Construction of Central Tribal Administrative Complex at Peth Road, Nashik, Tal. and Dist. Nashik

Amount

Sub Estimate No. 1 : Tribal Office (P+8) Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 millimeter, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 millimeter in thickness.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in hard murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including leads and lifts.

Excavation for foundation in hard murum and boulders including removing the excavated material up to required distance beyond the building area, stacking breaking of boulder and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etcetera including removing the excavated material up to required distance beyond the building area, stacking and breaking of boulder to suitable size and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Providing and laying Cast in situ / Ready Mix cement concrete M-10 of trap metal for foundation and bedding including bailing out water if required, formwork, laying/pumping, compacting, finishing uneven and honey combed surface if required, curing etceteraetera. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with fine aggregate as finely washed Natural Sand / Vertical shaft Impactor Grade Crushed sand etcetera. complete as directed including all leads and lifts.

Filling in plinth and floors with approved excavated material including watering and compacting after laying them in layers of 15 centimetre to 20 centimetre etcetera complete as directed. (including all leads and lifts)

Providing dry trap rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etcetera complete as directed. (including all leads and lifts)

Providing Labour for dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimeter to 20 centimeter thick including hand packing and compacting etcetera complete.

Providing preconstructional antitermite treatment as per Indian Standard 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering, formwork ,cover blocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition. The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per is .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location. including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap metal forReinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal forReinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap metal forReinforced Cement Concrete chajja as per detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (I) Eighth Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap metal for Reinforced Cement Concrete pardi detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for Reinforced Cement Concrete pardi detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for Reinforced Cement Concrete Waist slab, and steps of staircases as per detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts. (E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing during laying in Reinforced Cement concrete Slab rectangular 2 millimetre thick Mild Steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre Mild Steel sheet fixed with 3.5 millimetre diametre round headed screws together with 12 millimetre diametre Mild Steel bar bent to shape with hooked ends for fan hook and painting to exposed surface etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying Cast in situ/Ready Mix M 30 grade cement concrete of trap metal for Reinforced Cement Concrete coping to plinth or parapet at terrace level and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge as required, laying / pumping, compacting, curing, finishing or roughening the surface if special finish is to be provided, curing with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with natural sand / Vertically Shaft Impactor quality Artificial Sand etcetera complete as directed. (Excluding reinforcement and structural steel). (including all leads and lifts) (I) Eighth Floor

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters TISCON, SAIL ,TATA Steel, RINL (Rashtriya Ispat Nigam Limited - Vizag), JSW or with embossing of Indian Standard Institution Trade Mark and Thermo Mechanically Treated T Brand at every 1.00 meter interval on every bar confirming to Indian Standard 1786 for Reinforced Cement Concrete footings, columns, beams, lintels, chajjas, canopies, slabs, staircase, waist slas, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with Galvanised Iron binding wires of appropriate gauge and supporting etcetera complete as required including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete. (B) First Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing expansion joints in Reinforced Cement Concrete framed structure (exterior column) with plain premoulded filler 25 millimeter thick with 75 millimeter wide and 1 millimeter thick stainless steel plate and finishing etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

Providing expansion joints in Reinforced Cement Concret framed structure (at floor level) with plain premoulded filler 25 millimeter thick with 75 millimeter wide and 1 millimeter thick stainless steel plat and finishing etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

Providing expansion joints in Reinforced Cement Concrete framed structure (at Terrace level) with premoulded filler 25 millimeter thick with 40 millimeter wide and 1 millimeter thick stainless steel plate as required, bitumen poured filler and finishing etcetera complete as directed. (I) Eighth Floor

Providing fly ash brick masonry with conventional / Indian Standard type fly ash bricks in Cement Mortor 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete as directed including all leads and lifts.

Providing and constructing masonry in Autoclaved Areaclaved ( Celluar) Concrete Block of aproved manufacturer (Siporex / Ultratech / Magicrete / ecolite / everest / Aerocon ) confirming to Indian Standard 2185 Part III 1984 of size 625 x 240 x 225 millimetre in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent for walls in superstucture including, striking joints, racking out joints watering and scaffolding etceteracomplete as directed including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer (Siporex / Ultratech / Magicrete / ecolite / everest / Aerocon ) confirming to Indian Standard 2185 Part III 1984 of size 625 x 240 x 100 millimetre in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in half brick thick partition walls including 2 hoop iron strips 25 millimetre x 1.6 millimetre at every third course, properly bend and bonded at ends scaffolding racking out joints and watering etcetera compete as directed including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing internal cement plaster 12 millimeter thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick or Autoclved Areaclaved Concrete bloack surfaces in all positions including scaffolding and curing etcetera complete as directed. (including all leads and lifts) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete including all leads and lifts. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying gypsum plaster (with Gypsum material of Gypsum India / Mega Sign or equivalent make) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying two coats of wall care putty of approved make on plastered surface and ceiling and walls to prepare surface even and smooth to receive painting , etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete including all leads and lifts. (A) Parking Floor

Providing waterproof plaster in Water Closet and bath 20 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete as directed. (including all leads and lifts) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (A) Parking Floor

Providing patti/ band 150 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick at terrace level in Cement Mortor 1:3 in line and level including neat finishing, scaffolding, curing etcetera complete as directed. (I) Eighth Floor

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick/ Autoclaved Areaclaved Concrete block work, of approved quality including fixing mesh in position by necessary drilling in concrete / Burnt Brick masonry/ Autoclaved Areaclaved Concrete block masonry and/ or tying by binding wire etcetera complete as directed including all leads and lifts.

Providing and laying in situ cement concrete M30 with tremix treatment for 200 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etcetera complete as directed including all leads and lifts. (A) Parking Floor

Providing and laying in situ cement concrete M20 with tremix treatment for 100 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etcetera complete. (Including all leads and lifts as directed) (B) First Floor

Providing and laying vitrified matt fininsh tiles having size 900 millimetre x 900 millimeter of 8 to 10 millimeter thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etcetera complete (Including all leads and lifts) a) Flooring (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size, 18 millimetre to 20 millimetre thick for flooring on ground floor at approved location on bed cement mortar 1:6 including cement floats striking joints, pointing in Cement Mortor 1:3 curing and cleaning etcetera complete as directed. (Including all leads and lifts) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14millimeter thick, 1800 millimeter length (minium) and 130 millimeter wide (minimum), in approved colour, texture and finish, having Performance Appraisal Certified (PAC) issued by Building Materials and Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4 millimeter thick expanded poly ethylene foam sheets having density 40 killogram per One Cubic metre, over prepared surface with necessary quarter round planks of size 1900 millimeter x 18 millimeter and door reducer of size 1900 millimeter x 44 millimeter, whereever required. The bamboo wood planks shall have minimum density of 1000 killogram /One Cubic metre and minimum Hardness 1000 killogram force with Eco friendly Ultra Voilet coating, all complete as per direction of Engineer in -charge. Ground floor (I) Eighth Floor

Providing and laying Antiskid Ceramic tiles of approved quality of company Johnson /RAK / Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre and confirming to Indian Standard 15622-2006 (Group-B HA) for antiskid flooring in toilet area laid on a bed of cement mortar 1:4 including cement float, filling joint with cement slurry cleaning curing etcetera complete as directed. (Including all leads and lifts) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying vitrified matt finish tiles having size 900 millimetre x 900 millimetre of 8 to 10 millimetre thickness and confirming Indian Standard 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etcetera complete. (Including all leads and lifts) b) Skirting (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying machine cut machine Polished Kota stone flooring 25 millimetre to 30 millimetre thick and required width in plain/ diamond pattern on bed of 1:6 Cement Mortor including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete. (Including all leads and lifts) (G) Sixth Floor

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimeand meter rooms including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning etcetera complete as directed. (Including all leads and lifts) (G) Sixth Floor

Providing and laying ceramic tiles having size 30 centimetre x 60 centimetre confirming to corresponding India Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete. (including all leads and lift) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying vitrified mirror / glossy finish tiles having size 590 milimetre to 605 milimetre x 590 milimetreto 605 mm of 8 to 10 milimetre thickness and confirming to Indian Standard 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. (Including all leads and lifts) (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick of approved color and shade for boxing to toilet doors, window and ventilator frames etcetera at approved locations on Cement Mortor 1:6 including filling joints with polymer base filler, moulding / nosing the sharp edges wherever necessary, curing, cleaning etcetera complete as directed including all leads and lifts. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of Cement mortar 1:4 including float filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20 % allowing to dry for 6 to 8 hours. After applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45 % or 65 to 70 % by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etcetera) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 killogram per 15 liltre). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Country Cut Teak Wood (CCTW) frame with / without ventilator of size as specified with for main door on ground floor including chamfering, rounding, rebating, iron holdfast of size 300 millimetre x 40 millimetre x 5 millimetre with oil painting, etcetera complete including all leads and lifts (B) First Floor

Providing and Fixing Door Frame Made out of 12 and 18 millimetre Plywood with Mica Laminate (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing M-40 grade precast concrete door frame of size 60 millimetre x 100 millimetre vibrated pull cast or similar type with chamfer conforming to Indian Standard 6524-1983 having 6 millimetre diametres bars 3 Numbers and stirrups @ 250 millimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 millimetre diametre bars 500 millimetre long including cleaning the frame surface, necessary primer and oil painting of appoved make & colour shade etcetera complete as directed including all leads and lifts. (I) Eighth Floor

