A. Providing wooden cabinet in Plant Diversity Systematics and Herbarium Division at NBRI, Lucknow. B. Supply, fabrication and installation of working platform with cupboards underneath in Lab (room No. 202) in main building at NBRI, Lucknow.

Amount

Supply, fabrication and installation of Working Table of size 1900x 760mm and 760 mm height comprising both side cupboards unit and middle will be open for leg space underneath table top. The top of the table will be 18mm black granite stone (pre-moulded and polished) over 12mm commercial ply Centaury/Archid or eqvt. make. The frames will be teak wood of section 750x40mm and panelled with 12mm commercial ply on all sides except front which will be 19mm commercial board Century/Archid or eqvt. make. The cupboards unit will have openable type shutter with single horizontal shelf with same material. All exposed exterior surface will be polished with French sprite polish and inner surface of cupboard unit will be painted with enamel paint of approved colour & shade over primer complete. The job includes parliamentary hinges, SS handle, teak wood lipping and MP lock Godrej/Link or eqvt. make. The work will be completed to entire satisfaction of Engineer In-charge.

Supply, fabrication and installation of wall mounted wooden storage rack of size 1900x670mm and 400mm deep having three nos vertical compartment with one nos horizontal shelf. Each compartment will have double leaf side hinged shutter. The unit will be made out of 19mm Commercial board Century/Archid or eqvt. make except back which will be 12mm thick commercial ply Century/Archid or eqvt. make. The all exposed surface will be provided 1mm thick laminate Century/Archid or eqvt. make except back. The remaining inner surface will be painted with synthetic enamel paint of approved colour and shade over wood primer. The job includes all T&P, parliamentary hinges, S.S. handle, magnet, MP Lock, nails screws etc. complete. The job will be completed to entire satisfaction of Engineer In-Charge (front area of the rack will be measured for payment).

Supply and fabrication of working table of size 2750x600mm and 760mm ht having cupboard and drawer unit underneath. The size of left side cupboard will be 1200mm in length and either side 900mm. In the middle portion will be leg space and to be used for opening of drawer. The unit will be made out of 19mm commercial board Century/Archid or eqvt. make except bottom of drawer. The cupboard unit will be in two compartments with horizontal shelf in middle having double leaf side hinged openable shutter. 1.00mm thick laminate will be provided on all exposed surface and the remaining surface will be painted with synthetic enamel paint of approved colour and shade over wood primer. The job includes all fitting such as T&P, parliamentary hinges, S.S. handle, magnet, MP Lock, nails, screws and teak wood lipping on edges of shutter etc. complete.

Supply, Fabrication & fixing in position wooden cupboard shutter under window sills made out of commercial board 19mm CENTURY/GREEN PLY or eqvt. make fixed/ screwed in proper position. The frame of the cupboard will be of same board. The shutters of the cupboards will be side hinged having second class teak wood lipping on edges 19x6mm. The one no horizontal shelf with same board will also be provided in the middle. The front will have laminate with 1.00mm thick mica Marino/IPL/Green Lam or eqvt. make and inner exposed surface will be painted with enamel paint two or more coat over one coat of wood primer. The job includes MP lock, parliamentary hinges, S/S handle, Ball Catcher etc. complete. The job will be completed to entire satisfaction of Engineer-Incharge.

Supply, fabrication and installation of Working Table of size 1900 x 600mm and 760 mm height comprising left side cupboards unit and right side drawer unit having 03 Nos drawer and middle will be open for leg space underneath table top. The top of the table will be 18mm black granite stone (pre-moulded and polished) over 12mm commercial ply Centaury/Archid or eqvt. make and frames will be teak wood of section 750x40mm and panelled with 12mm commercial ply on all sides except front which will be 19mm commercial board Century/Archid or eqvt. make. All exposed exterior surface will be polished with French sprite polish and inner surface of drawer and cupboard unit will be painted with enamel paint of approved colour & shade over primer complete. The job includes telescopic channel, Parliyamentry hinges, SS handle, and MP lock Godrej/Link or eqvt. make. The work will be completed to entire satisfaction of Engineer In-charge.

Supply, fabrication and installation of Working Table of size 1750 x 760mm and 760 mm height comprising Left side cupboards unit and right side drawer unit having 03 Nos drawer and middle will be open for leg space underneath table top with sliding keyboard. The top of the table will be 18mm black granite stone (pre-moulded and polished) over 12mm commercial ply Centaury/Archid or eqvt. make and frames will be teak wood of section 750x40mm and panelled with 12mm commercial ply on all sides except front which will be 19mm commercial board Century/Archid or eqvt. make. All exposed exterior surface will be polished with French sprite polish and inner surface of drawer and cupboard unit will be painted with enamel paint of approved colour & shade over primer complete. The job includes telescopic channel, parliyamentry hinges, SS handle, telescopic channel Hettich/Godrej or eqvt. make & MP lock Godrej/Link or eqvt. make. The work will be completed to entire satisfaction of Engineer In-charge.

Supply and fabrication of working table of size 1750x600mm and 760mm ht having cupboard and drawer unit underneath. The size of left side cupboard will be 1200mm in length and either side 900mm. In the middle portion will be leg space with provision of sliding keyboard and to be used for opening of drawer. The unit will be made out of 19mm commercial board Century/Archid or eqvt. make except bottom of drawer. The cupboard unit will be in two compartments with horizontal shelf in middle having double leaf side hinged openable shutter. 1.00mm thick laminate will be provided on all exposed surface and the remaining surface will be painted with synthetic enamel paint of approved colour and shade over wood primer. The job includes all fitting such as T&P, parliamentary hinges, S.S. handle, magnet, MP Lock, telescopic channel Hettich/Godrej or eqvt. make, nails, screws and teak wood lipping on edges of shutter etc. complete.

Note:- Rates should be quoted inclusive of all Taxes, GST etc.

Ajeet Kumar Sharma

Paramhans Traders

harpal singh