALL REQUIRED SCREWS AND NUTS AND WOODEN ENCASEMENT WHEREVER NECESSARY ETC. COMPLETE AS DIRECTED BY EIC.

PROVIDING & FIXING IN POSITION ANODIZED ALUMINUM LOUVERED WINDOWS/VENTILATORS HAVING FRAME MADE OUT OF SIZE 80 X 38 MM X 1.22 MM THICKNESS BOX TYPE WITH SHEET GLASS LOUVERS 5 MM THICK AND WOODEN ENCASEMENT WHEREVER NECESSARY ETC. AS DIRECTED BY EIC.

PROVIDING AND FIXING ISI MARKED HYDRAULIC DOOR CLOSER (80 TO 90 KG CAPACITY) FOR ALUMINIUM DOORS/WOODEN DOORS AS DIRECTED BY EIC.

SUPPLYING AND PASTING GARWARE OR EQUIVALENT POLYESTER FILM, OF APPROVED COLOUR & REFLECTIVE RANGE OVER GLASS PANES AT ALL ELEVATION INCLUDING PREPARATION OF GLASS, SPRAYING OF CHEMICAL OVER GLASS, PRESSING OF FILM BY WIPER WITHOUT ANY BUBBLES DONE BY A PROFESSIONAL AGENCY COMPLETE TO THE SATISFACTION OF ENGINEER-IN-CHARGE.

FULL HEIGHT PARTITION: PROVIDING & FIXING A NON-LOAD BEARING, 74MM THICK METAL FRAMED PARTITION WITH 1HOUR FIRE RATING AND SOUND INSULATION OF 41 DECIBEL. MAIN SYSTEM: 74MM THICK METAL STUD PARTITION COMPRISING OF A 100MM WIDE X 12MM THICK HILUX BOARD OR EQUIVALENT FILLETS (STRIPS) SCREW FIXED WITH 25MM SELF TAPPING SCREWS AT 200MM CENTRES TO BOTH SIDES OF A COMPOSITE FRAMEWORK WHICH INCLUDES A 48MM STUD OF 0.55MM THICK AND HAVING TWO UNEQUAL FLANGES OF 48AND 50MM EACH PLACED AT 610MM CENTER TO CENTER IN 50MM FLOOR AND CEILING CHANNEL WITH TWO EQUAL FLANGES OF 32MM EACH FIXED TO FLOOR AND CEILING AT 600MM CENTER, WITH THE HELP OF NYLON SLEEVES AND WOOD SCREWS. 12MM THICK HILUX BOARDS OR EQUIVALENT ARE THEN SCREW FIXED BY 35MM LONG SELF DRILLING AND TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER, TO THE STUDS AND CHANNELS ON BOTH SIDES OF THE FRAME WORK. THE BOARD’S JOINTS ARE TO BE STAGGERED TO AVOID THROUGH PASSAGE. INSULATION: 50MM THICK (DENSITY-48KG/M3) MINERAL WOOL OR ROCKWOOL AS DIRECTED IS TO BE PLACED IN THE CAVITY OF THE PARTITION. JOINTING AND FINISHING: FINALLY EDGES OF THE FACING BOARDS ARE TO BE JOINTED AND FINISHED SO AS TO HAVE A SEAMLESS FINISH WHICH INCLUDES FILLING AND FINISHING WITH SPECIALLY FORMULATED JOINTING COMPOUND AND SELF-ADHESIVE FIBRE TAPE. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE: A HORIZONTAL BRACING CHANNEL IS TO BE PROVIDED IF THE PARTITION HEIGHT EXCEEDS THE BOARD LENGTH TO PROVIDE EDGE SUPPORT TO THE BOARD. THE NECESSARY OPENING SHALL BE PROVIDED IN THE PARTITION FOR ELECTRICAL/TELEPHONE CONDUITS & OUTLETS AS PER DESIGN/INSTRUCTIONS.

FULL HEIGHT PARTITION PARTLY GLAZED : SAME AS FULL HEIGHT PARTITION ITEM WITH PARTITION WITH PARTLY GLAZED 8MM THICK CLEAR GLASS WITH BTC BEADING PATTIES FINISHED WITH POLISH/PAINT AS PER MATCHING SHADE LAMINATE AS PER DESIGN/INSTRUCTIONS. RATE IS INCLUDING EXTRA FRAMEWORK FOR FIXING OF GLASS AND NO DEDUCTION FOR GLASS AREA SHALL BE MADE FOR PARTITION AREA MEASUREMENT .

