Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-Finance HIMACHAL PRADESH HP | L1 | Accepted-Finance Lowest Bidder | |
| 2 | L2₹4.8 L+₹30,546.80 (6.86%)Rejected-Finance R O VILL KHANAR P O MUNDU TEH THEOG DISTT SHIMLA 171226 | SHIMLA | HIMACHAL PRADESH | 171226 | L2 | Rejected-Finance L2 | |
| 3 | L3₹4.8 L+₹39,834.35 (8.95%)Rejected-Finance | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | NARENDER SINGH L2 | MR. BALVIR SINGH L3 | AJAY KUMAR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge. | 429.17 | Cum. | 475 ₹2,03,855.75 | 490 ₹2,10,293.3 | 435 ₹1,86,688.95 Lowest |
| 2.00Dismentalling of G.I pipes (light class) in trenches of following diameters including smooth bending by necessary bends or through pipe bending mchine complete as per the direction of the Engineer - in - Charge. | ||||||
| 2.01 | 65 mm dia. | 495 | Rmt. | 88 ₹43,560 | 90 ₹44,550 | 85 ₹42,075 Lowest |
| 2.02 | 80 mm dia. | 495 | Rmt. | 92 ₹45,540 | 95 ₹47,025 | 90 ₹44,550 Lowest |
| 3.00Cutting of threaded pipe dia 65mm (L) from both sides of socket to plain ended pipe for butt welding complete as per the entire satisfection of Engineer in Charge. | ||||||
| 3.01 | 65 mm dia. | 495 | Rmt. | 44 ₹21,780 | 45 ₹22,275 | 40 ₹19,800 Lowest |
| 3.02 | 80 mm dia. | 495 | Rmt. | 43 ₹21,285 Lowest | 45 ₹22,275 | 45 ₹22,275 |
| 4.00Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately). | ||||||
| 4.01 | 65 mm dia. | 108 | Joint. | 390 ₹42,120 | 380 ₹41,040 | 330 ₹35,640 Lowest |
| 4.02 | 80 mm dia. | 108 | Joint. | 400 ₹43,200 | 400 ₹43,200 | 380 ₹41,040 Lowest |
Tender Value
₹4.9 L
EMD Value
₹10,300
Closing Date
30 Jun 2025, 11:00 amClosed
Executive Engineer
JSV Division Jubbal
Shifting laying and butt welding of GI pipes of 80mm dia and 65 mm dia from RD 495 to 990
2025_HPIPH_107754_14
JBL-SML-09-718
Open Tender
Civil Works
Item Rate
90 days
Khorni Nallah
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
₹10,300
4 Sept 2025
18 Jun 2025
30 Jun 2025
18 Jun 2025
30 Jun 2025
18 Jun 2025
Amount
Excavation in foundations , trenches etc., in earth work , lift up to 1.50 metres. Stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm. (fifteen centimetres) layers , when required in to plinth and sides of foundations etc., conslolidating each of the disposited layer by ramming and watering and then disposing off all excavated soil as directed with in the load of 20 mtrs. Pick and Jumper work etc. complete as per the direction of the Engineer - in - Charge.
Dismentalling of G.I pipes (light class) in trenches of following diameters including smooth bending by necessary bends or through pipe bending mchine complete as per the direction of the Engineer - in - Charge.
65 mm dia.
80 mm dia.
Cutting of threaded pipe dia 65mm (L) from both sides of socket to plain ended pipe for butt welding complete as per the entire satisfection of Engineer in Charge.
65 mm dia.
80 mm dia.
Laying, butt welding and testing of ISI marked steel tubes plain ended in trenches of following dia as per IS 1239-2001, including jointing the pipes with butt welding at both the ends according to relevant BIS standards/approved specifications including manufacturing reducers/tapers, all short pices and bends as per site requirement and made from parent tubes ( to be measurer and paid alongwith pipes. Bends shall be manufactured in such a way that not more than 111/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in-charge. The damaged portion of galvanization due welding shall be provided with anticorrosive treatment by providing two coats of bituminous paint over priming coat as per AWWA specification C-203-1978. (Earth work to be measure & paid for separately).
65 mm dia.
80 mm dia.
Providing and fixing of brass full way wheel valves (Heavy Duty) inclusive necessary all pipe fittings with in all leads and lifts as per direction of Engineer-in-Charge.
25 mm dia.
32 mm dia.
50 mm dia.
Providing and supplying of Cast iron Sluice valve of following sizes Karta/ BIR/ Kirloskar make ISI marked and capable of with standing the normal pressure as per IS: 14846-2000 class PN-1 brass stel spindle complete with accessories in all repest with Table-17 MS flanges and to the entire satisfaction of Engineer-in-charge with in all lead and lifts.
65 mm dia.
80 mm dia.
NARENDER SINGH (BID ID -529453)
MR. BALVIR SINGH (BID ID -529457)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .