EDMC/EE-(PR.)-II/SSZ/21-22/7.1

Amount

SIT-UP BOARD:- Providing and fixing Sit up Board made from "C" Class GI pipe. The main frame is of 25mm NB made from "C" Class GI pipe. FRP sheet of 3mm thickness is molded on main frame. The remaining frame of the sit up board is of 32mm NB made from "C" class GI pipe. The foundation pipes are embedded in C.C. stock and painting by color spraying after proper surface treatment. The top coat be done using the best quality brand paint or duly powder coated.

HORSE RIDER:-Providing and fixing Horse rider made from "C" class GI Pipe. The main frame of Ø60mm made from "C" Class GI Pipe, and The bottom support of M.S. round plate of Ø 250mm & 10mm thickness is welded at bottom. The leg movement frame is of Ø40mm made from "C" Class GI Pipe. The handle frame is of Ø32mm made from "C" Class GI Pipe. The foundation used for fixing is consists of three equal items i.e. 90mm made from'''C'' Class GI Pipe, M.S. Round Plate of Ø250mm & 10mm thickness & 25mm X 25mm M.S. angle of 3 mm thickness. The footrests is made from FRP/C.I.I Aluminum casting material, its sizes are 130mm X 310mm X 5mm. For the support 50 X 50mm X 2mm CRC square pipe is used. Closing Caps made from top quality FRP material with 2 mm thickness. The pins used are made up of Ø25mm bright bar. The bearings used are "6205zz" permanent lubricated sealed bearing of reputed make(SKF/FAG). High tensile steel with galvanized nut bolts are used for assembly. The serclips used for assembly are of Ø25 mm. The powder coat is done by Polyurethine & Epoxy powder with 60 to 70 micron thickness.

LEG PRESS:-Providing and fixing Leg Press made from "C" Class GI Pipe. The center pipe is of 100mm NB made from"C" Class GI Pipe, and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The remaining outer frame is of 40mm NB made from"C" class GI Pipe. The foundation used for fixing is consist of three equal items i.e. 80mm NB made from "C" class GI Pipe, M.S. Round plate of 250mm dia & 10mm thickness, 25mm X 25mm X 3mm M.S.angle. To join the centre pipe & outer frame seamless pipe of 130mm dia & 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330mm X 330mm of thickness 3mm & M.S. Plate of thickness 5mm and Size 250mm X 200mm is used to support it. The footrests is made from FRP/C.I.I Aluminum casting material, its sizes are 130mm X 300mm & 5mm thickness. The frame of footrests consists of 25 NB made from "C" class GI Pipe. Closing caps made from top quality FRP material which is of 2mm thickness. The inner bushes are made from seamless pipe, its diameter is 60mm & 8mm thickness. The pins used in are made up of 25mm diameter hardened bright bar. The bearings used are of "6205" permanent anqle don by attractive qolor spravinq after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated. To join the centre pipe & outer frame seamless pipe of 130 mm dia & 3mm thickness is used. The seats are fitted on the outer frame is made up of FRP material of size 330 mm X 330 mm of thickness 3 mm & M.S. Plate of thickness 5mm and Size 250mm X 200mm is used to support it. The footrests is made from FRP/ C.I./Aluminum casting material, its sizes are 130mm X 300mm & 5mm thickness. The frame of footrests consists of 25 NB made from "C" class GI Pipe. Closing caps made from top quality FRP material which is of 2mm thickness. The inner bushes are made from seamless pipe, its diameter is 60mm & 8mm thickness. The pins used in are made up of 25mm diameter hardened bright bar. The bearings used are of "6205" permanent lubricated sealed bearing of reputed make. The handles used are of Rubber grip. The Nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Polyurethin Plastic material of 50mm diameter. The serclipsed for assembly are of 25mm diameter. The Foundation pipes are embedded in C.C. stock and painting is lubricated sealed bearing of reputed make. The handles used are of Rubber grip. The Nut Bolts used for assembly are made from S.S. material. The bushes (stopper) used to avoid the collusion made from Polyurethin Plastic material of 50 mm diameter. The serclipsed for assembly are of 25mm dia meter. The Foundation pipes are embedded in C.C. stock and paintings.

CHEST PRESS:-Providing and fixing chest press made from "C" Class GI Pipe. The center pipe is of 100mm NB made from "C" Class GI Pipe, and the bottom support of M.S. round plate of 250 mm dia & 10mm thickness is welded at bottom. The remaining frame is made up of 40mm NB "C" class GI Pipe. The handle frame is made up of 25mm NB "C" class GI Pipe. The seat frame is made up of 40mm NB & 50mm NB "C" class GI Pipe. For the assembly different bushes are used which is made from 50mm with 3mm thickness seamless pipe & 50mm solid bar is used. The foundation used for fixing it consists of three equal items i.e100mm NB made from "C" Class GI Pipe, M.S. Round plate of 250mm dia & 10 mm thickness & 25mm X 25mm X 3mm M.S. angle. The seats is fitted on the outer frame is made up of high quality FRP material of size 330mm X 330mm of thickness 3mm & M.S. Plate of thickness 5 mm and Size 250mm X 200mm is used to Support it. Closing Caps are made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm & 17mm dia solid bar. The bearings used are of "6205" & "6203" permanent lubricated sealed bearing of reputed make. The nut bolts used for assembly are made from S.S. material. The serciips used for assembly is made up of 25 mm & 17mm dia. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated.

SHOULDER BUILDER/ARM WHEEL:-Providing and fixing Shoulder Builder made from "C" Class GI pipe. The Center Pipe is of 100mm NB made from "C" Class GI Pipe and the bottom support of M.S. Round plate of 250 mm diameter & 10mm thickness is welded at bottom. The handle movement frame is of 25 NB & 20 NB made from "C" Class GI Pipe. To Join the centre pipe & handle movement frame seamless pipe of 130mm dia & 3mm thickness is used. The foundation used for fixing consists of three equal items i.e. 100mm NB made from "C" class GI Pipe, M.S. Round Plate of 250mm dia & 10mm thickness & 25mm X 25mm X 3mm M.S. angle. Closing caps made from top quality FRP material which is of 2mm thickness. The pins used are made up of 25mm dia bright bar. The bearing used are of "6201" & "6205" permanent lubricated sealed bearing ofreputed make. The nut bolts used for assembly are made from S.S. material. The serciips used for assembly is of 25mm diameter. The Polyurethin plastic bush is used for handling. The foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated.

CROSS TRAINER/ELLIPTICAL EXERCISER:-Providing and fixing cross trainer made from "C" Class GI Pipe. The Center Pipe is of 80mm NB made from "C" Class GI Pipe, and the bottom support of M.S. Round plate of 250mm diameter & 10mm thickness is welded at bottom. The Handle Frame is made up of 25mm NB "C" Class MS Round Pipe. The Foundation used for fixing is consists of three equal items i.e. 100mm NB made from "C" Class MS Round Pipe, M.S. Round Plate of 250mm diameter & 10mm thickness, 25mm X 25mm M.S. Angle of 3mm thickness. To Join the Centre pipe & handle Frame Seamless Pipe of 50mm 00 & 3mm Thickness is used. For the movement, Bushes are used & for it 60mm 00 & 3mm thickness. The footrests is made from FRP/C.I./Aluminum casting material, its sizes are 130mm X 300mm & 5mm thickness. For support of Footrest of Cross trainer 130mm X 300mm with 5mm thickness M.S. Plate and 50mm X 50mm CRC Square pipe with 3mm thickness is used. Closing Caps made from top quality FRP material which is of 2mm thickness. The Pins used is made up of 25mm diameter hardened bright bar. The Bearings used are of "6205" permanent lubricated sealed bearing of reputed make. The handles used for cross trainer are of Rubber grip. The Nut Bolts used for assembly are made from S.S. material. The Foundation pipes are embedded in C.C. stock and painting is done by attractive color spraying after proper surface treatment, Shot blasting and initial coat of yellow primer surface is applied before top coat. The top coat is done using the best quality brand paint or duly powder coated.

DOUBLE TWISTER:-Providing & fixing Double Twister with DIMENSIONS: - 1700 mm(Length) x 540mm(Width) x 1250mm(Height). SAFE AREA: - 3 Mtr x 1 Mtr. Double Twister equipment made from "C" Class G.!. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimetres. The Center Pipe is of 100mm NB made from "B" or "C" Class G.I. Round Pipe. The M.S. round plate of Ø250 mm & 10mm thickness is welded at bottom. The standing frame of the Double twister is of 32 NB made from "B" or "C" class G.I. pipe. The handle frame of double twister is 25 NB. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB "B" or "C" class, Welded with M.S. round plate of Ø250mm & 10mm thick. Main pipe supported with 25mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. The Twister plate fitted on the standing frame is made up of M.S'. Round Plate of size 300mm diameter and 10mm thickness. Closing caps made from top quality Fiber reinforced Plastic material which is of 2mm thick. The Pins used are made up of Ø25mm MS bright material. The bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand (FAG/SKF). High tensile steel with galvanized nuts & bolts are used for assembly. The powder coating done with Pure Polyester powder with 60 to 70 micron thickness.

RUBBER TILE FLOORING:-Providing and fixing rubber tile flooring 25mm thick made of SBR (Styrene-Butadiene Rubber) with interlocking arrangments and adhesive all complete colour and size as approved by Engineer -in- charge

SIGN BOARD:-Supply & Installation of M.S. Sign Board 6ft. x 4ft., 1.5mtr. x 1.83mtr. size with support of 4570mm manufacturing, supplying retro reflecting sign board made of 2mm thick aluminum sheet.

PART-B:- 2.30.1:-Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5 m.All kinds of soil.

4.1.2:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size).

4.1.10:-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

KHALSA EXPORTS PRIVATE LIMITED

Radhey Mohan International