"Design, Supply, Installation and commissioning of M&Ps at Bhilai" under Raipur division/SECR

6.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of 1.5 V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderer shall submit details of contractual payments received as per Annexure VI, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheets. 6.3 Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed as Annexure-XI. 6.4 Tenderer Credentials: Documents testifying tenderer previous experience and financial status should be produced along with his / their tender: i.Certificates and testimonials regarding contracting experience for the similar type of job for which tender is invited with list of works carried out in the past as per format attached at Annexure V. ii.Certificates which may be an attested Certificate from the client, Audited Balance Sheet duly certified by the Chartered Accountant etc. regarding contractual payments received in the past as per format attached at Annexure VI. iii.A copy of certificate stating that they are not liable to be disqualified and all their statements/documents submitted along with bid are true and factual. Standard format of the certificate to be submitted by the bidder is enclosed as Annexure-XII. Non submission of a copy of certificate by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify state and submit the supporting documents duly self-attested by which they/he are/is qualifying the Qualifying Criteria mentioned in the Tender Document. iv.The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the Railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway there under. v.(a) In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit/ Bid security besides banning of business for a period of up to two years. (b) In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD)/Bid security, Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of up to two years.

6.1Technical Eligibility Criteria: a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, Mechanical Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note (i) for b (1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note for Item 6.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs.500 crores and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Similar nature of work is defined in para 7 below. 7'Similar nature of work' in Technical Eligibility Criteria as detailed is defined as works involving: "Any work involving supply/procurement, installation and commissioning of CNC/PLC Machineries & Plants with industry-4.0/Remote Diagnostics features in railway Workshop/Sheds/Depots". Note for para 6 & 7: 1.Documents in support of the Eligibility Criteria for M&Ps, as indicated herein, and also in support of the credentials of the bidder for the Technical Eligibility Criterion, and Financial Eligibility Criterion must be submitted in the proforma enclosed at Annexure V and VI failing which tender is liable to be rejected, without any correspondence. The term 'Railway Workshops' here includes Production units an

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.