LOW HEIGHT PARTITION FOR CUBICALS : SAME AS FULL HEIGHT PARTITION ITEM WITH PARTITION PROVIDED WITH 3-1/2" WIDE X1" THK MOULDING PATTI IN B.T.C ON EDGES AND THE SAME SHALL BE FINISHED WITH MATCHING POLISH WITH 10MM THK EDGE POLISHED CLEAR GLASS FIXED OVER WITHIN BEADING PATTI 1" DEEP AS DIRECTED. (RATE IS EXCLUDING GLASS)

PROVIDING AND FIXING 1.5 MM THICK LAMINATES (OF MAKE GREENLAM, CENTURY, MERINO OR EQUIVALENT) TO FULL HEIGHT/LOW HEIGHT PARTITIONS AND ANY OTHER LOCATIONS WITH FINISH AS DIRECTED BY EIC.

FULL HEIGHT CLADDING: PROVIDING & FIXING A NON-LOAD BEARING, 37MM THICK METAL FRAMED CLADDING ON WALL COMPRISING OF 12MM THICK HILUX BOARD OR EQUIVALENT FILLETS (STRIPS) SCREW FIXED WITH 25MM SELF TAPPING SCREWS AT 200MM CENTRES OF A FRAMEWORK WHICH INCLUDES CHANNEL WITH TWO EQUAL FLANGES OF 32MM EACH FIXED VERTICALLY ON WALL AT 600MM CENTER, WITH THE HELP OF NYLON SLEEVES AND WOOD SCREWS. 12MM THICK HILUX BOARDS OR EQUIVALENT ARE THEN SCREW FIXED BY 35MM LONG SELF DRILLING AND TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER, TO THE STUDS AND CHANNELS ON SINGLE SIDE OF THE FRAME WORK. THE BOARD’S JOINTS ARE TO BE STAGGERED TO AVOID THROUGH PASSAGE. JOINTING AND FINISHING: FINALLY EDGES OF THE FACING BOARDS ARE TO BE JOINTED AND FINISHED SO AS TO HAVE A SEAMLESS FINISH WHICH INCLUDES FILLING AND FINISHING WITH SPECIALLY FORMULATED JOINTING COMPOUND AND SELF-ADHESIVE FIBRE TAPE. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE: THE NECESSARY OPENING SHALL BE PROVIDED IN THE PARTITION FOR ELECTRICAL/TELEPHONE CONDUITS & OUTLETS AS PER DESIGN/INSTRUCTIONS.

FULL HEIGHT CLADDING: PROVIDING & FIXING A NON-LOAD BEARING, 12MM THICK HILUX BOARD OR EQUIVALENT CLADDING DIRECTLY ON PLASTERED WALL SCREW FIXED WITH 25/35MM SELF DRILLING AND TAPPING SCREWS HAVING PHILLIPS HEAD WITH UNDER HEAD CUTTER. THE BOARD’S JOINTS ARE TO BE STAGGERED TO AVOID THROUGH PASSAGE. JOINTING AND FINISHING: FINALLY EDGES OF THE FACING BOARDS ARE TO BE JOINTED AND FINISHED SO AS TO HAVE A SEAMLESS FINISH WHICH INCLUDES FILLING AND FINISHING WITH SPECIALLY FORMULATED JOINTING COMPOUND AND SELF-ADHESIVE FIBRE TAPE. CEMENT PRIMER (OIL BASED) TO BE PROVIDED ON ENTIRE SURFACE BEFORE PUTTY/ PAINTING. NOTE: THE NECESSARY OPENING SHALL BE PROVIDED IN THE WALL FOR ELECTRICAL/TELEPHONE CONDUITS & OUTLETS AS PER DESIGN/INSTRUCTIONS.

PROVIDING & FIXING 50 MM THICK SINGLE / DOUBLE LEAF SOLID CORE FLUSH DOOR OF EXTERIOR GRADE AS PER DETAILED DRAWINGS APPROVED FACE VENEERS 4 MM THICK ON BOTH FACES OR AS DIRECTED, ALL NECESSARY BEADS, MOULDINGS AND LIPPING, WROUGHT IRON HOLD FASTS CHROMIUM PLATED FIXTURES AND FASTENINGS, WITH BRASS MORTISE LOCK, PVC DOOR STOPPER, CHROMIUM PLATED HANDLES ON BOTH SIDES, AND FINISHING WITH FRENCH POLISH TO ALL EXPOSED SURFACES, EDGES, ETC ETC., ALL AS SPECIFIED AND AS DIRECTED.

PROVIDING AND FIXING 4 MM THICK DECORATIVE VENEER (OF MAKE GREEN, CENTURY, DURO OR EQUIVALENT) WITH MELAMINE POLISH AT LOCATIONS AS DIRECTED BY EIC

PROVIDING AND FIXING SINGLE LEAF FRP DOOR SHUTTER 30 MM THICK OF APPROVED SHADE AND PATTERN INCLUDING NECESSARY HARDWARE, LOCK, DOOR STOPPER, HANDLES AND OTHER FITTINGS ETC. AS DIRECTED BY EIC.

PROVIDING AND FIXING BRASS PILLAR, STOP TAP OR REGULAR TAP WITH NECESSARY FITTINGS OF SEIKO/PLUMBER OR OF EQUIVALENT MAKE AS APPROVED BY EIC.

PROVIDING & FIXING CONCEALED / CLAMPED ON WALL ASTRAL/FINOLEX OR EQUIVALENT MAKE CPVC PIPE IN TOILETS WITH NECESSARY FITTINGS LIKE ELBOW, UNIONS, PLUG, PVC INSULATION PIPE & OTHER HARDWARE AND MAKING ALL PIPES LEAK PROOF INCLUDING PLUMBING LINES FOR BELOW MENTION SANITARY FITTINGS FOR 15 MM DIA.

PROVIDING & FIXING CONCEALED / CLAMPED ON WALL ASTRAL/FINOLEX OR EQUIVALENT MAKE CPVC PIPE IN TOILETS WITH NECESSARY FITTINGS LIKE ELBOW, UNIONS, PLUG, PVC INSULATION PIPE & OTHER HARDWARE AND MAKING ALL PIPES LEAK PROOF INCLUDING PLUMBING LINES FOR BELOW MENTION SANITARY FITTINGS FOR 20 MM DIA.

PROVIDING & FIXING CONCEALED / CLAMPED ON WALL ASTRAL/FINOLEX OR EQUIVALENT MAKE CPVC PIPE IN TOILETS WITH NECESSARY FITTINGS LIKE ELBOW, UNIONS, PLUG, PVC INSULATION PIPE & OTHER HARDWARE AND MAKING ALL PIPES LEAK PROOF INCLUDING PLUMBING LINES FOR BELOW MENTION SANITARY FITTINGS FOR 25 MM DIA.

PROVIDING AND FIXING 100 MM RIGID PVC NAHANI TRAP INCLUDING PVC GRATING, BEND, CONNECTING PIECE OF UPVC PIPE UP TO OUTSIDE FACE OF WALL AND OTHER NECESSARY FITTINGS ETC. COMPLETE AS DIRECTED BY EIC.

PROVIDING & FIXING COUNTER TOP WASH BASIN OF PARRYWARE/HINDWARE/ JAQUAR MAKE & OF APPROVED COLOR WITH ITS FITTINGS INCLUDING BRASS WASTE COUPLING, SS BOTTLE TRAP, CP PILLAR TAP (JAQUAR/PLUMBER MAKE), CONNECTOR FOR ANGEL COCK, CP HEAVY QUALITY ANGLE STOP COCK, ETC. COMPLETE SO AS TO MAKE IT FIT TO USE.

PROVIDING AND FIXING WALL HUNG / FLOOR MOUNTED EUROPEAN TYPE WHITE GLAZED EARTHENWARE WATER CLOSET PAN OF PARRYWARE/HINDWARE WITH ITS FITTINGS, 4" DIA. PVC BEND PIPE, M.S.BRACKETS, SOFT CLOSER SEAT, GROHE MAKE PNEUMATIC FLUSH TANK, 2 WAY BIB COCK WITH HEALTH FAUSCET, ETC. WITH CHROMIUM PLATED BRASS HINGES AND RUBBER BUFFERS INCLUDING UPVC AND VENT PIPE UP TO THE OUTSIDE FACE OF WALL WITH FITTINGS PIPE, BRACKETS FOR FIXING CISTERN 32 MM DIA. UPVC FLUSH PIPE WITH FITTINGS AND CLAMPS, 20 MM DIA. UPVC OVERFLOW PIPE, MOSQUITO PROOF COUPLINGS, WITH WATER JET AND FITTING INCLUDING CUTTING AND MAKING GROOVE TO THE WALLS AND FLOORS TESTING ETC. COMPLETE SO AS TO MAKE IT FIT TO USE.

PROVIDING & FIXING OF PROCELAIN CHINA WARE URINAL 635 X 395X 420 INCLUDING BRACKET AND ALL REQUIRED MATERIAL ETC. PVC OUTLET FOR URINAL OF SIZE 32MM DIA. CP DOOM TYPE WASTE COUPLING FOR URINAL ETC. COMPLETE. URINAL BRACKET, CP AUTO CLOSING ANGLE COCK, CP SPREADER CONNECTION FOR URINAL ETC. CP CONNECTOR FOR URINAL ETC. COMPLETE.

PROVIDING AND FIXING STAINLESS STEEL (GRADE 304) RAILING MADE OF HOLLOW TUBES, CHANNELS, PLATES ETC. INCLUDING WELDING GRINDING, BUFFING, POLISHING AND MAKING CURVATURE (WHEREVER REQUIRED) AND FITTING THE SAME WITH NECESSARY STAINLESS STEEL NUTS AND BOLTS COMPLETE, I/C FIXING THE RAILING WITH NECESSARY ACCESSORIES AND STAINLESS STEEL DASH FASTENERS, STAINLESS STEEL BOLTS, ETC. OF THE REQUIRED SIZE ON THE TOP OF THE FLOOR OF THE SIDE OF WAISTE SLAB WITH SUITABLE ARRANGEMENT AS PER APPROVAL COMPLETE AS DIRECTED BY EIC. (SAMPLE DESIGN SHALL BE APPROVED)

PROVIDING AND APPLYING TEXTURE PAINTING (TEXTURED EXTERIOR PAINT/ACRYLIC SMOOTH EXTERIOR PAINT/PREMIUM ACRYLIC SMOOTH EXTERIOR PAINT/100% PREMIUM ACRYLIC EMULSION PAINT) OF APPROVED BRAND ASIAN / BERGER/ DULUX OR EQUIVALENT MANUFACTURE. MAKING THE SURFACE CLEANED AND FREE FROM IMPERFECTION AND APPLYING THE TEXTURE MIXTURE AS APPROVED BY EIC, BY MEANS OF A TROWEL OR A SPATULA TO OBTAIN A COATING OF AROUND 0.5 TO 1 MM THICKNESS AND SHALL ALLOW TO SET AND DRY FOR 4 TO 6 HOURS. AFTER SETTING OF THE FIRST COAT, FOR PATTERN TEXTURE MATERIAL SHALL BE APPLIED WITH THE SECOND COAT TO CREATE THE DESIRED PATTERN AS APPROVED BY EIC BY MOVING THE TROWEL IN THE DESIRED FASHION, PROVIDING REQUIRED MASKING TAPE ALLOWED TO SET FOR OVER A NIGHT ETC. COMPLETE AS DIRECTED BY EIC

PROVIDING AND FIXING MISC. MATERIALS NOT COVERED IN THE SCHEDULE OF RATES INCLUDING TRANSPORTING, LOADING, UNLOADING AT SITE ETC. (CASH RECEIPT TO BE SUBMITTED). NOTE: 20% EXTRA SHALL BE PAID OVER BASIC RATE OF CASH MEMO.

PREPARATION OF PLAN/LAYOUT OF VIP, SBI WING AT SECOND FLOOR OF ADMINISTRATION BUILDING FOR CIVIL INTERIOR WORKS INCLUDING CABIN SIZES, PARTITIONS, IN CONSULTATION WITH RCF ENGINEERI-IN-CHARGE WITH MAXIMUM THREE REVISIONS (DUE TO INCORPORATION OF RCF INPUTS/COMMNETS AFTER SUBMISSION OF PRELIMINARY DRAWINGS).

Please Enable Macros to View BoQ information