Providing and fixing Country Cut Teak Wood (CCTW) Four leaf paneled shutters, 35 millimetre thick style and rail and 25 millimetre thick panels without ventilator for main door on ground floor as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete as directed. (B) First Floor

Providing and fixing solid core flush door shutter in double leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etcetera complete. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing of Tufwud make Accoustic Door to effectively control noise inconference rooms, broadcasting studios, theatres and music practice rooms. with prior approval of concerned Superitending Engineer. a) Door Frame : Providing Frames for Accoustic door shutters with double rabbit of 68 millimeter 1st class Malaysian Hardwood Frame densified and pressure treated with chemicals in vacuum impregnation vessel under 160 Pounds per Square Inch pressure as per Indian Standard : 401 and kiln seasoned to moisture below 15 % as per Indian Standard : 1141 of section 120 X 70 millimeter spray quoted with 2 coats of In tumescent paint of minimum 200 micron, with 1 row of Hafele Accoustic seals concealed in the groove of the Frame for noise control, etcetera complete as per direction of Engineer in Charge. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(I) Eighth Floor

Providing of Tufwud make Accoustic Door to effectively control noise inconference rooms, broadcasting studios, theatres and music practice rooms. with prior approval of concerned Superitending Engineer. b)Shutter : Providing of 65 millimeter thick Accoustic Door Shutters with wooden structure comprising of Chemical treated internal timber with anti termite chemicals in pressure impregnation vessels under 160 Pounds per Square Inch pressure as per Indian Standard : 401 and kiln seasoned to moisture below 15 % as per Indian Standard : 1141 frame work of 100 x 48 millimeter with 48 millimeter thick infill of ceramic vermiculite mix of density 54 Killograms/Cubic Meter, 3 millimeter sheet rubber interlayer sheet on one side for acoustic property, faced with 6 millimeter High Density Waterproof Ply confirming to Indian Standard Code 2201, internally lipped with hardwood beading, and pasted in Hydraulic Press under 50 tonnes pressure, spray quoted with 2 coats of Poly Urethane paint of minimum 200 micron of color of engineer choice (any Veneer or Lamination will cost extra), without any external lipping along with double rebatting in shutters and accoustic seal. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(I) Eighth Floor

Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, approved chromium plated fixtures and fastenings with brass mortise lock, approved chromium plated handles on both sides and finishing with french polish etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Indian Standard Institute marked double swing flush door shutters conforming to Indian Standard :2202 (Part I) Non-decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 millimetre thick including Indian Standard Institute marked Stainless Steel L- hinges with necessary screws Fittings and Fixtures per leaf Stainless steel kick plates on both sides of the door of 300 millimetre height Heavy Duty satin finish butt Stainless Steel Hinges (100 millimetre x 75 millimetre x 3 millimetre in size) - 4 numbers Stailess Steel finished lever handle with mortise lock- 1 number Floor spring- 1 Number 100 millimetre x 100 millimetre safety glass at the specified location. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

Providing and fixing fiber glass reinforced polyster door shutter 30 millimetre thick as per Indian Standard 14856 (2000) (Reaffirmed 2006) without ventilator including approved chromium plated fixtures and fastening with chromium plated handles on both sides, etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing in position colour anodised aluminium fixed window fully glazed in 2 half parts (top and bottom) for ventilators at approved locations as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening such as 5 millimetre thick clear float glass and stainless steel jali between top and bottom part with powder coating of approved shade and thickness etcetera complete as directed. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

a) Supplying and fixing in position Powder Coated Aluminium four track sliding windows with outer frame made from section of over all size 122 millimetre x 45 millimetre, bottom section with drain section track weighing 1.83 Kilogramper metre and top and side section of size 122 x 31.75 millimetre weighing 1.15 Kilogramper running metre with shutter sections made of 18 millimetre x 40 millimetre size having average weight of 0.6 Kilogramper running metre (or as required size) with change in proportionate weight, with 6 millimetre float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per Running metre. with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per Running metre. Top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per Running metre. The shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per Running metre. Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per Running metre. and handle and top section 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera complete. With powder coating with box (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing mild steel grill work for windows, ventilators etcetera 20 Kilogram Per One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing in position Gypsum board false ceiling with 12.5 millimeter thick Gypsum boards, screwed / fixed to the under structure of suspended Galvanised Iron Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 millimeter maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etceetera all complete. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595 millimetre x 595 millimetre having 15 millimetre thick densified micro look edge and 100 % humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 watt/meter 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x 600 millimetre made from hot dipped Galvanized Iron steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42 millimetre x 14 millimetre between main tee 600 millimetre center-tocenter and secondary cross T of size 33 x 14 x 0.43 millimetre thick of length 600 millimetre long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200 millimetre x 600 millimetre resting on periphery wall Profile wall section 19 millimetre (7+7) x 19 millimetre x 0.40 thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, smoke detectors etceterea, wherever required. Main T runners suspended from ceiling with using Galvanized Iron soffit cleats of size 25 x 35 x 1.6 millimetre of required length fixed to the ceiling with 6 millimetre diameter and 50 millimetre long dash fastener, 4 millimetre diameter Galvanized Iron adjustable rods with powder-coated/good quality Galvanized Iron level adjustment clips of 35 x 35 x 0.8 millimetre spaced @1200, center-to-center along main T all complete at all heights as per the specifications, drawings and as per the directions of Engineer-in-charge. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Kitchen Trolley : Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes, trolley basket made out of 5 millimetre stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40 killogram load bearing capacity of trolley made out of 20 millimetre Poly Urethane coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica, 100 millimetre Stainless Steel decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer-in-charge). (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

Providing and constructing granite kitchen platform on ground floor at approved location with fixing of stainless steel sink 600 millimetre x 450 millimetre size of as per detailed drawing including polished kadappah stone 25 to 30 millimetre thick vertical supports on both side and intermediate vertical support at suitable distance of polished kadappah stone 25 to 30 millimetre thick with kadappah top 35 to 40 millimetre thick and polished granite 16 to 20 millimetre top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 centimetre height and top granite of 75 x 40 centimetre including cutting, opening for sink of required size in kadappah as well as granite including half round moulding to granite slab at sink etcetera complete as directed including all leads and lifts. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 millimetre diametre and vertical pipe of 38 millimetre diameter at 0.60 metre centre to centre or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diametre above newel post of 75 millimetre diameter etcetera complete. (Prior approval of sample and brand by Executive Engineer is necessary before use) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing 900 millimeter high Stainless Steel 304 Grade Stainless steel railing with 40 millimeter diameter and 1.5 millimetere thick at top, 40 millimeter diameter and 1.5 millimeter thick vertical supports spaced at 1.5 meter center to center and 8 millimeter thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Glass Reinforced Concrete (GRC)/Fibre Reinforced Polyster Medallions to be made in CNC cut Glass Reinforced Cement(GRC) Jali of different sizes circular or elliptical as shown in the drawing or indicated by the Architect as mentioned below with all profiling. Item includes preparing upto 5 samples for the Architects approval. Item to include making of the clay model and mould for the decorative cornice and supply of the decorative cornice as per approved sample executed in fiber glass material etcetera complete. Specification Number As directed by Engineer in charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Puf Roof Panel: Sandwich panel for roof 50millimetre thick (puf) The base material being Mangalore Tile shape profile Pre - painted coating. External face brick Red. PCT 0.4millimetre Cover Width of the panel will be 990millimetre. Crest height of 30millimetre pitch of 198millimetre. The length of panel as per site length requirement. the side lapping and over lapping joints of the self supporting panels shall be vapour tight . The PUF panels external and internal sides have guard film protection and confirmd Indian Standard - 12436-1988. The to sheet have profiled and bottom sheet have micro rib finishing, thermal conductivity of 0.024 watt /meter k. Density shal be 40+/- 2 kilogram per metrecube CFC/HCFC free Installation shal be Using Hourse Power or equivalent Hex head self drilling Screws with washer 12-14*100millimetre size or as required. Make : Therm:shield Include Ridge Tiles of width 990 millimetre and end batterns (Eaves Board) (I) Eighth Floor

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded Ultra Voilet protected multicell panels incorporated into a complete system. Co-extruded Ultra Voilet protected polycarbonate panel system of min 12 millimetre thick of 900 millimetre (minute.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility and strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on Mild Steel structure (will be paid Separately) with 3 numbers self-drilling screws and trapezoid Stainless Steel fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000 Newton (7Kilo Newton) tested as per Indain Standard Organisation 6892:1998 and Indian Standard 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per Indian Standard 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to Ultra Voilet for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to Ultra Voilet for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 Watt per square metre K as per EN Indian Standard Organisation 10077-2:2018. (I) Eighth Floor

Providing Waterproofing Treatment to new terrace by using Chlorinated paraffinated talcum polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge. , followed by average 112 millimeter thick brick bat coba covered with 40 millimeter thick Indian Patent Stone. The procedure includes fillng of cracks on the Reinforced Cement Cncrete slab with high performance polyurethane (liquid appiled) membrane. Clean the entire surfec thoroughly and over this prepared surface , apply a primer coat of high performance polyurethane (liquid applied) membrane as approved by Engineer incharge. Apply he primer by roller. Extend the coating to parapet walls including the top of parapet . Alow the primer coat to set for 24 hours. After the primer coat is set , apply two coats of clorinated paraffinated talcum polyurethane (CPTP) Elastomeric membrane as approved by Engineer incharge on surface. (including all leads and lifts)Ensure that pinholes are touched up properly. while the second coat og high performance polyurethane (liquid applied) membrane is wet and taky , sprinkle coarse sand over the surface to make it rough and provide mechanical key for further treatment. Provide and lay average 50mm thick protective coat of Cement Mortar in 1:4 over the surface and allow to set and cure. Provide and lay 112 millimetre thick Brick bat coba in average thickness in cement mortar 1:5 with one pouch of 330 grams of thorough blend of special cement , adlehyde based polymer , shrinkage compensating agents as approved by Engineer incharge per 50 kilogram bag of cement and finshing with 40 millimetre thick Indian Patent Stone layer in M20 Cement Concrete by miing one pouch of 330 grams of above admixtures per 50 kilogram bag og cement , including all leads , lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta , bevel of champhered portion at the junction of parapet and work upto height of 300millimetre or as directed and including finishing the top layer of water proofing treatment. with false marking of 30 centimetre X 30 centimetre or as directed , curing and covering the whole treatment. The liqud membrane should have a track record of at least 4 years in india and have atleast an 4 year track record in PWD .Single component, liquid applied, chlorinated paraffinated talcum polyurethene( CPTP) elastomeric membrane should have following minimum properies :1) Water Permeability (DIN 1048 ): Nil as per DIN 1048 @ 7 bar of Hydrostatic pressure. 2) Moisture permeability : <0.4 grams per Square metre per day 3) Accelerated weathering (Indian Standard 101) : 2000 hours no cracking / blister formation 4) Adhesion to concrete (ASTM D 1000 ) :>21 kilogram per cubicmetre 2 (concrete fails) 5) tensile strength :> 2.0 Mega Pascal (ASTM D412 ) 6) should not be watered soluble are water dilutable 7) Shore a hardness : 40+_ 5 (ASTM D2240 ) 8) Elongation at break : > 900 percent (ASTM D 412 ) 9) Solids : > 95 percent 10) No micro -bubble formation or blistering should take place during the curing of thick films. (C) Second Floor

(D) Third Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Waterproofing Treatment to new Toilet/bathroom by using Polymeric Cementitious Membrane as approved by Engineer in charge, followed by 112 millmetre thick brick bat coba covered with 20 millimetre mortar finish. If there are cracks on the bare slab, open the crack in V Groove and fill it with ready to use repair polymer modified mortar based on special cements, aldehyde based polymers with thixotropy modifying agents. If there are lots of honeycombs and identified bad patches of concrete the same should be grouted as per the instructions of site incharge. (The grouting shall be paid separately). Clean the entire surface thoroughly and over this prepared surface, apply three coats of polymeric Cementitious waterproofing coating having a non-toxic, 2-(methoxycarbonyl)-1-propene-Butyl-2 propenoate (MPBP) based polymeric waterproofing solution as approved by Engineer in charge. Provide and lay 112 millimetre average thicknes of brick bat coba in cement mortar 1:5 over 12millimetre thick Cement Mortar 1:3 bedding with one pouch of 330 grams of thorough blend of special cements, aldehyde based polymers, shrinkage compensating agents as approved by Engineer in charge per 50 Kilogram bag of cement and finishing with 20 millimetre thick cement plaster in cement mortar 1:3 by mixing one 330 grams pouch of above admixture per 50 Kilogram bag of cement, including all lead, lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta, beveled or champhered portion at the junction of wall and work up to a height of 300 millimetre or as directed and including finishing the top layer of waterproofing treatement with false marking of 30 centimeter x 30 centimeter or as directed, curing and covering the whole treatment. MPBP Polymeric Waterproofing Coating for Concrete and Masonry should have following minimum properties:1) Elongation percent (ASTM D412-2016): @ 100 percent 2) Tensile Strength Newton per Square millimetre (ASTM D412- 2016): 3.3 3) Specific Gravity: 1.02 ± 0.02 4) Total Solids (ASTM D1644-2012): 43.98 5) Hardness Shore A (ASTM D2240-2015): 82 (including all leads and lifts) (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and Fixing in position, Acoustical Panelling made from Fabric wrapped Compressed polyester fibre nonwoven 9 millimetre panels on, 50 x 50 millimetre sal-wood frame of 600 x 600 centre to centre having wooden supports from wall of required length, in front of 1000 gram synthetic wool 50 millimetre thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects.including all materials labour, finishing etcetera complete. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and Fixing in position, Acoustical Ceiling made from Gypsum Plain Panels on approved heavy duty Galvanized Iron frame ceiling channels at 450 centre to centre, and intermediate channels not more than 1200 centre to centre, along with ply wood forms suspended with Hangers from Roof, in front of 1000 Grams per Square Metre synthetic wool 50 millimeter thick, with Paint, including cost of required Cut-Outs, decorative mouldings / finishing-items and Scaffolding, as per Architectural and Acoustical Design and Instructions and Complete in all aspects.including all materials labour, finishing etcetera complete. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing, laying and fixing Poly Vinyl Chloride pipe of 40 millimetre diametre with fittings such as bends, tees, reducers, clamps, etcetera including necessary excavation, trench filling etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing, laying and fixing Poly Vinyl Chloride pipe of 50 millimetre diametre with fittings such as bends, tees, reducers, clamps, etcetera including necessary excavation, trench filling etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

Providing and fixing 75 millimeter diameter stabiliser pipe/ Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete.

Providing and fixing 100 millimeter diameter stabiliser pipe/ Poly Vinyl Chloride soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete.

Providing and laying in trenches 40 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain / Astral make for water supply including necessary excavation, fittings. Refilling trenches etcetera complete as directed.

Providing and fixing on walls / ceiling / floor 15 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ceiling/floor 20 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ceiling/floor 25 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ ceiling/ floor 32 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ ceiling/ floor 40 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ceiling/floor 50 millimetre diametre Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ceiling/floor 20 millimeter diameter Unplasticized Poly Vinly Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ ceiling/ floor 25 millimeter diameter Unplasticized Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ ceiling/ floor 32 millimeter diameter Unplasticized Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls /ceiling/ floor 40 millimetre diaemter Unplasticized Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing on walls/ ceiling/ floor 50 milllimeter diameter Unplasticized Poly Vinyl Chloride pipe with necessary fittings, remaking good the demolished portion etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and making Indian Standard Institute Mark ferrule connection of 32 millimetre diametre to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete.

Providing, laying and fixing Poly Vinyl Chloride pipe of 110 millimetre diameter of Finolex/ Supreme/ Jain /Astral make for soil / vent pipes including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clamps nut bolt with fittings such as bends, tees, reducers etcetera including necessary excavation, trench filling etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Poly Vinyl Chloride Rain water pipes of 160 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre of Finolex/ Supreme/ Jain /Astral make confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Vinyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clamps nut bolt of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Vinyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment) (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing, laying and fixing Poly Vinyl Chloride pipe of 75 millimetre diametre of Finolex/ Supreme/ Jain /Astral make for soil / vent pipes including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clamps nut bolt with fittings such as bends, tees, reducers including necessary excavation, trench filling etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Chromium Plated a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete as directed by Engineer in charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Chromium Plated BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Chromium Plated Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing push cock (Self closing tap) symet type of 15 millimetre diameter including necessary socket, testing etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing 25 millimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber].

Providing and fixing orissa type colour glazed earthenware 625 x 450 millimeter water closet pan including trap, Cast Iron soil and vent pipe upto the out side face of wall including 100 millimeter diameter Cast Iron plug, bend, 15 millimeter thick 10 litre Poly Vinyl Chloride flushing cistern with all necessary pipe connection etcetera complete (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing white european type wall-hung pan, of size 350 millimeter X 355 millimetre X 570 millimetre concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung Water Closet, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100 millimetre diameter Cast Iron plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32 millimetre diameter Poly Vinyl chloride flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap and soil pipe connection upto the outside face of wall etcetera complete as directed by Engineer in charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition both side polished of approved colour and shade with rounding the edges etcetera complete as directed. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet including 6 litre capacity white vitreous china flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 centimetre and one no Stainless Steel 304 hinged rail 76 centimetre and three no Stainless Steel 304 of (Grab Bar) 60 centimetre all including cutting and making good the walls and floors wherever required, seat cover, cistern and wash basin fittings,nuts, bolts and gasket etcetera complete of make Hindware (Matrix series 70002)/ Cera or equivalent as per the direction of Engineer-In-charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

Providing and fixing sink cock with regular swinging spout (Wall Mounted Model) with wall flange with approved make incluidng other necessary fitting, etcetera complete as directed by Engineer in charge. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

Providing and fixing 10 centimetre Poly Venyl Chloride Nahani Trap with grating etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing chromium plated towel rod 16 millimetre diametre and 75 centimetre in length including all accessories complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Glass self 125 millimeter wide and 600 millimeter long with necessary chromium plated brackets providing Teak Wood gutties etcetera complete. (C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16 milimetre diametre nickel plated towel rod etcetera complete. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame of any size over inspection chamber etcetera complete (Prior permission of Superintendent Engineer is to be obtained before inclusion of this item in the estimate)

Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap etcetera complete as directed.

Providing and constructing Brick Masonry Inspection Chamber 60 centimeter x 45 centimeter With Reinforced Cement Concrete raft in Black Cotton soil area including cost of reinforcement, 1:2:4 cement concrete channels half round Glazed Stoneware pipes, Brick Masonry, plastering from inside and airtight 75 millimeter thick Reinforced Cement Concrete cover medium duty 100 killogram etcetera complete. (including all leads and lifts)

Providing and constructing Brick Masonry Inspection Chamber 90 centimeter x 45 centimeter With Reinforced Cement Concrete raft in Black Cotton soil area including cost of reinforcement, 1:2:4 cement concrete channels half round Glazed Stoneware pipes, Brick Masonry, plastering from inside and airtight with 75 millimeter thick Reinforced Cement Concrete cover medium duty 140 killogram etcetera complete. (including all leads and lifts)

Providing and fixing 40 milimatre dia Ball cock medium type with Poly Vinyal Chloride float including sockets and necessary fittings and tested as per municipal requirements etcetera complete. (I) Eighth Floor

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres (I) Eighth Floor

Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats.

Providing and fixing Chromium Plated wall mixer with provision for overhead shower with 115 millimetre long bend pipe and wall flange of approved make including necessary sockets/union nut etcetera complete. (I) Eighth Floor

Providing and fixing Table top white wash basin of size 120 x 635 x 405 millimetre rubber plugs and brass chain, with pillar cock, Chromium Plated Angular stop cock long thread, continental including Stainless Steel bottle trap of approved make having necessary pipe connection up to theoutside face of the wall etcetera complete as directed by Engineer in charge. (A) Parking Floor

(B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and laying concrete pipes of Indian standard NP 2 class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench etcetera complete as directed including all leads and lifts

Providing and fixing in position Unplasticized Poly Vinol Chloride ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to IS.-4985 including making joints with solvent cement etcetera complete (I) Eighth Floor

Providing and fixing lightening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25 millimeter dia. 1.2 millimeter thick with multiple points head 1.2 metre long ( Heavy Duty) welded or clamped to Galvanised Iron pipe pole B grade 50 millimeter diametre of requiired length with Mild Steel round bnase plate 25 centimetre diametre and 10 millimeter thick at bottom embeded in cement concrete 1:3:6 foundation of size 45 centimetre diametre x 45 centimetre Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 centimetre with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kilogram charcoal and salt with altemate layers of charcoal and salt and Galvanised Iron pipe 40 millimeter diametre 2 meter length burried in earth upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropm lightening conductor is not considered in this item.

Providing and fixing copper strip 25 millimeter wide and 3 millimeter thick for lightening conductor including fixing with screws required scaffolding etceteracomplete Note- Lightening conductor and earthing pits is not considered in this item

Conveying materials obtained from road excavation including all lifts and lead of over 5Kilometre from the site of excavation to the site of deposition as directed.

Providing and fixing in position Powder Coated aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening such as 6 millimetre thick toughened glass etcetera complete. (B) First Floor

(C) Second Floor

(D) Third Floor

(E) Fourth Floor

(F) Fifth Floor

(G) Sixth Floor

(H) Seventh Floor

(I) Eighth Floor

Providing and Fixing Mat finish Stainlesss Steel (School Building Name) 30 to 45 Centimetre Height As Directed by Engineer-in-Charge including Labours, Material, Cleaning, Scaffolding, all leads and Lifts etcetera Complete.

Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10centimetre height letter, figures including painting the lefters / figures with approved colour and shade etcetera complete as directed.

Sub Estimate No. 2 : RCC Compound Wall Excavation for foundation in earth, soil of all types, sand, gravel and soft murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Providing and laying Cast in situ / Ready Mix cement concrete M-10 of trap metal for foundation and bedding including bailing out water if required, formwork, laying/pumping, compacting, finishing uneven and honey combed surface if required, curing etceteraetera. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with fine aggregate as finely washed Natural Sand / Vertical shaft Impactor Grade Crushed sand etcetera. complete as directed including all leads and lifts.

Providing and laying in situ /Ready Mix cement concrete Mix 20 oftrap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering, formwork ,cover blocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of Mix 35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal forReinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix M 20 grade cement concrete of trap metal for Reinforced Cement Concrete coping to plinth or parapet at terrace level and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge as required, laying / pumping, compacting, curing, finishing or roughening the surface if special finish is to be provided, curing with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with natural sand / Vertically Shaft Impactor quality Artificial Sand etcetera complete as directed. (Excluding reinforcement and structural steel). (including all leads and lifts)

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters TISCON, SAIL ,TATA Steel, RINL (Rashtriya Ispat Nigam Limited - Vizag), JSW or with embossing of Indian Standard Institution Trade Mark and Thermo Mechanically Treated T Brand at every 1.00 meter interval on every bar confirming to Indian Standard 1786 for Reinforced Cement Concrete footings, columns, beams, lintels, chajjas, canopies, slabs, staircase, waist slas, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with Galvanised Iron binding wires of appropriate gauge and supporting etcetera complete as required including all leads and lifts.

Providing fly ash brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera Complete as directed including all leads and lifts.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete as directed. (including all leads and lifts)

Providing patti/ band 150 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick at terrace level in Cement Mortor 1:3 in line and level including neat finishing, scaffolding, curing etcetera complete as directed.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding Indian Standard of Asian / Nerolac / Berger/ Dulux/ Shalimar make and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete as directed.

Providing and fixing mild steel grill gate with angle iron frame 65 millimetre x 65 millimetre x 10 millimetre with iron bars at 150 millimetre Center to Centre and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram per Squaremetre.

Providing and fixing bituminous pad 25 millimetre thick for expansion joints in retaining wall, compound wall etcetera complete.

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 millimetre diametre Galvanised Iron pipe ( Rezan/ concentina ire 0.75 millimetre diametre ) with hot dip and Galvanised Iron coated hooks as per drawing supported on Mild Steel angle 50 x 50 x 6 millimetre at 2.5 Metre centre to centre including fixing and fastening with wire, painting Mild Steel angles with one coat of red lead primer and two coat of oil paint etcetera complete.

Conveying materials obtained from road excavation including all lifts and lead of over 5Killometer from the site of excavation to the site of deposition as directed.

Sub Estimate No. 3 : Concrete Road Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etcetera complete . (Prior approval of sample stack of broken metal by the Executive Engineer is necessary the date of approval will form part of the measurements) a) 80 millimetre Metal, By breaking Boulders (Hand broken).

LABOUR RATE : Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etcetera complete . (Prior approval of sample stack of broken metal by the Executive Engineer is necessary the date of approval will form part of the measurements) a) 80 millimetre Metal, By breaking Boulders (Hand broken).

Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etcetera complete . (Prior approval of sample stack of broken metal by the Executive Engineer is necessary the date of approval will form part of the measurements) a) 40 millimetre Metal, By breaking Boulders (Hand broken).

LABOUR RATE : Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etcetera complete . (Prior approval of sample stack of broken metal by the Executive Engineer is necessary the date of approval will form part of the measurements) a) 40 millimetre Metal, By breaking Boulders (Hand broken).

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Supplying soft murum at the road site, including conveying and stacking complete.

Spreading 80/40 millimetre metal for road work including sectionong etcetera complete as directed by Engineer in charge .

Spreading hard murum/ soft murum/ gravel or kankar for side width complete

Compacting the sub grade/gravel/oversize metal (200 millimetre loose) layers for all width with Power roller having weight 8 to 10 Metric Tonne including necessary, labour, materials and artificial watering complete.

Compacting the sub grade / gravel / size metal (100 millimetre loose) layers for all widths with Power roller having weight 8 to 10 Metric Tonne including necessary, labour, materials and artificial watering complete.

Providing and laying Cast in situ / Ready Mix cement concrete M-10 of trap metal for foundation and bedding including bailing out water if required, formwork, laying/pumping, compacting, finishing uneven and honey combed surface if required, curing etceteraetera. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with fine aggregate as finely washed Natural Sand / Vertical shaft Impactor Grade Crushed sand etcetera. complete as directed including all leads and lifts.

Providing and laying in situ cement concrete M20 with tremix treatment for 100 millimetre thickness for flooring with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen etcetera complete. (Including all leads and lifts as directed)

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters TISCON, SAIL ,TATA Steel, RINL (Rashtriya Ispat Nigam Limited - Vizag), JSW or with embossing of Indian Standard Institution Trade Mark and Thermo Mechanically Treated T Brand at every 1.00 meter interval on every bar confirming to Indian Standard 1786 for Reinforced Cement Concrete footings, columns, beams, lintels, chajjas, canopies, slabs, staircase, waist slas, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with Galvanised Iron binding wires of appropriate gauge and supporting etcetera complete as required including all leads and lifts.

Conveying materials obtained from road excavation including all lifts and lead of over 5Killometer from the site of excavation to the site of deposition as directed.

Providing and casting in situ or precast tapering Reinforced Cement Concrete M-20 Semi Barrier type Kerb without gutter ( as per Indian Road Congress 86 1983) embedded 125 millimeter below ground level over M-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Sub Estimate No. 4 : UG Water Tank (Fire & Domestic) Excavation for foundation in earth, soil of all types, sand, gravel and soft murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in hard murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including leads and lifts.

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. as directed including all leads and lifts.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etcetera including removing the excavated material up to required distance beyond the building area, stacking and breaking of boulder to suitable size and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Providing and laying Cast in situ / Ready Mix cement concrete M-10 of trap metal for foundation and bedding including bailing out water if required, formwork, laying/pumping, compacting, finishing uneven and honey combed surface if required, curing etceteraetera. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with fine aggregate as finely washed Natural Sand / Vertical shaft Impactor Grade Crushed sand etcetera. complete as directed including all leads and lifts.

Providing and laying in situ /Ready Mix cement concrete Mix 20 oftrap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering, formwork ,cover blocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of Mix 35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal forReinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location etcetera complete. With fine Aggregate( Crushed sand/Vertical Shaft ImpactorGrade) including all leads and lifts as directed.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters TISCON, SAIL ,TATA Steel, RINL (Rashtriya Ispat Nigam Limited - Vizag), JSW or with embossing of Indian Standard Institution Trade Mark and Thermo Mechanically Treated T Brand at every 1.00 meter interval on every bar confirming to Indian Standard 1786 for Reinforced Cement Concrete footings, columns, beams, lintels, chajjas, canopies, slabs, staircase, waist slas, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with Galvanised Iron binding wires of appropriate gauge and supporting etcetera complete as required including all leads and lifts.

Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete including all leads and lifts.

Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etcetera to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etcetera complete.

Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete as directed. (including all leads and lifts)

Providing and fixing Ductile iron manhole cover of light/medium/heavy duty with frame of any size over inspection chamber etcetera complete (Prior permission of Superintendent Engineer is to be obtained before inclusion of this item in the estimate)

Conveying materials obtained from road excavation including all lifts and lead of over 5Killometer from the site of excavation to the site of deposition as directed.

Providing and fixing 45 centimetre wide mild steel ladder of 40 millimetre x 6 millimetre mild steel flat stringers and steps of 18 millimetre diametre mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre and painting the ladder etcetera complete as directed. (Anti Corossive Paint)

Sub Estimate No. 5 : Entrance Gate Excavation for foundation in earth, soil of all types, sand, gravel and soft murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in hard murum including removing the excavated material up to required distance beyond the building area, stacking and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including leads and lifts.

Excavation for foundation in hard murum and boulders including removing the excavated material up to required distance beyond the building area, stacking breaking of boulder and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etcetera including removing the excavated material up to required distance beyond the building area, stacking and breaking of boulder to suitable size and spreading as directed, dewatering if required, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete as directed including all leads and lifts.

Providing and laying Cast in situ / Ready Mix cement concrete M-10 of trap metal for foundation and bedding including bailing out water if required, formwork, laying/pumping, compacting, finishing uneven and honey combed surface if required, curing etceteraetera. complete with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with fine aggregate as finely washed Natural Sand / Vertical shaft Impactor Grade Crushed sand etcetera. complete as directed including all leads and lifts.

Filling in plinth and floors with approved excavated material including watering and compacting after laying them in layers of 15 centimetre to 20 centimetre etcetera complete as directed. (including all leads and lifts)

Providing dry trap rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etcetera complete as directed. (including all leads and lifts)

Providing and laying in situ /Ready Mix cement concrete Mix 20 oftrap metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etcetera including bailing out water, Steel centering, formwork ,cover blocks, laying/ pumping, compaction and curing roughening the surface if special finish is to be provided fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of Mix 35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal forReinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge of required size with steel chairs at sutaible spacing at 1.50 metres centre to centre near the edge of each side and at centre when the width is more than 75 centimeter to reinfocement to give a clear cover of 40 millimeter to 65 millimeter from all sides as per Indian Standard .456-2000 with natural sand /Vertical Shaft Impactor quality artificial sand etcetera and suppling corrosion inhibiting admixture in concrete in every part POLYALK CP 293 of approve make, non-nitrite based corosion inhibiting admixture to be added at a dose of 3 kilogram / cubic meter of concrete etcetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap metal forReinforced Cement Concrete chajja as per detailed designs and drawing or as directed including centering, formwork, laying/pumping, compaction and curing, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location including providing and placing Poly Vinyl Chloride / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge M-35 grade of required size with galvanised binding wire of appropriate gauge at the rate of 27 Numbers per 10 Square metre to reinforcement to give required clear cover as per Indian Standard.456-2000 with steel chair at suitable size natural sand /Vertical shaft Impactor. quality artificial Sand etecetera complete as directed.(excluding reinforcement and structural steel) including all leads and lifts.

Providing and laying Cast in situ/Ready Mix M 20 grade cement concrete of trap metal for Reinforced Cement Concrete coping to plinth or parapet at terrace level and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks / precast concrete cover blocks of M-35 grade with galvanised binding wire of appropriate gauge as required, laying / pumping, compacting, curing, finishing or roughening the surface if special finish is to be provided, curing with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Acquisition The concrete shall be mixed by Ready Mix Concrete Plant as mentioneed and transported and pumped to the desire location with natural sand / Vertically Shaft Impactor quality Artificial Sand etcetera complete as directed. (Excluding reinforcement and structural steel). (including all leads and lifts)

Providing and fixing in position Thermo Mechanically Treated - FE - 500 bar reinforcement of various diameters TISCON, SAIL ,TATA Steel, RINL (Rashtriya Ispat Nigam Limited - Vizag), JSW or with embossing of Indian Standard Institution Trade Mark and Thermo Mechanically Treated T Brand at every 1.00 meter interval on every bar confirming to Indian Standard 1786 for Reinforced Cement Concrete footings, columns, beams, lintels, chajjas, canopies, slabs, staircase, waist slas, pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with Galvanised Iron binding wires of appropriate gauge and supporting etcetera complete as required including all leads and lifts.

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etcetera as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etcetera and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete.

Providing fly ash brick masonry with conventional / Indian Standard type fly ash bricks in Cement Mortor 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete as directed including all leads and lifts.

Providing fly ash brick masonry with conventional/ Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera Complete as directed including all leads and lifts.

Providing Second class fly ash brick masonry with conventional / Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 millimetre diameter / two hoop iron strips 25 millimetre x 1.60 millimetre at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etcetera complete as directed including all leads and lifts.

Providing and applying two coats of wall care putty of approved make on plastered surface and ceiling and walls to prepare surface even and smooth to receive painting , etcetera complete as directed.

Providing internal cement plaster 12 millimeter thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick or Autoclved Areaclaved Concrete bloack surfaces in all positions including scaffolding and curing etcetera complete as directed. (including all leads and lifts)

Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etcetera complete.

Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete

Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete including all leads and lifts.

Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete.

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete as directed. (including all leads and lifts)

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously finished plastered surface including Plaster Groove 6 millimeter thickness or Tape Grooves 35 to 45 millimeter thickness or as required, in all position including preparing the surface scaffolding etceteracomplete.

Providing patti/ band 150 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick at terrace level in Cement Mortor 1:3 in line and level including neat finishing, scaffolding, curing etcetera complete as directed.

Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforced Cement Concrete members and brick/ Autoclaved Areaclaved Concrete block work, of approved quality including fixing mesh in position by necessary drilling in concrete / Burnt Brick masonry/ Autoclaved Areaclaved Concrete block masonry and/ or tying by binding wire etcetera complete as directed including all leads and lifts.

Providing and laying polished hand cut Kotah Stone flooring 25millimetre to 30millimetre thick and 45 centimetre to 55 centimetre wide in plain/diamond pattern on a bed of 1:6 Cement Mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete.

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimeand meter rooms including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning etcetera complete as directed. (Including all leads and lifts)

Providing and laying Antiskid Ceramic tiles of approved quality of company Johnson /RAK / Kajaria / Nitco / Asian or equivalent make of size 30 centimetre x 30 centimetre and confirming to Indian Standard 15622-2006 (Group-B HA) for antiskid flooring in toilet area laid on a bed of cement mortar 1:4 including cement float, filling joint with cement slurry cleaning curing etcetera complete as directed. (Including all leads and lifts)

Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding Indian Standard for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick of approved color and shade for boxing to toilet doors, window and ventilator frames etcetera at approved locations on Cement Mortor 1:6 including filling joints with polymer base filler, moulding / nosing the sharp edges wherever necessary, curing, cleaning etcetera complete as directed including all leads and lifts.

Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of Cement mortar 1:4 including float filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete as directed.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete.

Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etcetera complete.

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding Indian Standard of Asian / Nerolac / Berger/ Dulux/ Shalimar make and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete as directed.

Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, approved chromium plated fixtures and fastenings with brass mortise lock, approved chromium plated handles on both sides and finishing with french polish etcetera complete as directed.

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per Running metre. with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per Running metre. Top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per Running metre. The shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per Running metre. Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per Running metre. and handle and top section 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera complete. With powder coating with box

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete.

