REPAIR TO INTERNAL PERIDICAL FALSE CEILING PLUMBING JOINERY FLOORING AND OTHER MISC WORK OF COD AND 505 ABW CICG AND OTHER MISC UNIT UNDER AGE BR I OF GE NORTH DELHI CANTT-10

Amount

M&L for preparation of old decorated internal wall surface by sand paper of required sizes , filling in wall care putty in holes existing or created ,again sand papering thus making surface smooth and One coat of oil bound distemper complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated internal wall surface by sand paper of required sizes , filling in wall care putty in holes existing or created ,again sand papering thus making surface smooth and two coat of oil bound distemper complete all as specified and all as directed by Engineer in charge .

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

M&L for ready mix plaster of 15mm thick on brick or conc surfaces in wall (External surface) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for ready mix plaster of 05mm thick on brick or conc surfaces of ceiling incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L for ready mix plaster of 10mm thick on brick or conc surfaces in wall (Internal surface) incl necessary cement slurry with builk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer complete all as specified and directed (Make Ultratech readiplast/ Birla Aerocon RMP/ ACC Suraksha RMP)

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified .

S & F in repair of 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each easing, and adjusting as required and re-fixing in same opening including renewal of screws complete , all as specified and directed by Engineer-in Charge.

Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 square metre each complete , all as specified and directed by Engineer-in Charge.

Taking down shutters of any description not exceeding 1 square metre each complete , all as specified and directed by Engineer-in Charge.

S&F rolled section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates incluidng welding 3 Nos MS butt hinges 100mm & 01 No 50mm complete (Butt hinges shall be measured and paid for separately).

M&L for factory made, 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a)

S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 18 mm thick PVC Board for kitchen cabinet/ cupboard one sided decorative lamination and other side balancing white sheet consisiting of carcass 18 mm thick PVC sheet fixed approved adhesive and self tapping screws and 20 mm wide and 1 mm thick PVC edges bending to paste on edges of PVC furnitures with suitable adhesive including all fittings and fixtures like SS shutter handle 100 mm size , magnet catcher on each pair of shutters ,door lock (Godrej) on each pair of shutters, 4 nos each auto closing hinges openable at 0 degree for each pair of kitchen shutter, ball bearing runners 45 mm telescopic chaneel (20 inch each pair ) full extension load capacity 50 kg, etc complete all as specified and directed. incl taking down old board. Make:- Rajshri.

S&Fin repairs steel windows with side hung shutter swith openable both glass and gauge shutters including pintel hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long and steel peg stay all as applicable, complete with glazing bars, glass/gauge, dovetailed or welded complete all as specified and directed. (Glass/Gauge shall be measured and paid separately).

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete in repairs , all as specified and directed by Engr-in-charge.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm cut to required size and fixed to wooden door/ steel window shutter with aluminium wire staples complete all as specified and directed.

S&F mild steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

Supply and fixing of mild steel cold rolled butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified.

All as above but 75mm.

S&F continuous M S CP piano type hinges 30mm flap (when opened ), bright finish or electrogalvanised complete all as specified.

S&F mild steel pressed steel handle, oval type, stove enamelled black 150 mm long complete all as specified.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates as in fixing of hold fast complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L Viterified ceramic tiles 10 mm thick square/rectangular dark shade)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed.

All as per item No 41 but on vertical surface as in skirting ,including 10 mm thick rendering in CM 1:3 even on fair faces of brick work complete all as specified and directed by Engr-in-Charge.

M&L for Non skid coloured ceramic tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L for 10 mm thick rendering as backing coat on fair faces of brick /concrete surfaces in cement mortar 1:4 and rough finished on vertical surfaces complete all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x250mm x 7 mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

S&F aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

S&F in repair galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified .

S&F rubber gasket for fixing glass pane all as specified.

S&F glass panes of plain sheet glass 5.50 mm thick of ordinary quality in square exc 0.50 sqm each pane all as specified.

S&F in repair 100 mm size butt hinges , extruded aluminum alloy ISI marked.

S&F in repairs drapery curtain rods Mild steel powder coated polished 20 mm dia incl brackets complete all as specified and directed.

S&F powder coated aluminium frame partition with frame of standard anodised aluminum section, of size 101.60 mm X 44.45mmX2mm,in vertical and horizonal members and glazed with5mm thick tinted prelaminated partical board interior grade both side laminated including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as specified and directed.

S&F Anodised aluminumalloy powder coated stantard hollow section for door including aluminium frame/ chowkhat with following specification including 12mm prelaminated partical board interior grade both side laminated/ 12mm thick PVC hollow snap beading,glazing clips, joining cleats , rubber gasket screws, 2 Nos aluminium anodised handles(150mm) in each door etc and other accessories complete incl taking down old door etc complete all as specified and directed .

S&F Anodised aluminum alloy powder coated standerd hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels,5mm thick tinted glass, glazing clips joint cleats,rubber gassket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mmX44.50mmX1.60 mm thickness. (b) sliding window section (channel):-40mmX18mm of 1.20mm thickness with locking arrangemeny. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50 micron. (3) make for PVC sheet :- sintex,Rajshree,Tata.

S&F in repair Viterous China wash hand basin white, flat back size 550 x 400 mm incl CI or Angle iron 50x50x6 mm brackets one No CP fancy Pillar tap 15mm bore , one No 32 mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed by Engineer in charge.

Supply and fix in repairs vitreous china water closet Squatt Pattern ) " Orissa pattern " size 580 x 440 mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet including lime concrete complete all as specified and directed

S&F in reapir hand shower (Helath faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) (Make Jaquar, Cat No ALD 577). Complete all as specified.

S&F in reapir angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified..

S&F in repair 15mm dia stopcock fancy type chromium plated with long shank and cup (concealed type)

S&F as in repair bib tap 15mm bore fancy type chromium plated all as specified.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity all as specified

S&F rotational moulded polyethylene water storage tanks capacity 500 liters ( cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tank of any capacity all as specified in SSR Part-I of including all accessories complete all as specified .

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including complete all accessories complete all as specified .

Demolition of brick/stone masonry built in CM. all as specified.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified.

S&F in rep Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 15mm bore pipe.

Taking up or down steel water tubing and connections including cleaning for refixing or removal from site 20 mm bore pipe.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

M&L 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

Refixing of old steel tubing and connections in new or old position ( wall/ floor/ ceilings etc) of size 15 mm bore

Refixing of old steel tubing and connections in new or old position ( wall/floor/ ceilings etc ) of size 20 mm bore

S&F in rep vitreous china wash down water closet pan (pedestal pattern),white (including fixing bolts, flushing cistern & flush pipe) incl black seat cover with necessary fittings all as specified and directed.

S & F prelaminated fire resistance PVC rigid foam sheet wall panelling of 5mm thick stck on inner frame of work of 35mm wide strio of 5mmm thick rigid foam sheet . The strip should have a groove of 6mm width and 2mm depth for sinking the head of screw used to fix the strips to the all and should be placed vertically at equal intervals of 300mm c/c. The PVC strips to be fixed to the all using 65mm long MS screw through the groove in the strip using PVC fasters including necessary moulding work on doors, windows, pillars and opening etc.complete all as specified and directed. Note :- (a) Work for fixing of wall panelling shall be got exeduted through manufacturers authorised appllicators only under the close supervision of their techanical staff. (b) The entire quantity of wall panelling and their ancillaries shall be procured directly from the manufacturer or their authorised dealer only.

Schedule of Credit - Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 28,140.00

DEEP ASSOCIATES

STAR CONSTRUCTION CO

SARTHEE CONSTRUCTION CO.

M/S AADI ENTERPRISES

QUALITY CONSTRUCTIONS CO

R. S. Associates

S GOURAV PRAKASH ENTERPRISES