REPAIRS TO ALUMINIUM WOODEN JOINERY PVC DOOR AND OTHER MISC BR WORKS AT OLD RS COLABA UNDER AGE BR II NW NAVY NAGAR OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Enginner-in-Charge.

S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Enginner-in-Charge.

S&F aluminium alloy wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.4 mm fixed with aluminium wire staples alu shutters complete all as specified and directed by Enginner-in-Charge.

S&F 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge.

S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge.

M&L aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (80 x 66 mm aparture ) complete all as specified and directed by Enginner-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge.

S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge

S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.

Taking down shutters of any description exc 2 sqm each with all fittings

S&F 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed

Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge.

S & F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two or three panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

S & F 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or aluminium wire staples and removing old beading, complete all as specified and directed by Engr-in-Charge.

S & F 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.

S&F 150 mm extruded aluminium handles, fabricated type anodised

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.

M&L for Preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by EIC.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed by Enginner-in-Charge.

M&L for Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed by Enginner-in-Charge.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Enginner-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the defence land etc complete all as specified and directed by Enginner-in-Charge.

M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not excceding 0.11 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.

M & L Coloured glazed ceramic tiles 300 x 200 x 6 to 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.

M & L Coloured glazed ceramic tiles 450 x300 x7 mm thick on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment

M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.

Complete removal of existing treatment from wall surfaces by scrapping, washing & applying two coat of Oil bound distemper of approved make on wall over a coat of wall priming paint over a coat of Birla white putty on plastered surface and filling the surface inperfections such as holes, dirt, fine cracks all complete including preparation of surfaces all as specified and as directed.

Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc. and removing debrish outside defence land complete all as specified.

M&L 20mm thick Granite (of any type) over 12mm thick backing coat in CM 1:4 machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-Charge.

Dismantling of MS grill of any description and position etc.

M&L for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete.

M&L for Preparation of new surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC.

Supply and fixing of 04 pieces pulley operated ceiling fitted Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and pipe size 6-8 feet with pulley made up of Devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 3.5 mm with rope Guide at locking system to hide rope and L Angle made of 20mm square MS pipe powder coated for fixing pipes. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs. Make : Easy dry or equivalent.

Removal of debries outside of MD land complete all as specified..

MAHABIR INDUSTRIAL PRODUCTS (INDIA)

SRI SAIRAM COUNSTRUCTION

satguruenterprises

SHRI SAI ENTERPRISES

SHREE JAGDISH FURNITURE CO.

NS Enterprises