Providing and fixing mild steel grill work for windows, ventilators etcetera 20 Kilogram Per One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providing Waterproofing Treatment to new terrace by using Chlorinated paraffinated talcum polyurethane (CPTP) elastomeric membrane as approved by Engineer in charge. , followed by average 112 millimeter thick brick bat coba covered with 40 millimeter thick Indian Patent Stone. The procedure includes fillng of cracks on the Reinforced Cement Cncrete slab with high performance polyurethane (liquid appiled) membrane. Clean the entire surfec thoroughly and over this prepared surface , apply a primer coat of high performance polyurethane (liquid applied) membrane as approved by Engineer incharge. Apply he primer by roller. Extend the coating to parapet walls including the top of parapet . Alow the primer coat to set for 24 hours. After the primer coat is set , apply two coats of clorinated paraffinated talcum polyurethane (CPTP) Elastomeric membrane as approved by Engineer incharge on surface. (including all leads and lifts)Ensure that pinholes are touched up properly. while the second coat og high performance polyurethane (liquid applied) membrane is wet and taky , sprinkle coarse sand over the surface to make it rough and provide mechanical key for further treatment. Provide and lay average 50mm thick protective coat of Cement Mortar in 1:4 over the surface and allow to set and cure. Provide and lay 112 millimetre thick Brick bat coba in average thickness in cement mortar 1:5 with one pouch of 330 grams of thorough blend of special cement , adlehyde based polymer , shrinkage compensating agents as approved by Engineer incharge per 50 kilogram bag of cement and finshing with 40 millimetre thick Indian Patent Stone layer in M20 Cement Concrete by miing one pouch of 330 grams of above admixtures per 50 kilogram bag og cement , including all leads , lifts and laid to proper slope to drain off water entirely preparing bell mouth including watta , bevel of champhered portion at the junction of parapet and work upto height of 300millimetre or as directed and including finishing the top layer of water proofing treatment. with false marking of 30 centimetre X 30 centimetre or as directed , curing and covering the whole treatment. The liqud membrane should have a track record of at least 4 years in india and have atleast an 4 year track record in PWD .Single component, liquid applied, chlorinated paraffinated talcum polyurethene( CPTP) elastomeric membrane should have following minimum properies :1) Water Permeability (DIN 1048 ): Nil as per DIN 1048 @ 7 bar of Hydrostatic pressure. 2) Moisture permeability : <0.4 grams per Square metre per day 3) Accelerated weathering (Indian Standard 101) : 2000 hours no cracking / blister formation 4) Adhesion to concrete (ASTM D 1000 ) :>21 kilogram per cubicmetre 2 (concrete fails) 5) tensile strength :> 2.0 Mega Pascal (ASTM D412 ) 6) should not be watered soluble are water dilutable 7) Shore a hardness : 40+_ 5 (ASTM D2240 ) 8) Elongation at break : > 900 percent (ASTM D 412 ) 9) Solids : > 95 percent 10) No micro -bubble formation or blistering should take place during the curing of thick films.

Providing and fixing on walls / ceiling / floor 15 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed.

Providing and fixing on walls/ceiling/floor 25 millimetre diametre Chlorinated Poly Venyl Chloride pipe of Finolex/ Supreme/ Jain /Astral make for water supply including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clip nut bolt with necessary fittings, remaking good the demolished portion etcetera complete as directed.

Providing, laying and fixing Poly Vinyl Chloride pipe of 110 millimetre diameter of Finolex/ Supreme/ Jain /Astral make for soil / vent pipes including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clamps nut bolt with fittings such as bends, tees, reducers etcetera including necessary excavation, trench filling etcetera complete as directed.

Providing, laying and fixing Poly Vinyl Chloride pipe of 75 millimetre diametre of Finolex/ Supreme/ Jain /Astral make for soil / vent pipes including fixing Galvanised Iron bracket of required size to keep the pipe 40 to 65 millimetre away from face of walls and fixing with U clamps nut bolt with fittings such as bends, tees, reducers including necessary excavation, trench filling etcetera complete as directed.

Providing and fixing 15 millimetre diameter Quarter Turn bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing Chromium Plated BIB cock with wall flange of approved make including necessary sockets/ union nut etcetera complete.

Providing and fixing 10 centimetre Poly Venyl Chloride Nahani Trap with grating etcetera complete.

Providing and fixing European type white glazed earthenware water closet pan of Hindware / Cera / Jaquar/Parryware/ Jonhson make with Unplactised Poly Vinyl Chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplactised Poly Vinyl Chloride soil and vent pipe up to the outside face of wall, 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 millimetre diametre Unplactised Poly Vinyl Chloride flush pipe with fittings and clamps , 20 millimetre diametre Unplactised Poly Vinyl Chloride overflow pipe, mosquito proof couplings with water Jet and fitting including cutting and making good to the walls and floors testing etcetera complete as directed.

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55 centimetre x 40 centimetre size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including Poly Vinyl Chloride waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etcetera complete.

Providing and fixing 450 millimetre x 550 millimetre size superior type Belgium mirror with 16 milimetre diametre nickel plated towel rod etcetera complete.

Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre average depth including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, brick masonry, plastering from inside and with frame fixed in cement concrete with Reinforced Cement Concrete Cover etcetera complete as directed. (including all leads and lifts)

Providing and fixing heavy duty reinforced cement concrete cover of 225 kilogram of size 90 centimetre x 45 centimetre with frame over inspection chamber etcetera complete as directed.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Providing and fixing 40 milimatre dia Ball cock medium type with Poly Vinyal Chloride float including sockets and necessary fittings and tested as per municipal requirements etcetera complete.

Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 millimeter thick Alluminium Composite Panel sheet material consisting of 3 millimeter thick FR grade mineral core following National Building Code part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 millimeter thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based polyvinylidene fluoride/Lumiflon based fluropolymer resin (having 70:30 ratio of polyvinylidene fluoride and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etcetera overall weight of the Alluminium Composite Panel shall not be less than 7.5 killogram per square meter)

Providing and Fixing Mat finish Stainlesss Steel (School Building Name) 30 to 45 Centimetre Height As Directed by Engineer-in-Charge including Labours, Material, Cleaning, Scaffolding, all leads and Lifts etcetera Complete.

Chapter: 1 WIRING (WG) 1.1 Concealing of Conduits (WG-MA/CC) Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

1.2 PVC Flexible/Rigid Conduits/Casing-n-Capping/Under Floor Trunking/Raceways and Box System (WG-MA/CON) Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting PVC box trunking of size 75x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX.

Supplying and erecting PVC slotted box trunking of size 75x75 mm. with accessories on wall/ceiling as per specification No: WG-MA/SLBOX.

1.3 Bunch of Wires (WG-MA/BW) Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting GREEN EARTH with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire for earthing laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire for earthing laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

1.6 Modular switches and Accessories Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table.

Point Wiring (PW) 1.7 Point Wiring (WG-PW) Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

2.1 Indoor LED Fittings (FG-IDF/LED) Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 1) Driver and luminaire shall be of same make. 2) LM79 and all other reports of all luminaires shall be from accredited NABL laboratory. 3) Manufacturer Logo shall be embossed on all pressure die cast Luminaires and logo shall not be screen-print / sticker type. 4) All luminaires shall conform to respective IS.

2.3 Accessories for Indoor Fittings (FG-AS) Supplying and erecting double suspension heavy duty lacquered iron chain with hooks for erecting fluo. tube light fitting(for erecting various fixtures like FTL, LED, etc) with necessary shielded copper flexible wire three core of 1 sq mm for connecting leads. (for measurements half of the actual length used)

Supplying and erecting Electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply.

2.10 Fans (FG-FN) Supplying and erecting energy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

2.11 Accessories for Fans (FG-FN) Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

1.8 Telephone, Audio and Video Wiring (WG-TW/TW) Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-11 as per specification No. WG-TW

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 15m Audio Video cord low voltage grade as per specification with required 3RCA x 3RCA connector complete.

Supplying & erecting HDMI Extender Over RJ45 Ethernet Cable Cat 6, 60m/200ft complete.

1.9 Telephone Accessories (WG-TW/TA) Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 100x100 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 200x200 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, erecting & commissioning 100 pairs M.S. junction box made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying & erecting over voltage protection magazine suitable for 10 pair as per specification no. WG-TW

Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete.

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

3) Add Rs. 22025.00 for additional 8 trunks lines card for digital (hybrid) type EPABX

1) Add Rs. 38159.00 for additional 16 extension card for digital (hybrid) type EPABX

Supplying, installing, testing & commissioning push button telephone instrument desk top unit as per specification complete

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.

Supplying & installing expansion cabinet for extension of digital hybrid EPABX to expand system by 32 ports with programming and configuration of extensions and Direct lines with required accessories complete.

1.10 ELV Cabling (WG-COC) Supplying and installing enhanced cat-6 LSZH cable with 4-connector channel Performance test report as per ANSI/TIA-568.2-D suitable for networking complete as per specification.

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC

Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying and fixing multimode pigtails with SC/SC type splicing for (OM4) complete.

Supplying and fixing IP66 enclosure for fibre splicing complete.

1.11 Networking Components (WG- NWC) Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS

Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL

Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete.

1.12 Networking Accessories (WG-NAS) Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch panel complete as per specification no. WG-NAS/KJ

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 42 U floor mount server rack (Dimension-DxWxH – 800x1000x2070 mm) as per specification No. WG-NAS/RAK

Supplying and fixing dual-band manageable wireless 3x3 Mesh Router, high performance, 802.11 n/ac unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2

Supplying, installing and activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete.

7.1 LT Cables (Aluminium) (CB-LT/AL) Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

7.2 LT Cables (Copper) (CB-LT/CU) Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 25 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V. 1 core 35 sq. mm. copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

7.11 Cable Tray (CB-CT) Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. 1) Standard accessories shall typically include : a) 'Z' section support - 30 x 35 mm in size - 312 mm in length - 6 nos. support for one piece ladder of 2.5 m in length each. b) Anchor fastener & nut bolts of adequate size - 16 nos. (2 nos. per support) c) Coupler plates with hardware - 70 x 200 x 3 mm thick - 2 nos. for each piece of 2.5 m ladder complete with necessary accessories such as reducer, horizontal elbow & tee, up & down vertical elbow & bends, cross piece complete. 4) Both type of cable trays shall be earthed properly.

Chapter: 3 APPLIANCES (AP) 3.3 Water Coolers & Refrigerators (AP-WC) Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 40 litres per hour and storage capacity 80 litres with partially stainless steel body As per specification no. APWCR/ WC

3.5 Water Purifiers (WPF) Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Chapter: 5 SWITCHGEARS (SW) 5.3 LT - MCBs/ MCB (SW-MCB) Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board.

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board.

