Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹25.0 L
EMD Value
₹49,980
Closing Date
5 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE Agra
HQ CWE Agra, 112 Taj Road, Agra Cantt
PREVENTIVE MAINT, SERVICING OF EOT CRANE, EOT HOIST, LIFT and CONNECTED MISC WORKS UNDER GE (EAST) AGRA
2026_MES_798744_1
84454/E8
Open Tender
Civil Works
Item Rate
180 days
Agra
MES contractors enlisted for Class E and above and category c(iii) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
GE (East) Agra
₹49,980
14 Nov 2026
14 Nov 2026
12 Dec 2026
14 Nov 2026
5 Dec 2026
28 Nov 2026
14 Nov 2026 - 21 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Comprehensive preventive maintenance and making operational of EOT crane of capacity 2 to 5 tonnes, including all assemblies, checking and tightening of all nuts, bolts and checking, adjustment and servicing of all types of brakes and brake mechanisms, adjustment and setting of VFD/VVVF drives for smooth and controlled operation, greasing and oiling of all travelling and moving parts and checking the motors, girders and associated components for smooth movement of the hoist, long-travel and cross-travel mechanisms. The work shall also include checking and adjustment of speed controls, inspection and repair of the control pendant, checking of wire ropes, brake drum assembly, gearbox assembly and oil levels, inspection of motor beds/feet, electrical control cables, motor terminals, end cables and cable-carriage trolleys, identification and rectification of defects and faults, rectification of oil leakage, replacement of defective nuts, bolts and washers, and attending to abnormal noise and vibration to ensure smooth and quiet operation of the crane. After completion of the maintenance work, the crane shall be subjected to trial runs and operational testing to ensure satisfactory, smooth and safe functioning, complete all as specified and as directed.
Description of item Contd... | 27 | Each Job | 100 | ₹2,700 |
| 1.01 | Item No. 1 Contd....
Notes:
(i) Defective parts, wherever required, shall be measured and paid for separately under the relevant items in this Schedule.
(ii) Checking, repair, lubrication and testing shall be carried out in accordance with the manufacturer's instructions whenever directed by the Department. Complaints received from the user shall be attended to within 24 hours from the time of receipt of the complaint. A maintenance and testing report, duly indicating the work carried out and the operational condition of the crane, shall be submitted to the Engineer-in-Charge after each maintenance visit. In case of failure to attend to a complaint within the stipulated period, a recovery of ₹1,000 per day shall be effected (maximum recovery shall be upto quoted rate of this item), subject to the terms and conditions of the contract.
(iii) Grease, brake oil and gear oil shall be measured and paid for separately under the relevant items.
(iv) All minor electrical faults, including loose connections, incorrect phase sequence and similar defects, shall be rectified by the contractor at no extra cost to the Department. | - | - | - | - |
| 2 | All as per Item No. 1 above, but for comprehensive preventive maintenance and making operational of EOT crane of 10-tonne capacity, complete all as specified and as directed | 45 | Each Job | 10 | ₹450 |
| 3 | All as per Item No. 1 above, but for comprehensive preventive maintenance and making operational of EOT crane of 25-tonne capacity, complete all as specified and as directed | 54 | Each Job | 10 | ₹540 |
| 4 | Carrying out load and deflection tests of EOT cranes of capacities ranging from 2 to 25 tonnes at 100% of the rated safe working load, using suitable and calibrated instruments, including testing of the hoisting, long-travel (LT) and cross-travel (CT) mechanisms to verify the performance and satisfactory functioning of the crane, complete all as specified and as directed.
Notes:
(i) Load and deflection tests of all EOT cranes shall be carried out by the contractor through a duly licensed/authorised Crane Inspector, in the presence of the departmental representative and user representative, as directed by the GE. The test results shall be duly recorded, and the necessary test certificate issued by the licensed/authorised Crane Inspector shall be submitted to the Department.
(ii) The contractor shall arrange and transport the loads required for testing to the respective sites. The contractor shall also arrange the required manpower, calibrated testing instruments, equipment and internal transportation necessary for conducting the tests at different locations. | 16 | Each Job | 10 | ₹160 |
| 5 | S&F in replacement push-button type radio remote control unit suitable for EOT cranes of capacities ranging from 2 to 25 tonnes, complete with control functions for all crane motions, The radio remote control system shall provide multi-speed operation and shall operate on rechargeable batteries. The unit shall be supplied complete with two rechargeable batteries and a suitable battery charger, including testing and commissioning to ensure satisfactory operation, complete all as specified and as directed | 3 | Each | 100 | ₹300 |
| 6 | M&L for replacement of steel wire rope of 10/12 mm diameter, flexible metallic core (FMC) construction, 6 × 36, ungalvanised, conforming to IS 2266/02), including suitable rope clamps, fitting, securing, adjustment, tensioning and testing for safe and satisfactory operation of the EOT crane, complete all as specified and as directed | 72 | RM | 100 | ₹7,200 |
| 7 | M&L for replacement of steel wire rope of 24/26 mm diameter, flexible metallic core (FMC) construction, 6 × 36, ungalvanised, conforming to IS 2266/02, including suitable rope clamps, fitting, securing, adjustment, tensioning and testing for safe and satisfactory operation of the EOT crane, complete all as specified and as directed | 156 | RM | 10 | ₹1,560 |
| 8 | Dismantling the complete hoisting unit of capacity up to 3 tonne from the gantry, after disconnecting the electrical connections, including removal of damaged and unserviceable components, such as electromagnetic brakes, brake coils and the complete clutch assembly, for replacement, including reassembling the complete hoisting unit after replacement of defective components, hoisting and refixing the assembly on the crane girders, reconnecting the electrical system, checking and adjusting alignment, and carrying out trial runs and testing to ensure smooth, safe and satisfactory operation, complete all as specified and as directed
Note: Spare parts required for replacement shall be measured and paid for separately under the relevant items in this Schedule. | 10 | Each Job | 10 | ₹100 |
| 9 | Supply only hydraulic oil, grade HW 46, suitable for the hydraulic thruster brake of EOT crane, in sealed original containers, complete all as specified and as directed
Make: Electro/Servo/Power/Castrol | 100 | Ltrs | 10 | ₹1,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.13 MB
Tenderdocuments.pdf
Tender Documents • 0.51 MB
BOQ_896064.xls
BOQ • 2.01 MB
AppxG.pdf
Additional Documents • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .