Tender ID

Karnataka

Cancelled

Works

Buildings

CONSTRUCTION OF ONE ROOM HIGH SCHOOL BUILDING IN HEGGUR VILLAGE, BILAGI TALUK

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹16.9 LCloses: 5 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 Oct 2025
Cancelled29 Oct 2025

Cancellation Details

Cancelled

CancelledCancelledReason: Cancelled

Published 29 Oct 2025

Tender Value

₹16.9 L

EMD Value

₹17,902

Closing Date

5 Nov 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

EE PRED BAGALKOTE

Office Number

Mobile Number

Work Description

CONSTRUCTION OF ONE ROOM HIGH SCHOOL BUILDING IN HEGGUR VILLAGE, BILAGI TALUK

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT19731

Reference Number

RDPR/2025-26/BD/WORK_INDENT19731

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Bagalakote

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredPRED/KPWD CLASS-III AND ABOVE Registration Certificate

RequiredReserved FOR SC CATEGORY CONTRACTOR Cast certificate should apply

RequiredTo qualify for award of this contact each tenderer in his name should have in the 2020-21 to 2024-25 years period achieved in at least two financial years an average financial turnover of Rs.14.32 Lakhs usually not less than amount put to tender from C.A. on Letter Head with UDIN No. otherwise bid will be directly disqualified

RequiredThe Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2020-21 to 2024-25 25PERECENT of the Amount Put to Tender i.e Rs 3.58 lakhs in the prescribed format from the Competent Authority not below the rank of Executive Engineer District Level Officer and scan the Original Certificate and attach the scanned file to the Bid.

RequiredName and Address of Contractor for Communication

RequiredTenderer must Submit PAN & GST Certificate.

RequiredAssessed available tender capacity equal to AxNx5 - B

RequiredContractor should submit upload the difference amount as per the CSR 2024 25 in FDR

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Department Registration Details

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing work

List of works for which tenders already submitted

Banker Details

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

For Details Refer Tender Notification And Conditions In The Bid Documents.

All materials should be in good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Executive Engineer PRED Bagalkote has authority to accept or reject any tender without assigning reason

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

Tenderers must have valid PRED/PWD registration and must submit PRED/PWD registration copy

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc. decision of Executive Engineer, PRED, BAGALKOTE is final.

Successful bidder submitting bids below the amount put to tender will be regularized to submit the difference amount in the form of FDR/TDR/DD/Pledge on the name of EE PRED Bagalkote within 20 days from the date of receiving the letter of acceptance. additional security paid for unbalanced tenders Failing which EMD will be forfeited and further action will be taken as per G O No FD PCL 2008 Bangalore Dated 14/10/2008.

As per Government order No. FD 56 PWD cell 2004, Bngalore, 18th Janury 2005, The contractor shall be made responsible for submiting e-bills duly suported the hard copy of detailed measurements of work. using electrinic spreadsheets and making computation thereof. The conctractor shall submit diskette/ CD room in addition the hard copy

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form and which are should not be corrupted files. If it shows errors while opening the documents the employer is not responsible. Hence the such files will be considerd as un submitted.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25 achieved in One financial year should be more than financial turnover of Amount put Tender Amount (in all classes of civil engineering construction works only)

Tenderer must submit copies of documents according to KW-1&2 document

The Tenderer shall obtain Any Nature of Work done certificate will be Considered financial years of 2020-21 to 2024-25(25% of the Amount Put to Tender) i.e in the prescribed format from the Competent Authority not below the rank of Executive Engineer(District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid.

THIS WORK IS RANDOMISED AS SC CATEGORY OF WORK. HENCE ONLY SC CATEGORY OF CONTRACTOR SHOULD BID OTHER BIDDERS MAY BE CONSIDERED AS FRAUDULANT PRACTICES.

Single Tender Will Not Be Accepted

The Project Completion period is 4 Months and the defect liability period of the work is (2) TWO year after successful completion of the work. (including Monsoon).

Work Completion/Execution Period 4 Months

This work is Randomized under LOT10457 Sl No.01 and which is classified as :SC Category work. Hence this work is purely reserved for SC Category Bidders only.

For this work only eligible SC Contractor (with cast certificate) should apply

Videography and photographs in three stages should be taken and submitted along with the bill before starting, during execution and after completion of work in the presence of the section officer

All materials including complete with all lead and lift and as per the direction of Engineer in charge of work

All materials shall be of good quality as per specification, quality certificate for the same should be obtained from the concerned authority at their own cost.

After Completion of Work Third Party/SQM/DQM Inspection Reports Submitt with the Bills

Govt Order. No.FD 707 EXP-12/2024 BANGALORE DATE:05.11.2024

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹17,902

Important Dates

Last Activity

29 Oct 2025

Published

29 Oct 2025

Download Ends

3 Nov 2025

BOQ Preview

•

CONSTRUCTION OF ONE ROOM HIGH SCHOOL BUILDING IN HEGGUR VILLAGE, BILAGI TALUK

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming an...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

FORMWORK FOR COLUMN FOOTING

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

FORMWORK FOR COLUMN

•

FORMWORK FOR PLINTH BEAM

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

FORMWORK FOR COLUMN

•

FORMWORK FOR LINTEL, ROOF BEAM

•

FORMWORK FOR SLAB

•

FORMWORK FOR CHAJJA, RACKS

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 m...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Fixing of window frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

•

Providing and fixing hold fasts PWD CSR 2023-24 / VOLUME 2 / P. NO 218 / Materail Componet SI NO: 444

•

Providing and fixing Nails and screws

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Handles 200mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Aldrop 16mm dia, 200mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Tower Bolts 250x10mmm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargeSS hinges 125 mm

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge.SS Door stopper 75mm

•

Providing and fixing in position fully panelled shutters for windows with Honne wood stiles and rails of 30mm. thick, 75mm wide in two halves with panels provided with MDF of 18mm thic...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as specif...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work to give an even surface including preparing the surface after thorougly cleaning oil, grease, dirt and f...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and ...

•

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....

•

CONSTRUCTION OF ONE ROOM HIGH SCHOOL BUILDING (ELECTRIFICATION)IN HEGGUR VILLAGE, BILAGI TALUK

•

Supplying heavy gauge PVC conduit pipe .mm dia. .mm thick confirming to IS 2509 with suitable size bends, metal/ PVC Junction boxes, adhesive paste etc., and running before concreting the slab. The co...

•

Supplying heavy gauge PVC Conduit Pipe . dia.mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement pl...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep Junction box

•

Supplying And Fixing Metal Fan Box with Round Hook.

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 129332A DP Switch

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 12936/16A Universal Socket

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws. 80 /90mm

•

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size . mm conduit using necessary machine screws 110 mm

•

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 16A SP Switch

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of .feet -PVC Batten with integrated LED tube . W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power fact...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

19731 SC KW-1.docx

Tender Document • 1.85 MB

HEGGUR adm.pdf

Tender Document • 0.60 MB

Heggur technical.pdf

Tender Document • 1.38 MB

Heggur estimate.pdf

Tender Document • 12.96 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Cancelled

Works

Buildings

CONSTRUCTION OF ONE ROOM HIGH SCHOOL BUILDING IN HEGGUR VILLAGE, BILAGI TALUK

Rural Development and Panchayat Raj Department

RDPR Division Office Bagalakote | Karnataka

Amount: ₹16.9 LCloses: 5 Nov 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published29 Oct 2025
Cancelled29 Oct 2025