5.4 LT - MCBDBs (SW-MCBDB) Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting blanking plate of suitable size on MCBDB. 1) All MCBs shall have rated short-circuit breaking capacity not less than 10kA. 2) Reduce rate by 5% if angle iron frame/ GI frame is not required. 3) For more than 2 kW load RCCB shall invariably be provided & erected preferably in the same distribution board. (RCCB+MCB) or (RCCB+MCCB etc.). Separate box for RCCB/ELCB is not permissible. 4) DBs and allied switchgears must be of same make. 5) DBs with IEC 61439 part 1 & 3 and minimum IK 08 rating shall be preferred.

5.7 MCCB Panel Boards and Accessories (SW- SWR-MCCBPB) for floor wise Distribution Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs)

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.

5.11 Accessories for MCCB's Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8)

Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)

6.5 Accessories Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

5.6 RCCB / RCBO (SW-RCCB) Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

5.8 LT - Air Circuit Breakers (SW-ACB) For Main LV panel Supplying, installing, testing and commissioning air circuit breaker manual fixed type, non-drawout type, 650V, 630A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB

Supplying, installing, testing and commissioning air circuit breaker electrical drawout type, 650V, 1000A rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection) 50 kA (Ics=Icu=Icw for 1s),with standard accessories with ready to close indication, individual fault trip indication, indications for alarm and trip, mechanical and electrical anti pumping, soft/hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB

6.1 Sheets Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. M. S. Sheet 2 mm, Size of L.T. Panel 3 Mtr X 2 Mtr X 1 Mtr = 28 Sq. Mtr. @15.7 Kg/Sq.mtr = 484 Kg outdoor installation Double door with canopy

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. MS angle 50 * 50 * 6 mm = 22 meter @ 3.8 kg/meter

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard GI sheets in compliance with IS 227.2003

6.2 Bus bars (CP-BB) Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB , 2000Amp Size: 100 mm x 10 mm x 2 Nos. x 4 nos. x 3 meters Nut, bolts holding the lugs to bus bar shall be of bimetallic/ brass/ cadmium plated steel.

6.3 Measuring Instruments Supplying and erecting Intelligent flush mounted panel meter three phase four wire (IPM) input voltage measurement range 50-550 V AC (P-P) 415V, aux. supply 90-300 V AC/DC, flush mounted (96 x 96 mm) meter constant Wh viewing in LCD multifunction meters in auto scroll mode with voltage, current, frequency, power factor kW, kVA, kVAR, kWh, kVAh, kVARh, phase angle, interrupts, THD, complete with RS 485 communication protocol, class 1 accuracy and wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting three phase 10 to 60 A net meter DLMS compliance of accuracy class 1.0, 3 x 240V, 50 Hz, with backlit LCD display, optical port and RJ 232 port (measures import kWh, kVAh, export kWh, kVAh, Net kWh, kVAh, V, I, kW, 6 months history of energy) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

6.7 Energy Devices (Harmonic Filter, APFC Panel) (CP-ED) Supplying and erecting 250 kVAr, 3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC

6.8 Sandwich Bus Bar Trunking System Supplying, erecting ,Testing & commissioning Ceiling or wall Mounting type 630A Capacity at 40oC ambient temperature Sandwich type Aluminium Conductor tin plated at joints /Aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% with suitable for (3L+ N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54/55 Protection,36/40KA short circuit rating for 1sec, Insulation Class F (155 C) , casing made of minimum 1.5mm hot dipped / electro Galvanized /Epoxy powder coated steel sheet enclosure having Mechanical strength certification up to IK10 with required shade of paint having overall cross sectional area not more than 0.0170 sq. Mtr., complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with Horizontal / Vertical G.I. Support at required interval with External Double run 50x5mm Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification

Supplying, installing, testing and commissioning of Flange end with Adaptor box, as per site requirement suitable for Aluminium 630A 3 phase 4 wire 415V, 50 Hz A.C ,36/40kA short circuit rating for 1 sec Sandwich type Aluminium BBT. with necessary accessories complete

Supplying, installing, testing and commissioning air circuit breaker manual fixed type, non-drawout type, 650V, 630A, rated at 50º C without deration, 12kV Impulse, 4 pole (100% Neutral Protection), 50 kA (Ics=Icu=Icw for 1s), with standard accessories with ready to close, individual fault trip, alarm and trip indications, mechanical and electrical anti pumping, soft/ hard rating plug (including hard rating plug CT) with Micro-processer based LCD display release with LSIG and temperature rise protection & with 4 C/O contacts for On-Off-Trip indication, min. 5 event and trip history on breaker display on provided iron frame as per specification no. SW-SWR/ACB

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 125A to 200A 3 phase 4 wire 415V, 50Hz AC Supply made with 1.5 mm thick sheet metal enclosure (IP54/55) duly powder coated with provision of MCCB( without MCCB) complete as required confirming to IEC 61439-6 as per specification

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 250A to 400A 3 phase 4 wire 415V, 50Hz AC Supply made with 1.5mm thick sheet metal enclosure (IP54/55) duly powder coated with provision of MCCB( without MCCB) complete as required confirming to IEC 61439-6 as per specification

Providing & erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB

Supplying, installing & Commissioning of Plug in Points on provided Sandwich type Aluminium Compact bus trunking/ rising mains Suitable for 630A, 3 Phase 4 Wire 415 V, 50 Hz AC Supply,,36/40KA short circuit rating for 1sec Made of minimum 1.5mm Thick Galvanised sheet metal enclosure (IP54/55) duly powder coated with all necessary accessories complete.

Chapter: 3 APPLIANCES (AP) 3.2 Air Conditioners (AP-AC) Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete.

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 16mm complete.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.

3.11 VRV/VRF Air conditioning Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 24HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV for IDU

Supplying and erecting PVC insulated PVC round sheathed 4 sq.mm (56 no. x 0.30 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV IDU

ENERGY SAVING DEVICES (ESD) 4.7 Electric Vehicle Charger (ESD-EVC) Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification.

Supplying, erecting, testing and commissioning of 30 kW DC Electric Vehicle Charger (suitable for 4 wheeler) having minimum IK08 & IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming supply and 1 nos 30kW output charger interface CCS2 with 200-500VDC supply, Interlocking arrangement with minimum 4 meter charging cable length, 5" LCD Touch Screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, One hour battery backup for communication, emergency push stop button. User interface by mobile application/QR Code/RIFD Card/Password Login with payment options and having short circuit, over & under voltage, input phase reversal, surge protection, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification

Providing yearly subscription of payment gateway option for AC/DC EV Charger CMS (Charger management software) system for billing and payment gateway along with mobile application /android/IOS base app to facilitate charging, CMS should have ISO/IEC 27001:2003 certification.

5.7 MCCB Panel Boards and Accessories (SW- SWR-MCCBPB) for EV charging Providing & erecting floor/wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 8 ways Four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCBs)

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.

5.11 Accessories for MCCB's Supplying and erecting terminal spreaders suitable for 4 pole, up to 100A MCCB (Set of 8)

Supplying and erecting terminal spreaders suitable for 4 pole, above 100A up to 250A MCCB (Set of 8)

6.5 Accessories Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Chapter : 8 OVER HEAD SYSTEMS (OH) 8.1 Steel Poles (OH-PL) Supplying and erecting steel tubular swan neck swaged type welded pole with upper portion hydraulically bent , 165.1 x 139.7 x 114.3 mm dia with 4.5 x 4.5 x 3.65 mm thickness (5.6+2.7+2.7 m) respectively total (net vertical height 10 m.) 11 m long with base plate in provided foundation. (weight 175 kg) as per specification no. OH-PL/STP

8.2 Hot Dipped Galvanized Poles & High-Mast (OH-HM) Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OH-PL/HM (excluding luminaries)

Highmast Control Panels Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. Rates are inclusive of foundation.

9.1 Plate, Pipe type Earthing (EA-EP) Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

2.4 Outdoor Fittings (FG-ODF/LED) Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

7.8 Street Light Boxes & Cable Indicators (CB-SB/CB-CIP) Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable as per specification No. CB-CIP

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB

16.3 C.C. Foundation Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Sub Stations 10.1 Non-sealed transformer Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 630 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 1860 Watts at 50% load, 5300 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.

Supplying, installing, testing and commissioning 11 kV 630A, indoor type ring main unit with 1 VCB & 2 LBS with internal arc compliance complete erected on provided CC foundation/MS channels/trench, etc., as per specification no SW-HTS / RMU

10.6 Accessories Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG

Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m long fixed at the middle of the fencing frame and the other side inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.

Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD

Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.).

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Providing pair of duly tested rubber hand gloves as per IS :47705 suitable for working up to 22 kV supply complete.

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 having 2 mm thickness up to 3.3 kV

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV

Generators (GEN) 11.1 Generators (GEN-GEN) Supplying, erecting, testing and commissioning of diesel generating set with alternator of 380/400 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 65.5 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 450 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG 2) For all the Engines, the emission standards/norms shall meet applicable pollution control board norms as amended by Government.

11.2 Auto Mains Failure Panels (AMF Panels) (GEN-AMF) Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for Diesel Generating Set of above 320 kVA up to 400 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

9.1 Plate, Pipe type Earthing (EA-EP) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. GI strip 50X6 mm = 2.14kg/meter. Hence for 340 meters - 340*2.45 = 833 kg

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. Cu strip 50X6 mm = 2.67kg/meter. Hence for 280 meters - 280*2.67 = 748 kg 1) Resistivity of the soil shall be checked and no. of back filling ground enhancing compound bags shall be used as per guidelines elaborated in specification No. 2) Additional G.I. pipe required from earth pit and GI / Copper wire / strip more than 8 m in length from earth pit to installation to be provided separately.

9.3 Lightning Conductor and Accessories Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Providing and back filling ground enhancing compound 25 kg bag complete.

7.3 HT Cables (CB-HT) Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 300 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

7.5 Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

7.6 Cable Enclosures (CB-CE) Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

6.4 H. T. Metering Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

16.2 Masonry Work Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (1.7 × .9 × 1.2 × 10 nos.)

Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete.

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram).

CCTV 14 CCTV System (FF-CCTV) Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and installing cat-6 LSZH cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying, Erecting, Testing and Commissioning of Dome / Bullet Type IP Cameras Min 4 MP (2592x1520) resolution Built in 2.8 mm fixed lens 25 fps resolutions (H 265/H264) H 265 H264 MUPEG code C supported Multiple streaming Video Compression H265 H264 Image Sensor 1/3" Progressive Scan CMOS Illumination 0.5 lux (20Meter) Image Setting: Compression colour brightness sharpness contrast white balance exposure control backlight compensation Security Password Protection IP Address filtering user access Log, Operating Conditions10 to 55C. Casing:Tamper Resistant for Indoor Environment IK08 Sensor 1/2.9 MP CMOS. 1) Pixels per sensor: 2000 (H) x 1121 (V) total. 1984 (H) x 1105 (V) effective 2) scanning progressive 3) Day/night setting: True Day & Night 4)Backlight compensation (BLC):Off/On 4) WDR 120 dB 6)Digital Noise Reduction (DNR) : ON/Off. 4 Number of multi-streaming profiles: 3 maximum a.) The 4 MP camera shall have onboard SD card storage MUPEG code C supported Multiple Streaming. Motion detection, Tempering Defocus detection. Audio Mike Inbuilt Micro SD (128GB) memory slot POE/12V DC. IR viewable Length 20m. IP66 UK 10 LDC Support (Lens/Distortion Correction Certifications CE/UL. APPROVED MAKE:- SONY / SAMSUNG (WiseNET) Warranty: 3 Years

S/I/T/C 19" RACK MOUNTABLE NVR : SUPPORTS 32 CAMERAS Professional Series 4K HD net work, Video recorder-/smart H265+/H265/Smart 264+ max 384 Mbps in coming Band width up to 12MP resolution for preview and play back-Bit rate 16 Kbps 20 Mbps per channel-2 HDMI/2 VGA simultaneous video out put to enhance the storage reliability when the network break down Quad core embedded processor 8 SATA III ports up to 8 TB for each HDD for 48 TB storage 2 RJ 45 port ( 10/100/100 Mbps ) Independent of joint networking / Analytical futures like ANPRA people count face detection / Missing / Abandoned objects Tripwire and intrusion alarm smart FAN to achieve net work video recorder with the ANR function automatically store video data. Approved Make: Honeywell, Sony, Samsung. Warranty For 3 Years

Supplying and erecting Supply & erecting 8TB enterprise hard disk

Supplying, installing and activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete.

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, Installing, Testing & Commissioning of 40” Full HD Commercial LED LCD Signage Display with built in CPU and Ethernet / RS-232C ,remote control Inputs of VGA, HDMI,DVI-D, and RS232C built-in LAN card to access the network , with Smart Signage software [ samsung, Sony,] Warranty For 3 Years

Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of 20 min. PWM & IGBT based, with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/17Ah -18Ah SMF battery with battery terminal wire, duly charged with 12 months warranty complete

Chapter 13 : FIRE FIGHTING (FF) 13.1 Main Fire Pumps (Single Stage Centrifugal) (FF-MFP/SSC) Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850LPM at 80 to 60 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 45kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

13.2 Jockey Pumps (Centrifugal) (FF-MFP/JP) Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

13.4 Main Fire Pump Diesel Engine Driven (Centrifugal) (FF-MFP/DP) Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

For main electric motor driven fire hydrant system pump of 45kW capacity & relevant capacity jockey pump add Rs…. For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having 55 kW capacity & relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears busbar and additional motor starters for main & jockey pumps along with necessary accessories with software & hardware for main & jockey fire pumps additional Sprinkler system MFP=(1working)@22kW, JP = (1working+1standby, alternate run per start in auto mode) @relevant capacity

For main electric motor driven fire sprinkler system pump of 45kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode, add Rs….

13.6 Pipes (FF-PP) Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

End Line Strainer (positive suction) (ELS) Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Sluice Valve Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Butterfly Valves (BFV) Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Non Return Valve (NRV) Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Hydrant Valves (HV) Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV (Internal 16 Nos. + Courtyard 18 Nos.)

13.8 Fire Fighting Accessories (FF-FFA) Hose Reel with Drum (HR) Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Hose Pipes Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Nozzles (NZ) Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Fire Brigade Connection (FBC) Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Siamese Connection (SMC) Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC

Air Cushion Tank (Air Vessel) (ACT) Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Air Release Valve (ARV) Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Pressure Gauge (PG) Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Pressure Switch(PS) Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Orifice Plate(OP) Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

MS / CRCA Boxes (BOX) Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

13.12 Sprinklers (FF-SPR) Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

13.13 Fire Sealant System (FF-FRM) Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM. For estimating purpose consider 1 bag of 20kg to cover 300mm x 400mm area 150mm thick or 0.018 m3 Shaft size: .300*1.5*.2=0.09. Hence for 1 shaft 0.09/0.018=5 bags. Hence for 2 shafts per floor * 8 floor= 80 bags

13.15 Fire Extinguisher Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Epoxy painting on both side of approved colour shade of provided iron work / MS / CRCA sheet steel work complete along with anti-rust treatment complete.

Supply & Installation of Stainless steel finish rosette plate of dia 75 mm for below false ceiling application as per specifications

Supplying & erecting of Flexible hose pipe of 25mm dia with both end socket for fixing the sprinkler to ranger length of flexible piece 1500 mm complete as per specification ( Sprinkler System)

Supplying and erecting of FIRE EXIT & FIRE EXTINGUISHER signage indicating the floor number in words & system siganages. (FIRE EXTINGUISHERS & ACCESSORIES)

Supply and installation of 150mm installation Zone Control Assembly for sprinkler system as specified and shown on drawings and complete with: 1. Mains gate valve 2. Installation valve with retard chamber & motor gong. 3. Pressure gauges 4. Test connection with gate valve 5. All inter connected galvanised steel, piping, strainers, valves, drain piping etc. (NON CSR)

150mm Flexible coupling, Ductile iron, ASTM A536, grade 65-45, certificate: UL/FM/CE, pressure rate: 2.5MPA, paint finish

Supplying & erecting of Control Valve with turbine type automatic Alarm Gong to be connected with control valve drain & test valve and all other necessary components as per manufacturers specifications complete as required. complete as per specification (Sprinkler System)

Chapter 13 : FIRE ALARM SYSTEM (FF) Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

13.10 Intelligent Addressable Fire Alarm System (FF-AFAS) Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF-AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal/heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying, installing, testing and commissioning of digital linear heat detection cable addressable through monitor module with temperature ratings such as 60°-70°C, conforming to IS 2189: 2008, EN 54 or UL listed FF-AFAS/LHDC.

13.11 P A System (FF-PAS) Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating/powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.

LIFTS (LFT) 17-1 New Installation SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 800 mm wide x 2000mm high · Clear Car size of 1300 mm wide x 1100 mm deep x 2250 mm high · Lift shaft available having clear size of 1900 mm wide x 2000 mm deep, 1600 mm Pit depth, 4650 mm Overhead.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+7 floor (8 Stops/8 Landings) · Travel :- 21 to 29.4 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 2.12 mm wide x 3.17 mm deep, 1600 mm Pit depth, 4650 mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. · Lift controller of simplex full collective based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary Protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. ,various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength. · Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. "· General: - Job includes entire procedure of obtaining all necessary erection permissions & ""License to Work the Lift"" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning."

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

9.1 Plate, Pipe type Earthing (EA-EP) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. GI strip 25X6 mm = 1.25kg/meter. Hence for 400 meters - 400*1.25 = 500 kg

Providing, erecting & commissioning 4 pole RCCB 40A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, fixing and commissioning 2 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

CHAPTER 12: WATER PUMPS(WP) 12.1 Centrifugal pumps Supplying & erecting Minimum three & above star rated Centrifugal water pump (Monoblock), 415V, three phase 50 cycles A.C. supply of 2.25 KW/3 HP with discharge 600/110 Litres per Minute (LPM) for head of 13/43 m and 65 mm suction/ 50 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

Supplying & erecting minimum three & above star rated Centrifugal water pump (Monoblock), 415 V, three phase 50 cycles A.C. supply of 7.5 KW/10 HP with discharge 1150/600 Litres per Minute (LPM) for head of 24/69 m and 65 mm suction/ 50 mm delivery pipe of size, on provided C.C. foundation as per specification No. WP-CGP

12.2 Submersible pumps for Borewell (Wp-SMP) Supplying and erecting minimum Three & above star rated submersible pump set of 3 KW/4 HP with 415 V, 50 c/s AC supply suitable for 150 mm dia. borewell suitable for 130 to 390 LPM discharge at 64 to 18 m head & discharge & delivery Pipe of Size-50mm diameter with a necessary H type clamps as per specification No. WP-SMP

12.4 Accessories Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.C. Submersible/centrifugal pump set up to 7.5 HP - 10 H.P. consisting of DOL starter having relay range 13-21 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

Supplying & erecting Float sensor switch for water level controller working on 250V & rated current 8A, with 2 mtr. wire & High quality of wire & plastic body.

Harsh Constructions Pvt Ltd

Pawar Patkar Constructions Pvt.Ltd.