Kam(M)/AD19-20/02 Improvement of Road leading to Gandhi Mandap,Ulubari under Assam Darsan for the year 2019-20

Amount

Scarifying existing granular surface to a depth of 50mm and disposal of scarified material with a lift upto 3m and leads upto 1000m as per Technical specification clause 301.4

Water Bound Macadam (Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fillup the interstices of coarse aggregate,watering and compacting to the reqd. density ( with an initial lead of 5.0 km. ) A. By Manual Means iii) 'Grading- III (b)Using Screening Type-B (11.2mm Agg.)

Providing and laying Interlocking Concrete Block Pavement (ICBP) conforming to IS:15658-2006 including all lead and lift complete as per technical specification and as directed. (a) 80mm thick interlocking precast blocks having compressive strength of 40N/sq.mm

Providing and laying M-40 grade cement concrete edge block/edge restraint complete as per Technical specification clause 1504

Providing and fixing in position Double Kerb stone manufactured by GEMS and other as per BIS specification of size (300mm x 450mm x 100mm) in proper level and grade at footpath edges Divider block etc as directed and approved by the Dept.

Applying one self-opriming coat of Unicem "Shakti" brand of required shade over freshly plastered wall surface after throughly brooming the surface free from mortar droppings and other foreign matter and including preparing the aurface even and sand papered smooth as specified and directed by the department

Finishing old/new wall with water proofing weather coat smooth anti-fungal exterior painrting of Apex brand of Asian Paints and of required shade after cleaning and clearing the surface etc. Including scaffolding complete as directed at all levels (two coats)

Providing fitting and fixing in position Anti skid paver tiles and skater tiles (for differently abled persons as per BIS specification of size (300mm x 300mm x 25mm) as directed and approved by the Dept.

Providing fitting and fixing in position of ornamental iron grill of size 2000mm x 1120mm at median/foothpath edges as directed by engineer in charge

Painting on steel surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade (i) Surface over 100mm in width or grith

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road syrface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachablebattery, m6LEDsthree on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud-

Providing and fixing of semi Retro-Reflective cautionary, mandatory & informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white colour on back with red reflective border of 65mm width and required letters and figure with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47mm x 12 SWG sheet tube firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 x 450 x 600mm below ground level as per approved drawing clause 1701.2.2, (ii) 90cm equilateral Triangle

iii) 60cm Circular

iv) 60cm x 45 cm rectangular

Providing and erecting direction and place identification retro-Reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mmx 75mm x 6mm, 2nos, firmly fixed to the ground by means of properly design foundation with M15 grade cement concrete 45cm x 45cm x60cm, 60cm below ground level as per approved drawing and design (All the steel work must be TATA/SAIL)

RCC Drain-Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) II.By Mechanical Means for items No. 202, Cement concrete grade M15 & M20, SLab

Drain Bed

Excavation for Structures : 'Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. I. Ordinary soil B Mechanical Means (I)Without dewatering (i) Depth upto 3 m

Removal of unserviceable soil including excavation, loading and Disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305

Providing and laying of dry rubble flooring complete as per drawing and technical specification clause 1303.3

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.)

Supplying fitting and placing HYSD reinforcement in substructure complete as per drawing and Technical Specification

Plain/reinforced cement concrete in Sub-Structure complete as per drawings and technical specifications and steel shuttering formwork Using concrete mixer

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification

Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification B. Sandy material

Providing iron cover with iron Channel (ISMB, ISMC) as Manhole cover RCC Drain

Repairing of Cattle Trap on culvert at Ch 0.00m

Utility Shifting

Night Charge on Works

1st Year Routine Maintenance

2nd Year Routine Maintenance

3rd Year Routine Maintenance

Rana Construction and Engineers Pvt. Ltd.

Pranjal Kumar Hazarika

SWARAJ INFRA